Dr. Sujit Nath

sn

Assistant Professor
Phone: +91-7896287211
Email: sujitnath[at]mech.nits.ac.in |sujitnath2008[at]gmail[dot]com
Date of Joining:
Academic/Industrial Experience: 14+ years
Google Scholar: Click Here

 

 

ACADEMIC QUALIFICATIONS (FULL DETAILS )

  • Ph.D. 

 

AREA OF INTEREST AND SPECIALIZATION (INCLUDING RESEARCH AREA)

  • Instability analysis
  • Droplet dynamics and atomization
  • CFD
  • Analytical Heat Transfer
  • Microfluidics and Micro-scale heat transfer
  • Bio Heat transfer
  • Wettability
  • Electronic cooling
  • Porous Media
  • Phase change material
  • Solar collector
  • Optimization

SHORT BIOGRAPHICAL SKETCH

Dr. Sujit Nath obtained B.E. in Mechanical Engineering from Jadavpur University, Kolkata, in 2001, and Ph.D. in Engineering from Jadavpur University in 2012. He has total 2 years of industrial experience in the field of Refrigeration & Air-conditioning and over 12 years of teaching experience. He joined as Asstt. Professor in the Department of Mechanical Engineering of National Institute of Technology (NIT) Silchar in May 2013. Dr. Nath is reviewer of various journals of repute such as International Journal of Heat and Mass Transfer (Elsevier), Energy(Elsevier), Fuel (Elsevier), Journal of Thermophysics and Heat Transfer (AIAA), Energy Conversion and Management (Elsevier), Heat & Mass Transfer (Springer)

BOOKS/ BOOK CHAPTERS

  • JB. R. Tamuli, Sujit Nath, Dipankar Bhanja, 2020. Numerical Study of Coaxial Evacuated Tube Collector with Nano-fluid, Lecture notes in Mechanical Engineering; Advances in Mechanical Engineering, Springer, Singapore, (Scopus) pp- 145-156. ISBN:978-981-15-0123-4 https://doi.org/10.1007/978-981-15-0124-1_15
  • Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2020. Linear Instability Analysis of Viscous Planar Liquid Sheet Sandwiched Between Two Moving Gas Streams, Lecture notes in Mechanical Engineering; Advances in Mechanical Engineering, Springer, Singapore, (Scopus) pp- 41-50. ISBN:978-981-15-0123-4, https://doi.org/10.1007/978-981-15-0124-1_5
  • Siddhant Mohapatra, Chanchal Gupta, Sujit Nath, Dipankar Bhanja, 2020. A Numerical Study on Microchannel Cooling for Photovoltaic Cells, Lecture notes in Mechanical Engineering; Advances in Mechanical Engineering, Springer, Singapore, (Scopus) pp- 1447-1455. ISBN:978-981-15-0123-4, https://doi.org/10.1007/978-981-15-0124-1_127
  • B.R. Tamuli, S. Nath, D. Bhanja 2021. Phase Change in an Enclosure Under Different Combinations of Boundary Wall Condition: A Numerical Study. In: Pandey K., Misra R., Patowari P., Dixit U. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, (Scopus) pp- 95-104. ISBN: 978-981-15-7710-9, https://doi.org/10.1007/978-981-15-7711-6_10
  • S. Sharma, D. Dasgupta, S. Nath, D. Bhanja 2021. Prediction of Droplet Size Distribution For Viscoelastic Liquid Sheet. In: Pandey K., Misra R., Patowari P., Dixit U. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, (Scopus) pp- 243-250. ISBN: 978-981-15-7710-9, https://doi.org/10.1007/978-981-15-7711-6_26
  • P. Bhattacharjee, S. Nath, D. Bhanja 2021. Numerical Analysis OF PCM Within a Square Enclosure Having Different Wall Heating Conditions. In: Pandey K., Misra R., Patowari P., Dixit U. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, (Scopus) pp- 477-485. ISBN: 978-981-15-7710-9, https://doi.org/10.1007/978-981-15-7711-6_48
  • B. B. Bora, Md. Zeeshan, S. Nath, D. Bhanja 2021. Numerical Modelling and Thermohydraulic Analysis of Circular Pipe Having Internal Vortex Generators. In: Pandey K., Misra R., Patowari P., Dixit U. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, (Scopus) pp- 487-498. ISBN: 978-981-15-7710-9, https://doi.org/10.1007/978-981-15-7711-6_50
  • Debayan Dasgupta, Saurabh Sharma, Sujit Nath, Dipankar Bhanja 2021. Linear Stability Analysis of Viscoelastic Liquid Sheet in Presence of Moving Gas Medium. In: Pandey K., Misra R., Patowari P., Dixit U. (eds) Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, (Scopus) pp- 251-257. ISBN: 978-981-15-7710-9, https://doi.org/10.1007/978-981-15-7711-6_27

