1. kc

Associate Professor
Phone: +91-7896820776
Email: kalyan[at]mech.nits.ac.in |
Date of Joining: 12/10/1984
Academic/Industrial Experience: 40 years
Google Scholar: Click Here

ACADEMIC QUALIFICATIONS (FULL DETAILS )

  • B. E.
  • M.Tech
  • Ph.D.

 

AREA OF INTEREST AND SPECIALIZATION (INCLUDING RESEARCH AREA)

  • Metal machining
  • Micromachining
  • Manufacturing Science
  • Material Science
  • Metrology
  • Quality Control.

SHORT BIOGRAPHICAL SKETCH

Dr. Kalyan Chakraborty obtained a B.E. degree in mechanical engineering from Regional Engineering College, Durgapur, under Burdwan University in 1984, an MTech from the Indian Institute of Technology, Kharagpur, in 1988, and a PhD in mechanical engineering from the Indian Institute of Technology, Kharagpur, in 1996. He has been serving at this institution since 1984. Presently, he is serving as an associate professor. He has written a number of journal papers and presented a number of papers at various national and international conferences. Based on one of his recent publications, he has been awarded a Quarterly Franklin Membership (London Journal Press) for 2019. Dr. Chakraborty also received letters of appreciation from chief authors/editors of publishing houses abroad during 2018–2019 for his other international paper. 990 views were reported by ScienceDirect (Elsevier) during 2009–2020, considering his publications. 26 citations were found (Scopus, ELSEVIER). Dr. Chakraborty recently (2020) received honorary Rosalind (quarterly) membership of the London Journal Press on the basis of a published paper. The paper was highly appreciated by the chief author (LJER). Dr. Chakraborty received a recommendation letter for the publication of a book based on his newly published paper during May–June 2020 from the editor. Recently, he reviewed the table of contents of Groover’s “Fundamentals of Modern Manufacturing. Dr. Chakraborty recently received a letter of appreciation from the managing director, Elsevier Journals, in connection with the newly published papers (SCOPUS) (ELSEVIER) (2023), as per the following part quotation: “Publishing academic research is a significant achievement, and your dedication to this endeavor does not go unnoticed. Your contributions continue to drive global research forward. Thank you for your hard work and commitment to your field. Once more, our sincere thanks from everyone at the journal: ”

PATENT(S)

EDITORSHIP

BOOKS/ BOOK CHAPTERS

  • Vaibhav Srivastava, Kalyan Chakraborty, The fuzzy logic model for machining data selection, Algorithms for intelligent systems, Springer, Singapore, 2024, pp 13-22, https://doi.org/10.1007/978-981-97-3526-6_2 (SCOPUS)
  • Sumit Mahajan, Kalyan Chakraborty, The application of the preference selection index method to find the best work- tool combination during machining, Advances in materials and agile manufacturing,   Lecture Notes in Mechanical Engineering  (LNME), Springer, Singapore, 2024, pp 29-36,  https://doi.org/10.1007/978-981-99-6601-1_4 (SCOPUS)
  • Jai Tiwary and Kalyan Chakraborty, The machining behavior of 52100 bearing steel, Lecture Notes in Mechanical Engineering  (LNME), Springer Nature Singapore Pte Ltd.  2023, pp 3-13, https://doi.org/10.1007/978-981-99-1288-9_1 (SCOPUS)
  • Sunil Kumar and Kalyan Chakraborty, The Chip Formation Mechanism for the Machining of the EN8 Unalloyed Steel, Recent Advances in Materials and Manufacturing Technology, Lecture Notes in Mechanical Engineering  (LNME), pp 1-9, Springer Nature Singapore Pte Ltd.  2023,  DOI: https://doi.org/10.1007/978-981-99-2921-4_1 (SCOPUS)
  • K. Anoop and Kalyan Chakraborty, The Application of TOPSIS Method for Optimization of Machining Parameters During Hard Turning of H13 Tool Steel, Springer Nature Singapore Pte Ltd. 2023, Recent Trends in Product Design and Intelligent Manufacturing Systems, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981-19-4606-6_72 (SCOPUS)
  • Vikram Pandey and Kalyan Chakraborty, The application of ANOVA and Taguchi-Fis simulation for performance evaluation of machining parameters and subsequent parametric optimization during dry turning of A356 (Al-Si) alloy, Springer Nature, Singapore Pte Ltd. 2023, Recent Advances in Mechanical Engineering, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981-19-2188-9_1 (SCOPUS)
  • Sumit Mahajan, Kalyan Chakraborty, The Effect of HSS and Carbide Tools on the Mechanism of Chip Formation During Turning of Medium Carbon Steel (AISI1030), Recent Advances in Manufacturing, Automation, Design and Energy Technologies, Springer Nature Singapore Pvt Ltd. 2022 pp 165-172, https://doi.org/10.1007/978-981-16-4222-7_19 (SCOPUS)

