Dr. Sudipta Halder

sh

Associate Professor
Phone: +91-xxxxxxxxxx
Email: shalder[at]mech.nits.ac.in |
Date of Joining: 10/12/2012
Academic/Industrial Experience: 14+ years
Google Scholar: Click Here

ACADEMIC QUALIFICATIONS (FULL DETAILS )

  • B.E Mechanical Engineering (VTU)
  • M.Tech Materials Engineering (BESU/IIEST Shibpur)
  • Ph.D. (IIT Roorkee, Department of Metallurgical and Materials Engineering)
  • Post-Doc Center for Sustainable Infrastructure, Civil, Construction and Environmental Engineering, The University of Alabama, USA, Bhawan Fellow 2016-2017.
  • Post-Doc Aerospace Engineering and Mechanics, Center for Advanced Vehicle Technologies, The University of Alabama, USA, Bhawan Fellow 2020-2021.

SHORT BIOGRAPHICAL SKETCH

Dr. Sudipta Halder obtained his bachelor’s degree in Mechanical Engineering with distinction from Visvesvaraya Technological University in 2003. He completed his master’s degree from IIEST Shibpur in 2005. He embarked on focused research to develop high strength, high performance and cost effective nano-filler adhesive to be used in the joining of metallic substrates for his Doctoral degree at IIT Roorkee. The research work carried out by him is quite relevant to the advanced research of nanoscience and technology in order to support the cutting edge technology of advanced applications. The research work was very challenging and he fulfilled all the requirements to open a new direction of technology development in the area of polymer based nanocomposite materials.

He started his carrier as a Specialist Engineer in 2008 at Process & Technology division at Tata Consulting Engineers Limited. Later in 2012, he joined the National Institute of Technology Silchar (An Institute of National Importance by MHRD, Govt. of India) as an Assistant Professor in the Department of Mechanical Engineering promoted to Associate Professor in 2022. In 2016 he was awarded Bhawan fellowship for one year to conduct his post-doctoral research program on novel encapsulation technology at the University of Alabama, USA. In 2020 he worked as Associate Research Scientist at the Department of Aerospace Engineering at The University of Alabama, USA to research vitrimer based composites and filament winded composites. Presently he is working as an Associate professor in the Department of Mechanical Engineering at NIT Silchar.

Dr. Halder’s career spanning nearly 15 years is marked by significant R&D and teaching contributions in the field of materials joining and surfacing, composites, surface functionalization, hybrid FRPs, self healing smart composites, 3R composites, encapsulation technology and energy-efficient building materials having direct applications not only in defense, aerospace and space but also in developing low cost energy efficient building materials. He is well known internationally for his contributions to developing hybrid laminated composites and self-healing smart materials having associative and dissociative bonds.

He has four Indian patents on his credit and published more than 60 research papers in referred journals and an equal number in conference proceedings. He has the distinction of guiding several students toward their master’s and doctoral degrees.

EXPERIENCE 

  • Worked as Specialist Engineer, Process & Technology from 16th March 2009 till 07-01-2013 at TATA consulting Engineers Limited, 3 years 9 months.
  • Assistant Professor, Department of Mechanical Engineer, National Institute of Technology Silchar ​(An Institute of National Importance by MHRD, Govt. of India), Silchar-788010, Assam, India, F-rom 10-12-2012 till 05-06-2022.
  • Associate Professor, Department of Mechanical Engineer, National Institute of Technology Silchar ​(An Institute of National Importance by MHRD, Govt. of India), Silchar-788010, Assam, India, From 06-06-2022 to till date.
  • Post-doctoral research at the University of Alabama, the USA for 12 months.
  • Associate Research Engineer, The University of Alabama from October 2020.

AREA OF INTEREST AND SPECIALIZATION (INCLUDING RESEARCH AREA)

Industry

  • Mini Movable Biodiesel Plant
  • Titanium Pigment Plant
  • Sponge Chrome Pilot Plant
  • Nd-Fe-B Based Permanent Magnets

Academia

  • Composite materials
  • Smart Adhesives and their joining.
  • 2D nanomaterials
  • Hybrid multiscale laminated composites.
  • Bio-composites.
  • Phase change materials and encapsulation technology.
  • Surface engineering and functionalization.
  • Self-healing composite materials, Vitrimers and FRP laminates.
  • Energy-efficient building materials.
  • Thermoformable composites.
  • Condition monitoring of FRPs.
  • Fracture mechanics.

INDUSTRIAL RESEARCH:

  • Consultancy research projects handled.
  1. Development of heterogeneous catalyst for biodiesel production in presence of heterogeneous catalyst. The funding agency was Tata Consulting Engineers Limited. Project Cost Rs 30 Lakhs, Duration two year.
  • Sponsored projects handled.
  1. Feasibility report for a 10,000 TPA sponge chrome pilot plant. Project cost: Rs. 3200000. Funding agency Tata Steel Limited.
  2. Feasibility report for a 100,000 TPA TiO2 slag/Synthetic rutile and 60,000TPA pig iron plant. Project cost: Rs. 1500000. Funding agency SMML, Hyderabad.
  3. Techno-economics feasibility report for a 20,000 TPA plant of pigment grade TiO2 plant (Hyderabad) Project cost: Rs. 500000. Funding agency SSPL, Hyderabad.

 ACADEMIC RESEARCH PROJECTS:

  1. Developing Capabilities in Advanced Manufacturing Technologies (Wide Magnetic Glass Ribbon (MGR)) by CSIR at National Metallurgical Laboratory Jamshedpur (Council of Scientific & Industrial Research) at NML Jamshedpur. (Completed)
  2. Technical Feasibility Report on the utilization of silica from silt ejected out of the power plant on Bhagiratri River”, at IIT Roorkee. (Completed)
  3. Studies on ambient and elevated temperature properties of joints of metals prepared by adhesive joining using nano-particle filled adhesive (Department of Science and Technology) at IIT Roorkee. (Completed)
  4. Synthesis and Fracture Property Evaluation of Polymer Nanocomposites, Funding agency NIT Silchar, Startup research grant, Rs. 1000000.00, Principal Investigator. (Completed) Role PI full share.
  5. Novel Microencapsulation Technology Enabled Energy Efficient Building Materials. IUSSTF & DST 2016, 36000 USD, USA. (Completed). Role PI full share.
  6. Centre for Advanced Manufacturing and Material Testing, DST-FIST 2015, Coordinator, Rs. 22000000.00. Role as PI Half Share.
  7. Bamboo bricks/laminates from BMFs (Bamboo Micron Fibres) for low-cost housing structures for North Eastern Himalayan region, Funded by NMHS, India 2017. Rs. 49.5 Lakhs. Role PI Full Share
  8. Enabling innovative multiple self-healing technology in fiber-reinforced composite with unaltered mechanical properties, SERB-DST (Rs. 35 Lakhs). Role PI Full Share.
  9. “Jal Abhyaranya Campaign for Water Security in IHR” for North Cacher (Dema Hesao), Assam, Funded by NMHS, India 2019, RS. 1362400.00 (Ongoing). Role: PI Full Share.
  10. Spring Rejuvenation for Water Security in Himalaya, IHR, NMHS, Ongoing, (Rs. 499.90911 Lakhs) 2020, NIT Share 40 Lakhs (Ongoing).
  11. Development of smart solar photovoltaic system having encapsulated phase change material with artificial intelligence based real-time condition monitoring, DST-CRG, 2024 (Rs. 48.6 Lakhs) ongoing.
  12. Induction heating via reversible disulfide bond grafted MXene for localized self-healing in thermoformable CFRP laminates, DST-EEQ, 2024 (Rs. 36.7 Lakhs) Ongoing.
  13. Community based Microencapsulated Phase Change Materials (MPCM) Assisted Hybrid Solar Agro-Processing Centers, Funded by NMHS, 2024 (Rs. 49 Lakhs) Ongoing.