SUBJECTS TAUGHT (INCLUDING SUBJECTS CURRENTLY TEACHING)

  • Advanced Fluid Mechanics
  • Numerical Methods in Fluid Flow and Heat Transfer
  • Fluid Mechanics-I
  • Fluid Mechanics-II
  • Heat Transfer
  • Finite Element Method
  • CFD

MEMBER

AWARDS & RECOGNITIONS

 

ADMINISTRATIVE RESPONSIBILITY

 

  •  Associate Dean(Exam)

INTERNATIONAL JOURNALS

    1. Debayan Dasgupta, Saurabh Sharma, Sujit Nath, Dipankar Bhanja, 2021. Effects of Elasticity Number and Time Constant Ratio on Breakup and Droplet Formation of Viscoelastic Planar Liquid Sheet Co-flowing with Gases of Equal Velocities, Journal of Fluid Mechanics, Cambridge University Press (United Kingdom), Accepted for publication, SCIE (Impact Factor: 3.354) ISSN: 0022-1120
    2. Tuhin Deshamukhya, Dipankar Bhanja, Sujit Nath, 2021. A Metaheuristic Analysis of Heat Transfer Rates through Porous Fins of Tapered and Step Profiles: A Comparative Study, Neural Computing and Applications, Springer, Accepted, https://doi.org/10.1007/s00521-021-05911-0, SCIE (Impact Factor: 4.744) ISSN: 1433-3058.
    3. Bhaskar Ranjan Tamuli, S. Nath, D. Bhanja, 2021. Unveiling the melting phenomena of PCM in a latent heat thermal storage subjected to temperature fluctuating heat source, International Journal of Thermal Sciences, Elsevier, Vol. 164, February 2021, 106879 https://doi.org/10.1016/j.ijthermalsci.2021.106879, SCIE (Impact Factor: 3.488) ISSN: 1290-0729.
    4. Saha, S., Biswas, P., Nath, S., 2020. Numerical simulations of Newtonian fluid flow through a suddenly contracted rectangular channel with two different types of baffle plates, Soft Computing, Springer, Accepted SCIE (Impact Factor: 3.050) ISSN: 1433-7479. DOI: 10.1007/s00500-020-05326-4
    5. Tuhin Deshamukhya, Dipankar Bhanja, Sujit Nath, 2020. Heat transfer enhancement through porous fins: A comprehensive review of recent developments and innovations, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, SAGE Publications, Accepted, SCIE (Impact Factor: 1.359) ISSN: 0954-4062.
    6. A. Hazarika, D. Bhanja, S. Nath, 2020. Fork-shaped constructal fin array design a better alternative for heat and mass transfer augmentation under dry, partially wet and fully wet conditions, International Journal of Thermal Sciences, Elsevier, Vol. 152, June 2020, 106329 https://doi.org/10.1016/j.ijthermalsci.2020.106329, SCIE (Impact Factor: 3.488) ISSN: 1290-0729.
    7. Mohd Zeeshan, S. Nath , D. Bhanja, 2020. Numerical analysis to predict the optimum configuration of fin and tube heat exchanger with rectangular vortex generators for enhanced thermohydraulic performance, Heat and Mass Transfer, Springer Berlin Heidelberg, Vol. 44(12), pp. 1-11. https://doi.org/10.1007/s00231-020-02843-8 SCI (Impact Factor: 1.551) ISSN: 0947-7411.
    8. Tuhin Deshamukhya, Dipankar Bhanja, Sujit Nath, 2020. Optimization of Constructal T-shaped Porous Fins under Convective Environment using Swarm Intelligence Algorithms, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, SAGE Publications, Accepted, SCIE (Impact Factor: 1.104) ISSN: 0954-4100.