SUBJECTS TAUGHT (INCLUDING SUBJECTS CURRENTLY TEACHING)

  • Metal machining
  • Micromachining
  • Soft computing based on statistical methods
  • Data based programming on machining
  • Implimentation of fuzy logic for machining study
  • Materials Science
  • DFMA

MEMBER

1. Member of the Institution of Engineers (India)

2. Member of the Indian Society for Technical Education

AWARDS & RECOGNITIONS 

Dr. Chakraborty received the best paper presentation award for the paper entitled “The application of the preference selection index method to find the best work-tool combination during machining”,  7th international conference on production and industrial engineering, CPIE, 10–12 March 2023, Department of Industrial and Production Engineering, Dr. B. R. Ambedkar National Institute of Technology Jalandhar, 144027, India.

 

ADMINISTRATIVE RESPONSIBILITY

Worked as an assistant warden (hostel). Worked as a MTech admission coordinator. Worked as a workshop in-charge.

INTERNATIONAL JOURNALS

  1. Swarup De, Kalyan Chakraborty, Some studies on the mechanism of chip formation during machining of chromium manganese  austenitic stainless steel,  Eng. Proc. 2024, 66(1), 32.https://doi.org/10.3390/engproc2024066032, MDPI, (SCOPUS)
  2. Bhaskar Jyoti Saikia, Ansar Ahmed Khan, Sajad Haque, Sahil Ahmed Mazumder, Kalyan Chakraborty, Selection of optimal machining parameters by   Taguchi-Fis simulation during machining of high tensile low alloy steel , Advances in Science and Technology, vol. 130, pp-45-51, doi:10.4028/p-6M8LeY , 2023, Trans Tech Publications Ltd, Switzerland, (NASA Astrophysics Data System (ADS), http://www.adsabs.harvard.edu/, and Cambridge Scientific Abstracts (CSA), www.csa.com). (SCOPUS)
  3. Swarup De, Kalyan Chakraborty, The machining parameter optimization during the machining of the Cr-Mn austenitic stainless steel, 2023, Materials Today: proceedings, https://doi.org/10.1016/j.matpr.2023.07.090, ELSEVIER, (SCOPUS)
  4. Vishal Mishra, Kalyan Chakraborty, The application of the TOPSIS method to identify the optimal machining parameters during the machining of the Mg-Ca treated Nickel-Chromium (EN36C ) case hardened steel, Nano World Journal, Volume 9, Supplement 1, 2023,  https//doi.org/10.17756/nwj.2023-s1-043,  http://jnanoworld.com/v9s1/. (SCOPUS)
  5. Aby M. Philip, Kalyan Chakraborty  The Johnson Cook model for the machinability study, Materials Today: Proceedings, Volume 80, Part 1, 2023, Pages 357-362, https://doi.org/10.1016/j.matpr.2023.02.371,  ELSEVIER, (SCOPUS)
  6. Swarup De, Kalyan Chakraborty, The machining behaviour of Cr-Mn austenitic stainless steel, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2022.12.131, ELSEVIER, (SCOPUS)
  7. Vikram Pandey, Kalyan Chakraborty, The TOPSIS method to identify the optimal machining condition with reduced particle emission during  machining of the Al-Si based 1%SiC reinforced  nanocomposite material, Volume 76,  Part 2, 2023, Pages 341-345, https://doi.org/10.1016/j.matpr.2022.11.383, ELSEVIER, (SCOPUS)