CONTRIBUTION IN RESEARCH AND DEVELOPMENT:

  • Supervision of UG Project group-7 Completed.
  • Supervision of Master Engineering/Technology Thesis – 24 Completed.
  • Supervision of Ph.D. Students- 9 Completed, 1 Ongoing.
  • Publication of more than 90 research papers in National and Int. J./Conf.
  • Execution of Major Research Projects in Engineering
  • Consultancy projects completed: 2, Sponsored research project completed 9, Ongoing Sponsored project 4, Total Funding received: USD 679431.00.

SUBJECTS TAUGHT (INCLUDING SUBJECTS CURRENTLY TEACHING)

  • Machine Design UG level
  • Material Science.UG level
  • Theory of Machine.UG level
  • Mechanics of solids.UG level
  • Manufacturing Process-I. UG level
  • Manufacturing Process-II. UG level
  • Engineering Mechanics. UG level
  • Engineering Fracture Mechanics. UG level
  • Instruments and Measurements. UG level
  • Composite materials. PG level
  • Mechanics of composite. PG level
  • Advanced solid mechanics. PG level
  • Structure property correlation of engineering materials. PG level
  • Processing of engineering materials. PG level
  • Fabrication of engineering materials. PG level
  • Nano structured materials-synthesis, properties and applications. PG level
  • Iron making and steel making. PG level

AWARDS & RECOGNITIONS

  •  Best Project Award in Mechanical Division at The jed-i project challenge 2014, at IISC Bangalore.
  • Awarded Second best paper at International Conference on Advances in Materials and Processing-2012.
  • Post-doctoral Fellowship award, Building Energy Efficiency Higher & Advanced Network (BHAVAN) Fellowship Program by IUSSTF and DST, Govt. of India, for post-doctoral research work at the University of Alabama, the USA for 12 months, 2016.
  • Fellowship as Associate Research Scientist at Alabama Transportation Institute, worked at the Department of Aerospace Engineering at The University of Alabama, USA, From September 2020 to September 2021.

ADMINISTRATIVE RESPONSIBILITY

  • In charge of Nanocomposite materials lab, FRP and Material Characterization Lab.
  • Coordinator Trainee teacher, NIT Silchar 2014-2015.
  • Workshop In charge, NIT Silchar, 2014-2015.
  • Coordinator, QIP, NIT Silchar, 2015-2016.
  • Member DPC, Dept of ME, NIT Silchar, 2023 till date.

INVITED TALK/GUEST LECTURE:

  • Invited Talk on topic “Epoxy Nanocomposite” at Rotary Club, Jamshedpur Chapter, 2012.
  • Invited lecture on workshop on Advances in manufacturing technology, India.
  • Invited lecture on workshop on Physics of Materials, NIT Silchar, India.
  • Invited talk in a TEQIP-III sponsored one week online short term course on “Research and Development in Composite Materials (RDCM-2020)” jointly organized by the department of Mechanical Engineering and department of Physics, J.C. Bose University of Science and Technology, YMCA, Faridabad from July 27-31, 2020.
  • Invited speaker in the live webinar entitled “Bio – Composite Materials” organised by Assam Science and Technology University, Guwahati and Jorhat Engineering College, Jorhat, in association with School of Engineering and Technology, Kaziranga University, Jorhat, Assam, India under TEQIP III on 29th June, 2020.
  • Invited speaker in Emerging trends in Material Science & Engineering for its Applications in Manufacturing Sector (24 th – 30 th January 2023) Organized By: Dept. of Mechanical Engineering, NIT Silchar, Assam – 788010

INSTRUMENTS HANDLED:

  • X-Ray Diffractometer.
  • Vacuum arc furnace.
  • Melt Spinner.
  • Curie temperature measuring instrument.
  • Lake Shore Hard magnetic Hysteresis measurement.
  • Transmission electron microscope (TEM).
  • Field Emission-Scanning Electron Microscope (FE-SEM).
  • Atomic Force Microscope (AFM).
  • Differential Scanning Calorimeter (DSC).
  • Thermo Gravimetric Analyzer (TGA).
  • Fourier Transform Infrared Spectroscopy (FTIR).
  • Optical Microscopy.
  • Ultrasonic Processing.
  • High-Performance Liquid Chromatography (HPLC).
  • Auto Clave.
  • Universal tensile testing machine.

WORKSHOP ORGANIZED

Sl Details Sponsoring Organization Period
1. Curriculum development program on “Materials & Manufacturing Technology” TEQIP-II JULY 9-12, 2013
2. One week short term course on JOINING OF MATERIALS TEQIP-II AUGUST 09-13, 2013
3. One week short term course on FAILURE ANALYSIS OF ENGINEERING MATERIALS TEQIP-II SEPTEMBER 23-27, 2013
4 One Week Lecture series on Processing of Nonferrous Materials and Nanostructured Materials TEQIP-II Feb 03-07, 2014

PHD SCHOLARS GUIDED

Sl. No. Name Thesis Title Year of Award Name of Supervisor
1. Snigdha Bhattacharjee Resistive switching and memory performance of semiconductor nanoparticles embedded polymer films. 2017 Prof. A Roy & Dr. Sudipta Halder
2. Subhankar Das Silanized carbon fillers and its damage mitigation capabilities for potential reinforcement in hybrid laminates 2019 Dr. Sudipta Halder
3. Asangnam Satyavrata Singh Synthesis and Characterization of Hybrid FRP Biocomposites Using Bamboo Fillers 2019 Dr. Sudipta Halder
4. Nazrul Islam Khan Thermo-reversible healing of graphitic nanofiller hybridized CFRP laminated composites 2019 Dr. Sudipta Halder
5. K Gopal Krishna Singh Synthesis of Novel PCM microcapsules and their characterization for efficient thermal management of electronic devices. 2019 Dr. Sudipta Halder
6. P L Choudhury Enhancing Delamination Resistance of GFRP Laminates Using Graphene Nanofiller 2020 Dr. Sudipta Halder
7. Tankeshwar Prasad Assessing latent initiator based multiple healing in epoxy matrix GFRP laminated composites 2020 Dr. Sudipta Halder & Dr. S S Dhar
8. Deepak Kumar Bamboo bricks/laminates from BMFs (Bamboo Micron Fibres) for low-cost housing structures Ongoing Dr. Sudipta Halder
9. Lakshmi Nandan Borah Enabling innovative multiple self-healing technology in fiber-reinforced composite with unaltered mechanical properties Submitted Dr. Sudipta Halder
10. Swatantra Kumar High-performance hybrid FRP composite structures prepared using filament winding process Ongoing Dr. Sudipta Halder