    9. Tuhin Deshamukhya, Dipankar Bhanja, Sujit Nath, 2020. Application of metaheuristic algorithms in optimum thermal design analysis of a rectangular porous fin subjected to both insulated and convective tip conditions, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, SAGE Publications, Accepted, SCIE (Impact Factor: 1.694) ISSN: 0957-6509.
    10. Saheera Azmi Hazarika, Tuhin Deshmukhya, Dipankar Bhanja, Sujit Nath, 2020. A novel optimum constructal fork-shaped fin array design for simultaneous heat and mass transfer application in a space-constrained situation, International Journal of Thermal Sciences, Elsevier, Vol. 150, 106225, https://doi.org/10.1016/j.ijthermalsci.2019.106225, SCIE (Impact Factor: 3.488) ISSN: 1290-0729.
    11. Bhaskar Ranjan Tamuli, Saranga Sekhar Saikia, Sujit Nath, Dipankar Bhanja, 2020. Thermal performance analysis of a co-axial evacuated tube collector with single and two-phase flow consideration under North-eastern India climatic condition, Solar Energy, Elsevier, Vol. 196, (2020), pp. 107-124 https://doi.org/10.1016/j.solener.2019.11.097, SCIE (Impact Factor: 4.674) ISSN: 0038-092X.
    12. Mohd Zeeshan, S. Nath , D. Bhanja, 2019. Numerical investigation to predict optimum attack angle combination of longitudinal vortex generators in compact heat exchangers for thermo-hydraulic heightened performance, Sādhanā, Springer India, Vol. 44(12), pp. 241. https://doi.org/10.1007/s12046-019-1219-5 SCIE (Impact Factor: 0. 769) ISSN: 0256-2499.
    13. Tuhin Deshamukhya, Ratnadeep Nath, Saheera Azmi Hazarika, Dipankar Bhanja, Sujit Nath, 2019. A modified firefly algorithm to maximize heat dissipation of a rectangular porous fin in heat exchangers exposed to both convective and radiative environment, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, SAGE Publications, Vol. 233(6), pp. 1203-1216 DOI: 10.1177/0954408919861244, SCI (Impact Factor: 1.126) ISSN: 0954-4089.
    14. A. Hazarika, D. Bhanja, S. Nath, 2019. A novel optimal constructal fork-shaped fin array design to ascertain thermo-heightened performance under dehumidifying conditions, International Journal of Thermal Sciences, Elsevier, Vol. 144, pp. 67-78 https://doi.org/10.1016/j.ijthermalsci.2019.06.003, SCIE (Impact Factor: 3.488) ISSN: 1290-0729.
    15. Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2019. A study on dual role of viscosity on the stability of a viscous planar liquid sheet surrounded by inviscid gas streams of equal velocities, and prediction of resulting droplet distribution using maximum entropy formulation, Physics of Fluid, AIP Publishing (United States), Vol. 31(074103), pp. 1-22. https://doi.org/10.1063/1.5097692 SCI (Impact Factor: 2.627) ISSN: 1089-7666.
    16. Mohd Zeeshan, S. Nath , D. Bhanja, 2019. Determination of optimum winglet height of longitudinal vortex generators for the best thermo-hydraulic performance of compact heat exchangers, Journal of Mechanical Science and Technology, Springer, Vol. 33(9), pp. 4529-4534. DOI 10.1007/s12206-019-0849-1 (Citation: 1) SCIE (Impact Factor: 1. 221) ISSN: 1976-3824.