  8. Aby M. Philip, Kalyan Chakraborty, Some studies on the machining behavior of 316L austenitic stainless steel, Materials today: Proceedings, Volume 56, Part 2, 2022, Pages 681-685, doi.org/10.1016/j.matpr.2022.01.132, ELSEVIER, (SCOPUS)
  9. V. Pandey, K. Chakraborty, Performances of machining parameters during dry turning of Al-Si alloy based 5% SiC nanoparticle reinforced nanocomposite material, International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 12, Issue 4, April 2021, pp.46-53, DoHET accredited (SCOPUS) 2021.
  10. V. Pandey, K. Chakraborty, influences of machining parameters during dry turning of Al-Si based 1wt% SiC nanoparticle reinforced nanocomposite material, International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 12, Issue 3, March 2021, pp.445-453, DoHET accredited (SCOPUS)
  11. Anoop K, Kalyan Chakraborty, The Effect of Material Behaviour on the Surface Roughness during Machining of H13 Tool Steel, International Journal of Engineering and Advanced Technology (IJEAT) Volume-9 Issue-5, June 2020, pp131-136, DOI: 10.35940/ijeat.E9440.069520
  12. Mishra V, Bharat N, Chakraborty K, Comparative assessment on the machinability of EN24 and EN36C steels, international journal of engineering and advanced technology, Volume-8 Issue-3, pp 106-115, February 2019 (SCOPUS)
  13. Nikhil Bharat, Dr. Kalyan Chakraborty, Machinability of en24 steel (817m40, International Journal of Latest Trends in Engineering and Technology, Vol 12) Issue (3), pp.001-007, January 2019, DOI: http://dx.doi.org/10.21172/1.123.01
  14. Vishal Mishra, Dr. Kalyan Chakraborty, Machinability of Nickel Chromium case hardened steel (EN36C), Global Journal of Research in Engineering, A Mechanical and Mechanics: Massachusetts, Incorporated, Governed by OAR Society, (United States), Vol. 19, pp 27-34, NO. A1 (2019), January 2019, DOI: 10.17406/gjre
  15. Chakraborty K., Chakraborty A.K., Chattopadhyay A.B. Development of forging quality high strength low alloy steels, ironmaking and steelmaking (2000),Taylor & Francis, Pages 394-395 | Published online: 18 Jul 2013, https://doi.org/10.1179/030192300677714, (SCIE)
  16. Chakraborty K, Chattopadhyay A.B., Chakraborty A.K., A study on the grindability of niobium micro alloyed forging quality HSLA steels, Journal of material processing technology, Volume 141, Issue 3, 1 November 2003, Pages 404-410. https://doi.org/10.1016/S0924-0136(03)00389-3, (SCIE)

NATIONAL JOURNALS

  1. Anoop K., Kalyan Chakraborty, Selection of Optimal Parameters Setting Through Taguchi -Fuzzy- FIS Simulation during Dry Turning of Inconel 718 , Journal of Basic and Applied Engineering Research, Volume-7, Issue-1; October-December, 2020 pp. 41-46 © Krishi Sanskriti Publications
  2. Sumit Mahajan, Kalyan Chakraborty and K.M. Pandey, Study on the Mechanism of Chip Formation Employing Material Properties Consideration While Machining Inconel 718, Journal of Material Science and Mechanical Engineering (JMSME) Volume 4, Issue 2; April-June, 2017 pp. 63-68 © Krishi Sanskriti Publications