M.TECH. SCHOLARS GUIDED

Sl. No. Name of Scholar Title of the Project Year of Graduation Name of Supervisor
1. Anurag Khare Multiscale Modeling of Ilmenite Reduction Process 2014 Dr. Sudipta Halder
2. Tankeshwar Prasad Thermophysical Behavior of Epoxy Resin Reinforced with ZnO Nanoparticle of Different Morphology and Size Prepared via. in Situ Synthesis Method 2014 Dr. Sudipta Halder
3. Soyeb Ahemad Impact of Silanized ZrO2 nanoparticles on Mechanical Performance of Laminated GFRP Multi-Scale Composites 2015 Dr. Sudipta Halder
4. Nazrul Islam Khan Influence of Self-Healing Microcapsule on Healing Performance of Metal-Epoxy Composite Adhesive 2015 Dr. Sudipta Halder
5. Animesh Sinha Influence of Reactive and Non-Reactive Diluents on the Mechanical Properties of Epoxy Resin 2015 Dr. Sudipta Halder
6. Polimeni Ravi Kumar Effect of Graphene Nanoplatelets Infusion on Dynamic Thermal Behavior of GFRP Multi-Scale Composites 2015 Mr. Pannalal Choudhury  &Dr. Sudipta Halder
7. Dhritiman Talukdar Atomistic Modelling and Molecular Dynamics Simulation of DGEBA-DETA/C60 Nanocomposites 2015 Dr. Sudipta Halder
8. Anil Varghese Mangalan Graphene Nano Platelets: An Attractive Ingredients for Laminated GFRP Multi-Scale Composites 2015 Mr. Pannalal Choudhury  &Dr. Sudipta Halder
9. Sriram Chauhan Tuning Morphology of Sol-gel Synthesized ZnO on Mechanical and Thermal Properties of Epoxy Nanocomposites 2015 Mr. D.H. Das &Dr. Sudipta Halder
10. Nabajyoti Talukdar Mechanical and Viscoelastic Properties of Covalently and Non-Covalently Functionalized Graphene Nano Platelet Infused Epoxy Nano-composite 2016 Dr. Sudipta Halder
11. Subhankar Saha  Investigating Supremacy of Silanized ZrO2 on Mechanical and Fracture Properties of Epoxy Nanocomposites and Fracture Energy of Hybrid GFRP Laminates 2016 Dr. Sudipta Halder
12. Alakesh Sarmah Investigating effect of surface treatment on interfacial fracture of TiO2-epoxy adhesive Stainless Steel joints 2016 Dr. Sudipta Halder
13. Hrishikesh Dutta Tensile and fracture properties exploration of epoxy composite reinforced with carbon nano particle decorated bamboo short fibers 2016 Dr. Sudipta Halder
14. Shashi Bhushan Gunjan Introducing multiple healing ability using stimuli responsive healing approach 2017 Dr. Sudipta Halder & Mr. Pannalal Choudhury
15. Siddhartha Sagar Bora Electrophoretic deposition of CNP/GNP glass fiber to produce hybrid laminated composite to improve interfacial delamination strength 2017 Dr. Sudipta Halder & Mr. Pannalal Choudhury
16. Biswa Baran Behera Introducing transformation behaviour during failure in hybrid GFRP laminates 2017 Dr. Sudipta Halder& Dr. R. D. Mishra
17. Dhruba Jyoti Sarma Incorporation of surface modified waste glass nanoparticle in GFRP to enhance the multifunctional property 2017 Dr. Sudipta Halder& Dr. K.M. Pandey
18. Lakshmi Nandan Borah Investigation on cenosphere encapsulated phase change material coated with calcium silicate hydrate gel 2019 Dr. Sudipta Halder
19. Avinash Kumar Surface functionalized TiO2 nanoparticle reinforced hybrid FRP laminated composites 2019 Dr. Sudipta Halder
20. Bikash Lahon Development of low temperature Self-healing agent for carbon fiber reinforce laminated composite 2020 Dr. Sudipta Halder
21. Yogendra Kumar Verma Investigation of functionalized bamboo-based Nano Cellulose as a filler in hybrid FRP Laminated Composite 2020 Dr. Sudipta Halder
22. Sandeep Kumar Singh Surface functionalized TiO2  Reinforced Hybrid FRP Laminated Composite 2020 Dr. Sudipta Halder
23. Chandrangith KP Vitrimer powder to manufacture thermoformable fiber reinforced polymer composites. 2022 Dr. Sudipta Halder
24. Anubhav Saikia Reversible  disulfide  bond  grafted  nanofiller  reinforced  epoxy  forthermoformable and self-healable laminated composites 2023 Dr. Sudipta Halder

UNDERGRADUATE LEVEL PROJECT GUIDED

Sl. No. Name of Scholar Scholar No. Title of the Project Year of Graduation Name of Supervisor
1. Abhishek KarAshish ChandaKushal KachariVishal KempariPurnajyoti Dey 09-1-2-09609-1-2-00309-1-2-09209-1-2-09109-1-2-100 Modeling of Ultrasonic Dispersion Process for Preparation of Epoxy Nanocomposites 2013 Dr. Sudipta Halder
2. Ikbal Bahar ChoudhuryAbhinav MathurWrituparna NathAniruddha PhukanAkhil Anurag 10-1-2-01610-1-2-00510-1-2-09810-1-2-09010-1-2-056 Preparation and Characterization of Self-Healing Capsules 2014 Dr. Sudipta Halder
3. Rupam BoraAbhishek DasVijendra KumarHirakjyoti BasumataryKumar Satyam 11-1-2-05811-1-2-06011-1-2-06911-1-2-08511-1-2-088 Design and Fabrication of Ultrasonic Chamber 2015 Dr. Sudipta Halder
4. Ankit SatiAnirban ChakrabortyPartha Ptaatim SaikiaAnkush NandiSaurav Das 12-1-2-02312-1-2-03612-1-2-05112-1-2-06112-1-2-069 A Method to Decorate Carbon Fiber Surface with Oxidised Carbon Nanoparticles Using Ultrasonically Assisted Direct Current Electrophoretic Deposition 2016 Dr. Sudipta Halder
5. Omprakash KumarPogiri Venkata Sai SasidharAman Patel 15-1-2-06215-1-2-06315-1-2-100 Synthesis of hydroxyapatite oncarbon particles (graphitenanoparticles & charcoal) 2019 Dr. Sudipta Halder
6. Udipta Kumar Borah, Manash Jyoti Bora, Zahir AhmedTapadar, Raktim Jyoti Bharadwaj 1916046191604119160491916026 Vitrimization of Tannic acid based pulverized CFRP via mechanochemical process to prepare epairable CFRP. 2023 Dr. Sudipta Halder