    17. A. Hazarika, D. Bhanja, S. Nath, 2019. Optimal Design of Constructal T-Shaped Fin Under Partially Wet Condition for Enhanced Thermal Performance: An Analytical Approach, Heat Transfer Engineering, Taylor & Francis, https://doi.org/10.1080/01457632.2019.1611137, pp. 1-18, SCI (Impact Factor: 1.703) ISSN: 0145-7632.
    18. Saranga Sekhar Saikia, Sujit Nath, Dipankar Bhanja, 2019. Effect of vacuum deterioration on thermal performance of coaxial evacuated tube solar collector considering single and two phase flow modelling: A numerical study, Solar Energy, Elsevier, Vol. 177, (2019), pp. 127-143 https://doi.org/10.1016/j.solener.2018.10.089, (Citation: 5) SCIE (Impact Factor: 4.674) ISSN: 0038-092X.
    19. Debayan Dasgupta, Sujit Nath, Achintya Mukhopadhyay, 2019. Linear and Non-linear Analysis of Breakup of Liquid Sheets: A Review, Journal of the Indian Institute of Science, Springer, https://doi.org/10.1007/s41745-018-0093-1. SCIE (Impact Factor: 1.151) ISSN: 0019-4964.
    20. Deshamukhya, S. A. Hazarika, D. Bhanja, S. Nath, 2018. An optimization study to investigate non-linearity in thermal behaviour of porous fin having temperature dependent internal heat generation with and without tip loss, Communications in Nonlinear Science and Numerical Simulation, Elsevier, Vol. 67, pp. 351-365. https://doi.org/10.1016/j.cnsns.2018.07.024 (Citation: 2) SCIE (Impact Factor: 3.967) ISSN: 1007-5704.
    21. Deshamukhya, D. Bhanja, S. Nath, S. A. Hazarika, 2018. Prediction of optimum design variables for maximum heat transfer through a rectangular porous fin using Particle Swarm Optimization, Journal of Mechanical Science and Technology, Springer, Vol. 32(9), pp. 4495-4502. DOI 10.1007/s12206-018-0846-9 (Citation: 4) SCIE (Impact Factor: 1. 221) ISSN: 1976-3824.
    22. Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2018. Dual-mode nonlinear instability analysis of a confined planar liquid sheet sandwiched between two gas streams of unequal velocities and prediction of droplet size and velocity distribution using maximum entropy formulation, Physics of Fluid, AIP Publishing (United States), Vol. 30(044104), pp. 1-24. https://doi.org/10.1063/1.5022346 (Citation: 3) SCI (Impact Factor: 2.627) ISSN: 1089-7666.
    23. A. Hazarika, D. Bhanja, S. Nath, B. Kundu, 2018. Thermal design parameters of a wet T-shaped fin for linear variation of humidity ratio with saturation temperature, Journal of Mechanical Science and Technology, Springer, Vol. 32(5), pp. 2391-2397. DOI 10.1007/s12206-018-0451-y (Citation: 5) SCIE (Impact Factor: 1.221) ISSN: 1976-3824.
    24. Mohd Zeeshan, S. Nath , D. Bhanja, 2018. Numerical investigation for the optimal placements of rectangular vortex generators for improved thermal performance of fin-and-tube heat exchangers, Applied Thermal Engineering, Elsevier, Vol. 136, pp. 589-601. https://doi.org/10.1016 /j.applthermaleng. 2018. 03. 006 (Citation: 11) SCIE (Impact Factor: 4.026) ISSN: 1359-4311.
