Associate Professor
Phone: +91-9733544513, 9678821875
Email: srmaity[at]mech.nits.ac.in |  saikat.jumtech@gmail.com
Date of Joining: 18/11/2015
Academic/Industrial Experience: 14+ years
Google Scholar: Click Here

 

ACADEMIC QUALIFICATIONS (FULL DETAILS )

  • B.Tech. (Production Engineering, 2006) from the West Bengal University of Technology (Presently known as Maulana Abul Kalam Azad University of Technology)
  • M.Tech. (Material Engineering, 2008) from Jadavpur University
  • Ph.D. (Engineering, 2014) from the Production Engineering Department of Jadavpur University

AREA OF INTEREST AND SPECIALIZATION (INCLUDING RESEARCH AREA)

  • Additive Manufacturing
  • Digital Twin (DT)
  • Synthesis and Characterization of Metal Matrix Composites (MMC) through Powder Metallurgy (PM)
  • Advanced (Non-traditional) Machining
  • Surface Modification through thin films Coating & Heat Treatment
  •  Tribology
  •  Laser Welding
  • Application of Soft Computing Techniques in Manufacturing
  • Manufacturing Process Modelling & Optimization
  • Artificial Intelligence (AI) and Machine Learning (ML) applications in Manufacturing
  • Multi-criteria Decision Making (MCDM) Techniques

SHORT BIOGRAPHICAL SKETCH

Dr. Maity is an Assistant Professor in the Department of Mechanical Engineering at the National Institute of Technology (NIT) Silchar. Before joining NIT Silchar, he worked as a Lecturer in the Department of Production Engineering at Haldia Institute of Technology (Haldia, West Bengal) from 12th January 2009 to 31st August 2010. He served as an Assistant Professor in the same department from 1st September 2010 to 16th November 2015. He also worked as a Research Scientist in the Ministry of Steel & TATA Steel sponsored project entitled ‘Fatigue Behaviour Analysis of Spot Welded, Laser Welded and Adhesive Bonded High Strength Steel Sheet Joint’ under the guidance of Prof. Tapan Kumar Pal, Department of Metallurgical & Material Engineering of Jadavpur University and Dr. M. Shom, Researcher, TATA Steel Ltd. from 21st July 2008 to 5th January 2009.

PATENT(S)

  1. Patnaik, S. Kuma, S. R. Maity, Anderson, S. Chettri, G. M. Kumar, Canned Drinks Dispenser, (Indian Patent, Status: Design Accepted, Registered on 07/11/2022, Design No. 373687-001).
  2. Kumar, L. Patnaik, J. Gajjar, S. Chettri, A. Roy, S. R. Maity, Water Trolley for Terrains, (Indian Patent, Status: Design Accepted, Registered on 07/01/2022, Design No. 373686-001).