PATENT(S)

  1. Sudipta Halder, P.K. Ghosh, A multifunctional technique for dispersion of thoroughly broken agglomerates of inorganic nanoparticles in viscous fluid, Application No. 1554/Del/2008, Grant No. 292158, 31/08/2016.
  2. Sudipta Halder, Ankush Nandi, Anirban Chakraborty, Subhankar Das, Partha Pratim Saikia, Ankit Sati, Decoration of CF with O-CNPs using Ultrasonically-assisted DC-EPD, Indian Patent Application No. 201631026538. Grant No. 341816, 24/07/2020.
  3. Sudipta Halder, Ikbal Choudhury, Abhinav Mathur, Writuparna Nath, A system and method of synthesizing PMMA-Shell Based Self-Healing Microcapsules, Application No. 1127/KOL/2014 of 03.11.2014, Grant No. 356688, Dated 26/01/2021.
  4. Ashangbam Satyavrata Singh, Sudipta Halder, A System and Method for Synthesizing Bamboo Short Micron Fibers, Application No. 719/KOL/2015 dated 02-07-2015, Grant No. 393676, Dated 30-03-2022.
  5. A System and Method For Multi Shell Wall Microcapsules, Sudipta Halder, KHG Krishna, 2019, IN Patent App. 201931023343. Application Date: 12/06/2019.
  6. Sudipta Halder, Nazrul Islam Khan, A method of grafting of graphitic nanoplatelets with bismaleimide and furfurylamine for Diels-Alder based self-healing of CFRP laminated composites, 2019, IN Patent App. No. 08/11/2019

EDITORSHIP

BOOKS/ BOOK CHAPTERS

Sl. No. Title Publisher details Edition Publication details (Year, Month, ISBN Nos., etc.)
1. Advances in Materials and Processing Tran Tech Publication Switzerland B.S.S. Daniel and G.P. Chaudhari Sudipta Halder et al., 2012, Advanced Materials Research, 585, 149November, 2012, 10.4028/www.scientific.net/AMR.585.149
Toughened Composites, 217-229, Role of Nanoreinforcement onto Intra-and Interlaminar Fracture of Hybrid Laminated Composites, CRC PRESS Sri Bandyopadhyay, Raghavendra Gujjala S Das, P Das, S Halder, P Choudhury
2 Chapter 15 – Self-healing fiber-reinforced polymer composites for their potential structural applications Elsevier Inc. Sabu Thomas Nazrul IslamKhan, Sudipta Halder

INTERNATIONAL JOURNALS

Year 2012

  1. Sudipta Halder*,K. Ghosh and M.S. Goyat, Influence of ultrasonic dual mode mixing on morphology and mechanical properties of ZrO2-epoxy nanocomposite, High performance polymer, 24 (4), p.331-341, Jun 2012. Impact factor: 1.584
  2. Sudipta Halder*, A K Pandya, A Mitra, A Basu Mallic, Crystallization behavior and Curie temperature Properties of Al doped Nd-Fe-B based Nanocomposite Permanent Magnet, Advanced Materials Research, 585, pp 149-153 2012.
  3. K. Ghosh, Abhishek Pathak, M.S. Goyat*, and Sudipta Halder, Influence of nanoparticle weight fraction on morphology and thermal properties of epoxy/TiO2nanocomposite, Journal reinforced plastics and composites, 31 (17) p. 1180-1188, 2012. Impact factor: 1.786.

Year 2013

  1. S Sakthivel*, Sudipta Halder, PD Gupta, Influence of co-solvent on production of biodiesel in batch and continuous process, International Journal of Green Energy, 10 (8) p. 876-884, 2013. Impact factor: 1.302.
  2. Sakthivel*, Sudipta Halder, P. D. Gupta, Optimization of process variables for production of biodiesel in packed bed reactor using response surface methodology, International Journal of ambient energy, 34 (2) p. 83-91, 2013.
  3. Sudipta Halder*,K. Ghosh, M.S. Goyat and S. Ray “Ultrasonic Dual Mode Mixing and its Effect on Tensile Properties of SiO2-Epoxy Nanocomposite”, Journal of Adhesion Science and Technology, 27, p 111-124, 2013. Impact factor: 1.210.
  4. K. Ghosh, Sudipta Halder*, M.S. Goyat, and Karthik G, Study on Thermal and Lap Shear Characteristics of Epoxy Adhesive Loaded with Metallic and Non-Metallic Particles, The Journal of Adhesion, 89 (1), p. 55-75, 2013. Impact factor: 2.366.
  5. Subhankar Das*, Pannalal Chowdhury, Sudipta Halder, Stress and Free Edge Delamination Analyses of Delaminated Composite Structure using ANSYS, Journal of Procedia Engineering 64 (2013 ) 1364 – 1373.

Year 2014

  1. Sudipta Halder*, S. Sakthivel, P. D. Gupta, Studies of transesterification of karanja (Pongamia pinnata) oil in a packed bed reactor, Chemical engineering communications, 201 (1), 88-101, 2014. Impact factor: 1.431.
  2. Ikbal Choudhury*, Abhinav Mathur, Sudipta Halder, Determination of Elastic Behaviour of Self-Healing Composites, International Journal of Latest Technology in Engineering, Management & Applied Science, 2014, 3 (1), pp 20-24.

Year 2015

  1. Tankeshwar Prasad, Sudipta Halder*, Optimization of Parameters and its Effect on Size of ZnO Nanoparticles Synthesized by Sol-gel Method, Advances in Intelligent Systems and Computing, 336, p. 399-407, 2015.
  2. Ikbal Choudhury, Sudipta Halder*, Abhinav Mathur, Writuparna Nath, Aniruddha Phukan “Synthesis of self-healing thermosetting resin based capsules and their related complexities”, Advanced Materials Research, 1119, p. 428-432, 2015.
  3. Sudipta Halder*, M.S. Goyat and P.K. Ghosh, Morphological, structural, and thermophysical properties of zirconium dioxide–epoxy nanocomposites, High Performance Polymer, 2015, doi: 10.1177/0954008315595275. Impact factor: 1.584
  4. Sudipta Halder*, M.S. Goyat and P.K. Ghosh, Influence of ultrasonic dual mode mixing on the morphology, molecular structure and thermo-physical properties of a SiO2-epoxy nanocomposite adhesive, Journal of adhesion science and technology, 29, p 2590-5604, 2015. Impact factor: 1.210.
  5. Manjeet Singh Goyat*, Sumit S.; Sumit Bahl; Sudipta  Halder; Prakriti  Ghosh, Thermomechanical response and toughening mechanisms of a carbon nano bead reinforced epoxy composite, Materials chemistry and physics, 166, p 144-152, 2015. Impact factor: 2.781.
  6. Pannalal Choudhury*, Subhankar Das, Sudipta Halder, Krishna Murary Pandey, Free edge mixed mode delamination analysis of laminated composites with wrap-around configuration-A Finite Element Study, Institute of Engineers Series-D, DOI 10.1007/s40033-015-0099-z, 2015.