    25. Kumar, S. Nath, D. Bhanja, 2018. Effect of nanofluid on thermo hydraulic performance of double layer tapered microchannel heat sink used for electronic chip cooling, Numerical Heat Transfer part –A, Taylor & Francis, Vol. 73:7, pp. 429-445. DOI:10.1080/10407782.2018.1448611 (Citation: 7) SCI (Impact Factor: 1.953) ISSN: 1040-7782.
    26. A. Hazarika, D. Bhanja, S. Nath, B. Kundu, 2017. Accurate predictions for optimum design of a T-shaped fin under an actual wet load condition, International Journal of Refrigeration, Elsevier, Vol. 82, pp. 141-162. https://doi.org/10.1016/j.ijrefrig.2017.06.032 (Citation: 3) SCI (Impact Factor: 3.177) ISSN: 1004-9541.
    27. Mohd Zeeshan, S. Nath , D. Bhanja, 2017. Numerical study to predict optimal configuration of fin and tube compact heat exchanger with various tube shapes and spatial arrangements, Energy Conversion and Management, Elsevier, Vol. 148, pp. 737-752. http://dx.doi.org/10.1016/j.enconman.2017.06.011 (Citation: 25) SCIE (Impact Factor: 7.181) ISSN: 0196-8904.
    28. A. Hazarika, T. Deshamukhya, D. Bhanja, S. Nath, 2017. Thermal analysis of a constructal T-shaped porous fin with simultaneous heat and mass transfer, Chinese Journal of chemical Engineering, Elsevier, Vol. 25, pp. 1121-1136 http://dx.doi.org/10.1016/j.cjche.2017.03.034 (Citation: 7) SCIE (Impact Factor: 1.911) ISSN: 1004-9541.
    29. A. Hazarika, D. Bhanja, S. Nath, B. Kundu, 2016. Geometric optimization and performance study of a constructal T-shaped fin under simultaneous heat and mass transfer, Applied Thermal Engineering, Elsevier, Vol. 109, pp. 162-174. http://dx.doi.org/10.1016/j.applthermaleng.2016.08.007 (Citation: 15) SCI (Impact Factor: 4.026) ISSN: 1359-4311.
    30. A. Hazarika, D. Bhanja, S. Nath, B. Kundu, 2015. Analytical solution to predict performance and optimum design parameters of a constructal T-shaped fin with simultaneous heat and mass transfer, Energy, Elsevier, Vol. 84, pp. 303-316. http://dx.doi.org/10.1016/j.energy.2015.02.102 (Citation: 24) SCI (Impact Factor: 5.537) ISSN: 0360-5442
    31. Nath, A. Mukhopadhyay, A. Datta, S. Sarkar, S. Sen, 2014. Effect of confinement on breakup of planar liquid sheets sandwiched between two gas streams and resulting spray characteristics, Fluid Dynamics Research, IOP Science, Vol. 46(1). pp. 015511. https://doi.org/10.1088/0169-5983/46/1/015511 (Citation: 6) SCI (Impact Factor: 0.993) ISSN: 1873-7005
    32. Nath, A. Datta, A. Mukhopadhyay, S. Sen, T. J. Tharakan, 2011. Prediction of size and velocity distributions in sprays formed by the breakup of planar liquid sheets using maximum entropy formalism, Atomization and Sprays, Begel House, Vol. 21 (6). pp. 483-501. DOI: 10.1615/AtomizSpr.2011003709 (Citation: 13) SCI (Impact Factor: 1.262) ISSN: 1044-5110
    33. Nath, A. Mukhopadhyay, A. Datta, S. Sen, T. J. Tharakan, 2010. Influence of gas velocity on breakup of planar liquid sheets sandwiched between two gas streams, Atomization and Sprays, Begel House, Vol. 20 (11). pp. 983-1003. DOI: 10.1615/AtomizSpr.v20.i11.50 (Citation: 14) SCI (Impact Factor: 1.262) ISSN: 1044-5110