 INTERNATIONAL CONFERENCES

  1. Neeraj Baishya, Kaushik Das, Karan Roy, Helemoon Ahmed, Kalyan Chakraborty, Optimal selection of machining parameters for minimization of elementary energy consumption during machining of 304 austenitic stainless steel, 7th International Conference on Material Engineering Research 2024, Jeju Island, South Korea, April 19-21, 2024 (SCOPUS)
  2. Neeraj Baishya , Kaushik Das , Karan Roy, Helemoon Ahmed and Kalyan Chakraborty , The elementary energy consumption during chip formation in machining, First international conference on advancement in energy (Urja Sangam 2023) 18th-20th December, Department of Mechanical Engineering, Motilal Nehru National Institute of Technology, Allahabad, Prayagraj-211004,  U.P., India (SCOPUS)
  3. Swarup De and Kalyan Chakraborty, Some studies on the mechanism of chip formation during machining of chromium manganese austenitic stainless steel, 5th innovative product design and intelligent manufacturing systems (IPDIMS 2023), 6th and 7th December 2023, Department of Industrial Design, National Institute of Technology, Rourkela, (SCOPUS)
  4. Vaibhav Srivastava and Kalyan Chakraborty, The fuzzy logic model for machining data selection, 4th international conference on computational intelligence (ICCI 2023), November 04-05, 2023, Sardar Vallabhbhai National Institute of Technology, Surat, India, Technically sponsored by Soft Computing Research Society,  (SCOPUS)
  5. Vaibhav Srivastava  and  Kalyan Chakraborty,, The machining data selection by using a fuzzy logic model, 1st International Conference on Mechanical Design and Manufacturing, ICMDM 2023, 27-28 April 2023. IIEST Mech Centenary Conferences & Symposia (CCS), 2023. Organized by Department of Mechanical Engineering, Indian Institute of Engineering Science and Technology, Shibpur, Howrah, 711103, India (SCOPUS)
  6. Sumit Mahajan and Kalyan Chakraborty, The application of the preference selection index method to find the best work-tool combination during machining,  7th international conference on production and industrial engineering, CPIE, 10-12 March, 2023, Department of Industrial and Production Engineering, Dr. B. R.  Ambedkar National Institute of Technology Jalandhar-144027, india  (SCOPUS)
  7. Bhaskar Jyoti Saikia, Ansar Ahmed Khan, Sajad Haque, Sahil Ahmed Mazumder, Kalyan Chakraborty, Selection of optimal machining parameters by   Taguchi-Fis simulation during machining of high tensile low alloy steel with validity check for the simulation result, Third International Conference on Future Technologies (ICOFT MADE 2022) in Manufacturing, Automation, Design and Energy, (Ministry of Science and Technology), 14 to 16 December 2022, Department of Mechanical Engineering, National Institute of Technology,  Puducherry, Karaikal – 609 609, India (SCOPUS)
  8. Swarup De, Kalyan Chakraborty, The application of the TOPSIS method to identify the optimal parameter setting during the machining of the CR-Mn austenitic stainless steel , International conference on 4th innovative  product design  and intelligent manufacturing systems,  25-26 November, 2022, N.I.T. Rourkela, India (SCOPUS)
  9. Sunil Kumar, Kalyan Chakraborty, The chip formation mechanism for the machining of the EN8 unalloyed steel, 2nd International Conference on Advances in Materials and Manufacturing Technology, ICAMMT -2022  22nd – 26th November, 2022, Organized by Department of Materials & Metallurgical Engineering In Association with Mechanical Engineering and Computer Science & Engineering,  Maulana Azad National Institute of Technology, Bhopal – 462003, India (SCOPUS)
  10. Swarup De, Kalyan Chakraborty, The machining behaviour of Cr-Mn austenitic stainless steel, International Conference on Advancement  in Manufacturing Engineering-2022, (ICAME – 2022), November 12-13, 2022, National Institute of Technology, Delhi, India (SCOPUS)