Year 2016

  1. Sudipta Halder*, Soyeb Ahemad, Subhankar Das, Jialai Wang, Epoxy/Glass Fiber Laminated Composites Integrated with Amino Functionalized ZrO2 for Advanced Structural Applications, ACS Applied Materials & Interfaces, 8 (3), pp 1695–1706, 2016. Impact factor: 8.456
  2. Tankeshwar Prasad, Sudipta Halder*, S S Dhar, Morphological dissimilarities of ZnO nanoparticles and its effect on thermo‐physical behavior of epoxy composites, Polymer Composites, DOI: 10.1002/pc.23914, 2016. Impact factor: 2.268.
  3. Nazrul Islam Khan, Sudipta Halder*, M.S. Goyat, Effect of epoxy resin and hardener containing microcapsules on healing efficiency of epoxy adhesive based metal joints, Materials chemistry and physics, 171, p 267-275, 2016. Impact factor: 2.781
  4. Ikbal Choudhury, Sudipta Halder*, Nazrul Islam Khan, Abhinav Mathur, Writuparna Nath, Effect of TETA Microcapsules on Self-Healing Ability of Dual Component Epoxy System, Applied Materials letters, 7, 10, p 836-843, 2016. Impact factor: 1.9.
  5. Subhankar Das, Sudipta Halder*, Kaushal Kumar, A comprehensive study on step-wise surface modification of C60: Effect of oxidation and silanization on dynamic mechanical and thermal stability of epoxy nanocomposite, Material Chemistry and Physics, 179, p 120–128 2016. Impact factor: 2.781.
  6. B Paul, S Dhar, DD Purkayastha, S Das, Sudipta Halder, Facile one-pot strategy to prepare Ag/Fe2O3 decorated reduced graphene oxide nanocomposite and its catalytic application in chemoselective undsreduction of nitroarenes, Journal of Alloys and Compound, 681, p 316–323, 2016, Impact factor: 4.175.

Year 2017

  1. Nazrul Islam Khan, Sudipta Halder*, M.S. Goyat, Influence of dual-component microcapsules on self-healing efficiency and performance of metal-epoxy composite-lap joints, Journal of Adhesion, p-949-963, Volume 93, 2017 – Issue 12, Impact factor: 2.366.
  2. Sudipta Halder*, Tankeshwar Prasad, Nazrul Khan, Manjeet Goyat, R Chauhan, Superior Mechanical Properties of Poly Vinyl Alcohol-Assisted ZnO Nanoparticle Reinforced Epoxy Composites, Material Chemistry and Physics, 192, 1 p 198–209, 2017. Impact factor: 2.781.
  3. Pannalal Choudhury, Sudipta Halder*, Nazrul Islam Khan, Jialai Wang, Krishna Murari Pandey, Enhanced crack suppression ability of hybrid glass fiber reinforced laminated composites fabricated using GNP/epoxy system by optimized UDM parameters, Ultrasonic Sonochemistry, 39, p 174–187, 2017. Impact factor: 7.279.
  4. Jaideep Adhikari , Bhabatosh Biswas, Sumit Chabri, Nil Ratan Bandyopadhyay, Sudipta Halder, Bhairab Chandra Mitra, Arijit Sinha, Mechanical properties of metal oxide dispersed jute fiber reinforced polyester biocomposites, Polymer composites, 2017 (Accepted). Impact factor: 2.268.
  5. Ashangbam Satyavrata Singh, Sudipta Halder*, Jialai Wang, Jagadish, Extraction of bamboo micron fibres by optimized mechano-chemical process using a central composite design and their surface modification, Materials Chemistry and Physics. Volume 199, 15 September 2017, Pages 23-33, Impact factor: 2.781.
  6. Subhankar Das, Sudipta Halder*, Jialai Wang, MS Goyat, A Anil Kumar, Yi Fang, Amending the thermo-mechanical response and mechanical properties of epoxy composites with silanized chopped carbon fibers, Composites Part A: Applied Science and Manufacturing, Volume 102, November 2017, Pages 347-356, Impact factor: 6.282.

Year 2018

  1. Animesh Sinha, Nazrul Islam Khan, Subhankar Das, Jiawei Zhang, Sudipta Halder, Effect of reactive and non-reactive diluents on thermal and mechanical properties of epoxy resin, High performance polymer. 30(10) 1159–1168, 2018, Impact factor: 2.1.
  2. S.Goyat, S.Rana, Sudipta Halder, P.K.Ghosh, Facile Fabrication of Epoxy-TiO 2 Nanocomposites: A Critical Analysis of TiO2 Impact on Mechanical Properties and Toughening Mechanisms, Ultrasonic Sonochemistry, Impact factor: 8.4.
  3. org/10.1016/j.ultsonch.2017.07.040, 2018. Impact factor: 7.279.
  4. Gopal Krishna Singh, Sudipta Halder*, Sukumar Pati, Jialai Wang, Microencapsulation of Paraffin Wax Microspheres with Silver, Defense Science Journal, 62(2), 218-224, 2018, Impact factor: 0.5.
  5. Nazrul Islam Khan, Sudipta Halder, Subhankar Das, M.S. Goyat, Parametric influence towards size reduction of poly(methylmethacrylate) shelled microcapsule with epoxy core, Materials Today Proceeding, 5(1), Part 2, 2295-2299, 2018.
  6. Subhankar Das, Sudipta Halder, Arijit Sinha, Muhammad Ali Imam, and Nazrul Islam Khan, Assessing Nanoscratch Behavior of Epoxy Nanocomposite Toughened with Silanized Fullerene, ACS Applied Nano Materials, 2018 1 (7), 3653-3662, Impact factor: 5.9.
  7. Jiawei Zhang, Fangyu Luo, Tingbin Liu, Jianchang Zhao, Sudipta Halder, Galerkin Analysis of Effect of Dead Load on Natural Frequencies of Box Beam, J. Inst. Eng. India Ser. C (2018). https://doi.org/10.1007/s40032-018-0494-y.
  8. S Das, NI Khan, S Halder, Thermo-mechanical stability of epoxy composites induced with surface silanized recycled carbon fibers, IOP Conference Series: Materials Science and Engineering 377 (1), 012172.
  9. NI Khan, S Halder, SB Gunjan, T Prasad, A review on Diels-Alder based self-healing polymer composites, IOP Conference Series: Materials Science and Engineering 377 (1), 012007.