 

 INTERNATIONAL CONFERENCES

    1. Sandip Saha, Pankaj Biswas, Sujit Nath, 2021. A review on spectral element solver Nek5000, AIP Conference Proceedings 2336, 030001 (2021); https://doi.org/10.1063/5.0045709
    2. Saha S., Biswas P., Nath S., 2020. Numerical Modeling of Bifurcation and Leakage of Blood Flow in Mitral Valve to Predict Heart Malfunctioning. In: Dawn S., Balas V., Esposito A., Gope S. (eds) Intelligent Techniques and Applications in Science and Technology. ICIMSAT 2019. Learning and Analytics in Intelligent Systems, vol 12. Springer, Cham. https://doi.org/10.1007/978-3-030-42363-6_80
    3. Saha, S., Biswas, P., Nath, S., 2020. Bifurcation phenomena for incompressible laminar flow in expansion channel to study Coanda effect, Journal of Interdisciplinary Mathematics, Taylor and Francis (Scopus); Vol. 23 (2), pp. 493–502; DOI : 10.1080/09720502.2020.1731962 ; ISSN: 0972-0502.
    4. Zeeshan, V. Kumar, S. Nath, D. Bhanja, 2019. A Numerical Investigation on the Performance of Finned Tube Heat Exchangers Having Alternate Arrangements of Flat and Circular Tubes, International Conference on Applied Physics, Power and Material Science, Journal of Physics: Conf. Series 1172 (2019) 012057 , IOP Publishing, doi:10.1088/1742-6596/1172/1/012057
    5. Kashmiri Deka, Dipankar Bhanja, Sujit Nath, 2018. Fundamental solution of steady and transient bio heat transfer equations especially for skin burn and hyperthermia treatments, Heat Transfer – Asian Research, Wiley, pp. 1-18, DOI:10.1002/htj.21388 ESCI, ISSN: 1523-1496.
    6. Mohd Zeeshan, Sujit Nath, Dipankar Bhanja, 2018. A CFD Analysis to Compare the Performances of Fin and Tube Heat Exchangers having Different Augmentation Techniques, International Journal of Applied Engineering Research, vol. 13 (6), pp. 327-333, ISSN 0973-4562.
    7. Mohd Zeeshan, Saheera Azmi Hazarika, Sujit Nath, Dipankar Bhanja, 2017. Numerical investigation on the performance of fin and tube heat exchangers using rectangular vortex generators, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020011 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990164, (Citation: 5)
    8. Saheera Azmi Hazarika, Mohd Zeeshan, Dipankar Bhanja, Sujit Nath, 2017. Analytical study on the thermal performance of a partially wet constructal T-shaped fin, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020039 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990192
    9. Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2017. Linear stability analysis of planar liquid sheet with unequal gas velocities confined between two solid walls, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020113 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990266 (Citation: 1)
    10. Tuhin Deshamukhya, Dipankar Bhanja, Sujit Nath, Ambarish Maji, Gautam Choubey, 2017. Analytical study of temperature distribution in a rectangular porous fin considering both insulated and convective tip, FCSPTC-2017, 7-8 April 2017, Andhrapradesh, INDIA, AIP Conference Proceedings 1859, 020031 (2017), SCOPUS, http://dx.doi.org/10.1063/1.4990184 (Citation: 2)
    11. Somnath Pal, Sujit Nath, Dipankar Bhanja, 2016. Modelling of phase change material used as a latent heat thermal reservoir, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
    12. Ratnadeep Nath, Dipankar Bhanja, Sujit Nath, 2016. Analytical study of thermal behaviour of a rectangular porous fin with temperature dependent heat generation, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
    13. Prabhakar Jha, N. V. Deshpande, Sujit Nath, 2016. CFD simulation of Indian Freight train aerodynamics, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
    14. Sharanga Bora, Sujit Nath, 2016. Numerical analysis of Coanda ejector for heat sink applications, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
    15. Debayan Dasgupta, Sujit Nath, Dipankar Bhanja, 2016. Nonlinear analysis of breakup of a thin planar liquid sheet subjected to unequal gas velocities, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
    16. Aabir Das, Sujit Nath, Dipankar Bhanja, 2016. Numerical modeling of fin-and-tube heat exchanger with vortex generators, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
    17. Abhijeet Borthakur, Dipankar Bhanja, Sujit Nath, 2016. Numerical modeling of phase change material to enhance heat transfer using extended surfaces, FMFP2016, MNNITA, Allahabad, U.P., India, December 15-17, 2016.
    18. Saini, D. Bhanja, S. Nath, A. Biswas, 2015. Energy and Exergy Analysis of a Flat Plate Collector Solar Water Heater, ISESCO JOURNAL of Science and Technology vol. 11 (20), pp. 2-8.
    19. Nath, A. Mukhopadhyay, A. Datta, S. Sen, 2012. Analysis of disintegration of planar liquid sheet sandwiched between gas streams with unequal velocities and resulting spray formation, ICLASS 2012, 12th Triennial International Conference on Liquid Atomization and Spray Systems, Heidelberg, Germany, September 2-6, 2012.
    20. Nath, A. Mukhopadhyay, S. Sen, A. Datta 2009. Instability Analysis of a Plane Liquid Sheet Sandwiched Between Two Gas Streams of Nonzero Unequal Velocities, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, https://doi.org/10.2514/6.2009-5157

 

WORKSHOP

CONFERENCE ORGANIZED

 

PHD SCHOLARS

 

Sl. No. Name of the Scholar Status Research Area Supervision

M.TECH. SCHOLARS

Roll Number Name Year

 Project Title

 

 

Comments