  11. Vishal Mishra and Kalyan Chakraborty, The application of the TOPSIS method to identify the optimal machining parameters during the machining of the Mg–Ca treated nickel-chromium (EN 36C) case hardened steel, International Conference on Innovations in Mechanical and Materials Engineering (IMME-2022), 4-6 November, 2022,  Department of mechanical engineering, Motilal Nehru National Institute of Technology, Allahabad, Prayagraj, U.P. India (SCOPUS)
  12. Aby M Philip, Kalyan Chakraborty, The Johnson Cook medel for the machinability study, 3rd international congress on advances in mechanical and systems engineering, 14th – 16th July, CAMSE 2022, Supported by CSIR, Ministry of Science and Technology, Govt., of India, Shobhit Institute of Engineering and Technology, Meerut, Uttar Pradesh,  In association wth STEM research society and Dr. B.R. Ambedkar N.I.T. Jalandhar, INDIA (SCOPUS)
  13. Vikram Pandey, Kalyan Chakraborty,  , The TOPSIS method to identify the optimal machining condition with reduced particle emission during machining of the Al-Si based 1% SiC reinforced nanocomposite material. International Conference on Nanotechnology for Sustainable Living and Environment, 14-16 April, 2022, Department of Chemical Engineering , Birla Institute of Technology and Science  Pilani, Pilani Campus, (SCOPUS)
  14. Aby M. Philip, Kalyan Chakraborty, Some studies on the machining behaviour of 316L austenitic stainless steel, ICMMM 2021, (4-6 March,2022), N.I.T.Jamshedpur., (SCOPUS)
  15. Anoop K, Kalyan Chakraborty, The Application of TOPSIS Method for Optimization of Machining Parameters during Hard Turning of H13 Tool Steel, 3rd Innovative Product Design and Intelligent Manufacturing Systems, N.I.T Rourkela, December, 30-31,2021, (SCOPUS)
  16. Jai Tiwari, Kalyan Chakraborty, The machining behaviour of 52100 bearing steel, International conference on future technologies in manufacturing automation, design and energy, Dec 16-18, 2021,N.I.T Puducherry. (SCOPUS)
  17. Vikram Pandey and Kalyan Chakraborty, The Applications of ANOVA and Taguchi – Fis Simulation for Performance Evaluation of Machining Parameters and Subsequent Parametric Optimization During Dry Turning of A356 (Al-Si) Alloy, 2nd international congress on advances in mechanical and systems engineering, Dr. B.R. Ambedkar National Institute of Technology, Jalandhar, Punjab,July17-19,2021 (SCOPUS)
  18. Sumit Mahajan, Kalyan Chakraborty, The Effect of HSS and Carbide Tools on the Mechanism of Chip Formation During Turning of Medium Carbon Steel (AISI1030), First international conference on future technologies in manufacturing, automation, design and & energy, N.I.T. Puducherry, 28th – 30th December,2020 (SCOPUS)
  19. Anoop K, Kalyan Chakraborty, Selection of Optimal Parameters Setting Through Taguchi -Fuzzy- FIS Simulation during Dry Turning of Inconel 718, International conference on engineering, technology, applied sciences, humanities & business management (ETAHBS 2020), 29th August, Krishi Sanskriti, Aryabhatt Institute of Technology, Govt. of NCT of Delhi, G.T. Karnal Road, Delhi 110033

NATIONAL CONFERENCE

  1. N. Bharat and K. Chakraborty, The effect of process parameters on the additively formed built up edge during machining of EN24 steel, 20th ISME conference on advances in mechanical engineering, 19th- 21st May, 2022, Organized by Department of Mechanical Engineering, Indian Institute of Technology, Ropar, Punjab, India, in association with  Indian Society of Mechanical Engineers (ISME), 20th ISME conference proceedings
  2. Anoop K, Kalyan Chakraborty, The optimal selection of machining parameters by TOPSIS method during machining of Inconel 718 (superalloy), 36th Indian Engineering Congress (36 IEC), 26-27 December 2021, The institution of engineers, India, New Delhi, The Technical Sessions of the Congress, 15-17 December 2021, Issue 2021: 36.IEC,doi.org/10.36375/prepare_u.iei.a166

WORKSHOP

CONFERENCE ORGANIZED

 

PHD SCHOLARS

 

Sl. No. Name of the Scholar Status Research Area Supervision

M.TECH. SCHOLARS

Roll Number Name Year

 Project Title