Year 2019

  1. Gopal Krishna Singh Khagokpam, Sudipta Halder, Paraffin wax microsphere embedded epoxy composites for potential thermal management in electronic devices, High Performance Polymers, Vol. 31(7) 767–777, 2019, Impact factor: 2.1.
  2. Nazrul I Khan, Sudipta Halder, Subhankar Das, Jialai Wang, Exfoliation level of aggregated graphitic nanoplatelets by oxidation followed by silanization on controlling mechanical and nanomechanical performance of hybrid CFRP composites, Composite Part B: Engineering, Volume 173, 15 September 2019, 106855. Impact factor: 13.1
  3. Tankeshwar Prasad, Sudipta Halder, Siddhartha S.Dhar, Imidazole-supported silica one-pot processed nanoparticles to enhance toughness of epoxy based nanocomposites, Materials Chemistry and Physics, Volume 231, 1 June 2019, Pages 75-86. Impact factor: 4.6
  4. Nazrul Islam Khan, Sudipta Halder, Jialai Wang, Diels-Alder based epoxy matrix and interfacial healing of bismaleimide grafted GNP infused hybrid nanocomposites, Polymer Testing, Volume 74, 2019, Pages 138-151. Impact factor: 5.1.
  5. AS Singha, Sudipta Halder, J Wang, MA Imamd, P Chene, Tannic Acid Intermediated Surface Functionalization of Bamboo Micron Fibers to Enhance Mechanical Performance of Hybrid GFRP, Composites Part B: Engineering, 2019, DOI: https://doi.org/10.1016/j.compositesb.2019.107322. Impact factor: 13.1.
  6. AS Singha, Sudipta Halder, Tannic Acid Functionalization of Bamboo Micron Fibes: Its  Capability to Toughen Epoxy Based Biocomposites, Materials Chemistry and Physics, https://doi.org/10.1016/j.matchemphys.2019.122112, 2019. Impact factor: 4.6.
  7. Subhanka Das, Sudipta Halder, Nazrul Islam Khan, Surface Silanization of Recycled Chopped Carbon Fiber, International Journal of Engineering, Applied and Management Sciences Paradigms, 54(1) 2019.
  8. Pannalal Choudhury, Subhankar Das, Sudipta Halder, Mechanical Characterization of Graphene Infused Hybrid GFRP Laminates, International Journal of Engineering, Applied and Management Sciences Paradigms, 54(1) 2019.
  9. A Nandi, S Das, S Halder, A Chakrabortya, MA Imam, Ultrasonically Assisted Electrophoretic Deposition of Oxidized Graphite Nanoparticle onto Carbon Fiber, Amending Interfacial Property of CFRP, Journal of Composite Materials, 2019, 54(13), 1615-1625, https://doi.org/10.1177/0021998319884109 .Impact factor: 2.9.

Year 2020

  1. S Das, S Halder, NI Khan, B Paul, MS Goyat, Assessing Damage Mitigation by Silanized Milled Graphite Nanoparticles in Hybrid GFRP Laminated Composites, Composites Part A: Applied Science and Manufacturing, 2020, Volume 132, 105784. Impact factor: 8.7.
  2. Zhou Shengquan - Zhang Yongfei - Zhou Dawei - Wang Weijian - Ke Zhaibang – Sudipta Halder, Fly Ash Foundation Reinforced By Cement–Soil Mixing Piles, DYNA, 95, 198-204, 2020. Impact factor: 2.07.

Year 2021

  1. T Prasad, S Halder, SS Dhar, MS Goyat, Epoxy/imidazole functionalized silica epoxy nanocomposites: mechanical and fracture behaviour, Express Polymer Letters, 15(3) 2021, 203-233. Impact factor: 3.952.
  2. Khan, S Halder, N Talukdar, S Das, MS Goyat, Surface oxidized/silanized graphite nanoplatelets for reinforcing an epoxy matrix, Materials Chemistry and Physics, 258, 123851, 2021. Impact factor: 4.6.
  3. NI Khan, S Halder, S Das, MS Goyat, Graphitic nanoparticles functionalized with epoxy moiety for enhancing the mechanical performance of hybrid carbon fiber reinforced polymer laminated composites, Polymer Composites, 42 (2), 678-692, 2021. Impact factor: 3.531.
  4. MS Goyat, A Hooda, TK Gupta, K Kumar, S Halder, PK Ghosh, BS Dehiya, Role of non-functionalized oxide nanoparticles on mechanical properties and toughening mechanisms of epoxy nanocomposites, Ceramics International, 47 (16), 22316-22344, 2021. Impact factor: 5.2.

Year 2022

  1. Manik Chandra Biswas, Bodiuzzaman Jony, Pranab Kumar Nandy, Reaz Ahmed Chowdhury, Sudipta Halder, Deepak Kumar, Seeram Ramakrishna, Masud Hassan, Md Ariful Ahsan, Md Enamul Hoque, Muhammad Ali Imam, Recent Advancement of Biopolymers and Their Potential Biomedical Applications, Journal of Polymers and the Environment, 30, 54-74, 2022. Impact factor: 5.3.
  2. S Das, S Halder, B Paul, NI Khan, MS .Goyat, Impact of silanized milled graphite nanoparticles on thermo-mechanical properties of epoxy nanocomposite, Materials Chemistry and Physics, 278, 125601, 2022. Impact factor: 4.6.
  3. P Choudhury, S Hader, S Das, Use of Ultrasonic Dual Mode Mixing for Graphene Infusion to make Hybrid GFRPs: Study on Mechanical Performance, Journal of Composite Materials, https://doi.org/10.1177/00219983221073980, 56, 1321–1333, Impact factor: 2.9.
  4. D Talukdar, S Halder, S Das, Ms Goyat, AK Mishra, A molecular dynamics simulation study to investigate the effect of C60 on thermo-mechanical and elastic properties of DGEBA/DETA nanocomposites, Journal of Metals, Materials and Minerals, 32, 3, 2022.
  5. S Halder, J Wang, Y Fang, X Qianb, M Ali Imam, Cenosphere-based PCM microcapsules with bio-inspired coating for thermal energy storage in cementitious materials, Materials Chemistry and Physics, Volume 278, 15 February 2022, 125601. Impact factor: 4.6.

Year 2023

  1. NI Khan, S Halder, MS Goyat, LN Borah, S Das, Repetitive self-healing of Diels–Alder grafted graphene nanoplatelet reinforced carbon fiber reinforced polymer composites with outstanding mechanical properties, Soft Matter, 19 (17), 3121-3135, 2023. Impact factor: 4.046.
  2. LN Borah, S Halder, P Choudhury, Epoxy composites integrated with functionalized wet-milled graphitic nanoparticles: Featuring enhanced mechanical performance and in-plane fracture resistance, Polymer Composites, 44(11) 7985-7996, 2023. Impact factor: 3.531.
  3. H Dutta, P Gurusamy, S Halder, Enhancement of thermal and mechanical properties of polymer composite using a novel milled bamboo filler, Polymer Composites, https://doi.org/10.1002/pc.27733, Accepted, 2023. Impact factor: 3.531.
  4. SK Singh, B Nayak, TJ Singh, S Halder, Investigating the role of synthesized reduced graphene oxide and graphite micro-fillers on mechanical and fretting wear performance of glass fiber epoxy-based composite, High Performance Polymers, 35(9), 946-962, 2023. Impact factor: 2.1.

Year 2024

  1. LN Borah, S Das, P Choudhury, S Halder, Milled graphitic nanoparticle toughened epoxy composites via increased resistance to in-plane crack propagation, Materials Chemistry and Physics, 128894, 2024.
  2. NI Khan, S Halder, BR Gautam, Self-healing of epoxy nanocomposites using Diels-Alder adduct grafted graphitic nanoplatelets Results in Surfaces and Interfaces, 100187, 2024

 INTERNATIONAL CONFERENCES

  1. Sudipta Halder, M.S. Goyat, and P.K. Ghosh, Micro-structural study of tensile mirror zone and its effect on mechanical properties of SiO2/epoxy nanocomposite, National conference on Micrstructure-2011, IIT Roorkee.
  2. Sakthivel, Sudipta Halder, P. D. Gupta and N.K.Agnihotra, Bio-fuel from Used Vegetable (cooking) Oil in Middle East, Qatar Foundation Annual Research Forum, 2011, Qatar.
  3. Sudipta Halder, M.S. Goyat, and P.K. Ghosh, Study on mechanical and fracture characteristics of silica-nanoparticle reinforced epoxy adhesive, National Conference on “Global challenges- Role of Science and Technology in Giving Their Solutions TIT&S bhiwani 2012, Bhiwani.
  4. Sudipta Halder, A K Pandya, A Mitra, A Basu Mallic, Crystallization behavior and Curie temperature Properties of Al doped Nd-Fe-B based Nanocomposite Permanent Magnet, International Conference on Advances in Materials and Processing-2012, IIT Roorkee.
  5. Sudipta Halder, A K Pandya, A Mitra, Crystallization behavior and Curie temperature of Co doped Nd-Fe-B based Nanocomposite Permanent Magnet, National Metallurgical’s Day, International Symposium on Converting Challenges into Opportunities: Iron and Steel-2012, jamshedpur.
  6. Sudipta Halder, P K Ghosh and M S Goyat, Lap shear behavior of ZrO2 nanoparticle reinforced epoxy adhesive cured at different temperatures, International Conference on Recent Advances in Composite Materials (ICRACM-2013), Goa.
  7. Sudipta Halder, R K Gupta, Tankeshwar Prasad, Effect of process zone on tensile behavior of DGBA/SiO2 nanocomposites, 5th National Symposium for Materials Research Scholars, MR-13, 2013, IIT Bombay.
  8. Subhankar Das, Pannalal Chowdhury, Sudipta Halder, Stress and Free Edge Delamination Analyses of Delaminated Composite Structure using ANSYS, International Conference On DESIGN AND MANUFACTURING, IConDM, 2013, Chennai.
  9. Sudipta Halder, P.K. Ghosh, Mechanism of nanoparticle dispersion via acoustic cavitation in highly viscous fluid, iNaCoMM 2013, IIT Roorkee.
  10. Choudhury, I., Mathur, A. and Halder, S., “Determination of elastic behavior of self-healing composites using mathematical models”, Proceedings of the International Conference on Research and Scientific Innovation (RSIS), Ahmedabad, India, 22nd Dec 2013.
  11. Tankeshwar Prasad, Sudipta Halder, Optimization of Parameters and its Effect on Size of ZnO Nanoparticles Synthesized by Sol-gel Method, SocproS-2014, NIT Silchar.
  12. Choudhury, I., Mathur, A., Phukan, A., Nath, W., and Halder, S., “Preparation and Characterization of self-healing polymer matrix”, MACRO 2015, International Symposium on Polymer Science and Technology, Kolkata, India, Jan 23-26, 2015.
  13. Ikbal Choudhury, Sudipta Halder, Abhinav Mathur, Writuparna Nath, Aniruddha Phukan “Synthesis of self-healing thermosetting resin based capsules and their related complexities”, MIMT 2015: 6th International Conference on Mechanical, Industrial, and Manufacturing Technologies, March 6-7, 2015, Melaka, Malaysia.
  14. Nazrul Islam Khana, Sudipta Halder, M.S. Goyat, Effect of emulsifier on the properties of capsules for fabricating healing enabled next generation adhesive joints, 30th International Conference on Surface Modification Technologies (SMT30), 29th June – 1st July, 2016, Milan, Italy.
  15. Subhankar Das, Sudipta Halder, Effect of oxidation and silanization of C60 on the tensile and dynamic mechanical behavior of epoxy nanocomposites, The 4th International Conference on Advances in Materials and Materials Processing (ICAMMP-IV) during 5th to 7th November 2016.
  16. Nazrul Islam Khan, Sudipta Halder, Subhankar Das, M.S. Goyat, Parametric influence towards size reduction of poly(methylmethacrylate) shelled microcapsule with epoxy core, Materials Today Proceeding (ICMS 2017).
  17. Jialai Wang, Sudipta Halder, Fang, Guangping Lin, Novel Encapsulation Technology for Energy Efficient Building Materials and Self-Healing of Concrete, JEC-Chicago, USA, 2017.
  18. Subhankar Das, Sudipta Halder. Effect of oxidation and silanization of C60 on the tensile and dynamic mechanical behavior of epoxy nanocomposites. The 4th International Conference on Advances in Materials & Materials Processing (icAMMP-IV) on November 5-7, 2016 at IIT Kharagpur, India.
  19. Subhankar Das, Sudipta Halder, and Nazrul Islam Khan. Influence of acoustic cavitation mixing on tensile and fracture properties of oxidized fullerene-epoxy nanocomposites. International Conference on Nanotechnology: Ideas, Innovations & Initiatives-2017 (ICN: 3i-2017) on 6–8 December 2017 at IIT Roorkee, India.
  20. Subhankar Das, Nazrul Islam Khan, Sudipta Halder. Thermo-mechanical stability of epoxy composites induced with surface silanized recycled carbon fibers. 1st International Conference on Mechanical Materials and Renewable Energy (ICMMRE 2017) on 8th – 10th December 2017 at Sikkim Manipal Institute of Technology, Majhitar, Sikkim, India.
  21. N I Khan, S Halder, S B Gunjan1and T Prasad, A review on Diels-Alder based self-healing polymer composites, IOP Conference Series: Materials Science and Engineering, Volume 377 (2018),
  22. Subhanka Das, Sudipta Halder, Nazrul Islam Khan, Surface Silanization of Recycled Chopped Carbon Fiber, International Journal of Engineering, ICRMR2019 at Goa University, January, 2019.
  23. Pannalal Choudhury, Subhankar Das, Sudipta Halder, Mechanical Characterization of Graphene Infused Hybrid GFRP Laminates, International Journal of Engineering, ICRMR2019 at Goa University, January 2019.
  24. Halder, Sudipta and Das, Subhankar; Milled Graphite Nanoparticles, Silanization, Epoxy Composites, Mechanical, Fracture, 35th ASC Technical meeting, 2020.
  25. Pannalal Choudhury; Subhankar Das; Sudipta Halder; Graphene nano platelets, Glass fiber laminates, micro mechanical modeling, 35th ASC Technical meeting, 2020.
  26. Lakshi Nandan Borah, Kh. Gopal Krishna Singh, Sudipta Halder, Pannalal Choudhury, Encapsulated cenospheres having phase change material coated with poly-dopamine, International Conference on Recent Developments in Mechanical Engineering ICRAME 2020 07-09 February 2020, NIT Silchar, India.
  27. Lakshi Nandan Borah, Chandrangith K P, Sudipta Halder. Thermal characterization of polydopamine (Pd) based vitrimer polymer composites. 3rd International Conference on Recent Advancements in Mechanical Engineering, 04 – 06 February, 2022. NIT Silchar.
  28. Lakshi Nandan Borah, Sudipta Halder, Pannalal Choudhury, High-energy planetary ball-milling of Graphite and characterization of milled graphite based CFRP laminates, International Conference on Advances in Chemical and Materials Sciences, ACMS-2022.
  29. NI Khan, Sudipta Halder, MS Goyat, Lakshi Nandan Borah. Repetitive self-healing of Diels-Alder grafted graphene hybridized CFRP composites with outstanding mechanical properties, Soft Matter – manuscript (SM-ART-11-2022-001558).
  30. Lakshi Nandan Borah, Anubhav Saikia, Sudipta Halder, Pannalal Choudhury. fabrication of thermoformable polymer composite using biobased materials.
  31. Lakshi Nandan Borah,Sudipta Halder, Pannalal Choudhury, Mechanical characterization of CFRP laminates with graphitic based fillers produced by dry and wet ball milling method (Poster presentation), May 20 – 22, 2022, North-East Research Conclave, Indian Institute of Technology Guwahati, India.
  32. G G Giridhar1, Pannalal Choudhury, Sudipta Halder and Lakshi Nandan Borah, Hygrothermal properties of GFRPs infused with functionalized multi-walled carbon nanotubes (MWCNTs), (Poster presentation), May 20 – 22, 2022, North-East Research Conclave, Indian Institute of Technology Guwahati, India.
  33. Chandrangith K P, Lakshi Nandan Borah, Sudipta Halder, Anubhav Saikia, Tensile Characteristics of Polydopamine Based Vitrimer Polymer Composites, (Poster presentation), May 20 – 22, 2022, North-East Research Conclave, Indian Institute of Technology Guwahati, India.
  34. Sudipta Halder, Lakshi Nandan Borah, Chandrangith K P, Anubhav Saikia, Tensile Characteristics of Polydopamine Based Vitrimer Polymer Composites (exhibition), May 20 – 22, 2022, North-East Research Conclave, Indian Institute of Technology Guwahati, India.

EQUIPMENT AVAILABLE 

Computer controlled Simultaneous DSC-DTA–TGA System with Modular Concept STA 449 f3, Netzsch, 2016 Working
Universal Tensile Testing Machine, 50 KN, 5969, Instron, 2016 Working
Servo-hydraulic fatigue testing machine with environmental chamber. Instron, 100 KN,  2018 Working
Temperature and humidity chamber SR Lab Instruments, 2019 Working
Planetary Ball Milling, P7 premium line. Fritsch, 2015 Working
Vacuum assisted Resin transfer molding (VARTM) Indutch Composites Technology Pvt. Ltd. 2020 Working
Semi-automatic Micro hardness tester OMNI TECH, 2015 Working
Tube Furnace VNV eco projects PVT LTD, 2016
Hot air Ovens, 220V, YOMA, 2015 Working
Muffle Furnace 6612 (D), Indian Instruments Manf. Co. 2015 Working
Vacuum Hot air oven Jay Crucibles Working
Rotary Vane Vacuum Pump RV150, ACMAS Technologies, Inc. 2015 Working
Rotary Vacuum Pump DC-51, torr precivac, 2015 Working
Microprocessor based pH Meter 1012, Environment & Scientific Instrument Co. 2015 Working
Benchtop Centrifuge, R4C DX, Remi, 2015 Working
Magnetic Stirrer 1 MLH, REMI, 20154 Working
Digital Weighing Balance DXR-220, Ishida, 2015 Working
Precision Weighing Scale ML 204, Mettler Toledo, 2015 Working
Ultrasonic cleaner 230D, CREST Ultrasonics, 2015 Working
Overhead Stirrer RQ-20 PLUS, REMI, 2015 Working
Mentle Heater GL4303R, TEMM, 2016 Working
Hot Water Bath with Overhead Stirrer NOVA Instruments Pvt. Ltd., 2015 Working
Programmable Ultrasonicator, Q700, Q Sonica, 2015 Working
Ball Mill ATI-163, Obromax, 2015 Working
Chiller RT08025, Aditya Scientific, 2015 Working
Twin belt grinder TBG 011, Chennai Metco, 2015 Working
Polishing Machine PHV009, Chennai Metco, 2015 Working
Precission High Speed Cutting Machine HSS049, Chennai Metco, 2015 Working
Precision cutting machine, Chennai Metco, 2015 Working
Compression molding machine Working
Cooling Device for Computer controlled Simultaneous DSC-DTA–TGA System with Modular Concept Netzch Under process for procurement
Induction heating based composite heakling machine – Under process for procurement
Data acquisition system with microcontroller with IOT devices Under process for procurement

 

Comments

About Sudipta Halder

B.E. in Mechanical Engineering, M.Tech in Materials Engineering from Bengal University and Science University (BESU) presently, Indian Institute of Science and Technology (IIST), PhD. In Metallurgical and Materials Engineering Department at IIT Roorkee In “Characterization of ultrasonically dispersed nanoparticle filled epoxy adhesive” used at ambient and Elevated Temperatures applications in Automobile and Aerospace Industries under Guidance of Dr. P.K.Ghosh. Post-doctoral research at The University of Alabama, USA for 1 year, under prestigious BHAWAN fellowship supported by IUSSTF and DST, India. Worked at TATA consulting Engineers Limited in Process & Technology business unit for more than three years and completed many projects including, heterogonous catalyst, biodiesel, epoxy nanocomposites, sponge chrome, titanium pigments and many others related to iron and steel especially with TATA Steel. After that I Joined National Institute of Technology Silchar (An Institute of National Importance by MHRD, Govt. of India) as Assistant Professor, Department of Mechanical Engineering. Presently research area consisting of composite materials, laminated composites, self healing composites, nano structured materials, adhesive science and technology, encapsulation technology, low cost energy efficient building materials, phase change materials, thermo-mechanical behavior and fracture behavior of materials.