EDITORSHIP

BOOKS/ BOOK CHAPTERS

  1. Aluminium Metal Matrix Composites Fabricated by Powder Metallurgy Techniques: A Review, G Manohar, KM Pandey, SR Maity, Advances in Material Science and Metallurgy, Lecture Notes in Mechanical Engineering, Springer, Singapore, 2023, 51-61.
  2. Mapping Uncertain Surface Roughness of Inconel 718 in WEDM, S Saha, SR Maity, S Dey, Recent Advances in Manufacturing Modelling and Optimization, Springer, 2022, 143-148.
  3. Surrogate Model Validation and Verification for Random Failure Analyses of Composites, Kushari, A. Chakraborty, T. Mukhopadhyay, R.R. Kumar, S. R. Maity, S. Dey, Recent Advances in Layered Materials and Structures, Springer, Singapore 2021, 331-351.
  4. Finite Element Analysis of Stamping Process of Maraging Steel Built-Up Wing Panel of a Missile, P Sridhar Reddy, BVR Reddy, SR Maity, KM Pandey, Recent Advances in Mechanical Engineering, Springer, Singapore, 2021, 319-33.
  5. Application of Box-Behnken Method for Multi-response Optimization of Turning Parameters for DAC-10 Hot Work Tool Steel, S Kumar, SR Maity, L Patnaik, Recent Advances in Mechanical Engineering, Springer, 2021, 407-415.
  6. Identification of Parameters for Ultrasonic Machining (USM) on Drilling of Graphene Oxide/Pineapple Leaf Filler-Reinforced Epoxy Hybrid Composite Using TODIM Method, A Bania, SR Maity, Recent Advances in Mechanical Engineering, Springer, 2021, 361-366.
  7. Effect of Sintering Temperatures on Mechanical Properties of AA7075/B4C/Graphite Hybrid Composite Fabricated by Powder Metallurgy Techniques, G Manohar, SR Maity, KM Pandey, Recent Advances in Mechanical Engineering, Springer, 2021, 343-350.
  8. Experimental Investigation of Dimensional Deviation of Square Punches Cut by Wire EDM of A286 Superalloy, S Saha, SR Maity, S Dey, Recent Advances in Mechanical Engineering, Springer, 2021, 677-684.
  9. Preheating Path Selection through Numerical Analysis of Laser-Aided Direct Metal Deposition, D Raj, B Das, SR Maity, Recent Advances in Mechanical Engineering, Springer, 2021, 211-220.
  10. ANN-Based Random First-Ply Failure Analyses of Laminated Composite Plates, S Kushari, A Chakraborty, T Mukhopadhyay, SR Maity, S Dey, Recent Advances in Computational Mechanics and Simulations, Springer, 2021, 131-142.
  11. An Integrated Fuzzy-Based Methodology for Selection of Casting Pattern Material, Zindani, S. R. Maity, S. Bhowmik, Soft Computing: Theories and Applications, Springer, Singapore, 2020, 291-299.
  12. Conceptualization of a Machining Fixture for Machining Cylinder Block on a Horizontal Machining Center, Patnaik, S. R. Maity, S. Kumar, Advances in Mechanical Engineering, Springer, Singapore, 2020, 185-204.
  13. Artificial-Neural-Network-Based Uncertain Material Removal Rate by Turning, Subhankar Saha, Saikat Ranjan Maity, Sudip Dey, Springer, Singapore, 2020, 591-596.
  14. Computational Wear Analysis of Acetabular Cup for Various Daily Activities with Different Biomaterials, Patnaik, S. R. Maity, S.Kumar, Advances in Computational and Bio-Engineering, Springer, Cham, 2020, 119-128.
  15. Machining Performance Evaluation of Al 6061 T6 Using Abrasive Water Jet Process, P. K. Shahu, S.R. Maity, Advances in Unconventional Machining and Composites: Proceedings of AIMTDR 2018, Springer, Singapore, 2020, 127-129.
  16. Fuzzy-EDAS (Evaluation Based on Distance from Average Solution) for Material Selection Problems, Zindani, S. R. Maity, S. Bhowmik, Advances in Computational Methods in Manufacturing, Springer, Singapore, 2019, 755-771.
  17. A Decision-Making Approach for Material Selection of Polymeric Composite Bumper Beam, D. Zindani, S. R. Maity, S. Bhowmik, Composites and advanced materials for industrial applications, IGI Global, 2018, 112-128.

SUBJECTS TAUGHT (INCLUDING SUBJECTS CURRENTLY TEACHING)

  • Conventional Manufacturing Processes
  • Advanced Manufacturing Processes
  • Material Science
  • Operation Research
  • Industrial Engineering
  • Workshop Practice
  • Fracture Mechanics
  • Material Selection & Safety
  • Production Management.

MEMBER

  1. Life member, Indian Society for Technical Education (ISTE), Membership No.: LM-131349.
  2. Life member, The Institute of Engineers (India), Membership No.: M-1703344.
  3. Senior Member, Indian Institution of Industrial Engineering, Membership No.: S.M.I.I.E.-11278(11).
  4. Member, IAENG Society of Industrial Engineering, Membership No.: 278913.
  5. Member, IAENG Society of Mechanical Engineering, Membership No.: 278913.

AWARDS & RECOGNITIONS

  1.  Received best paper award (student: Mrs. Papari Das) in the session “Characterization: Material Characterization” for the paper presented at the International Conference on Processing and Characterization of materials (ICPCM-2022), Sri Sivasubramaniya Nadar College of Engineering (An Autonomous Institution, Affiliated to Anna University), Kalavakkam, Chennai-603110, India, 7th & 8th March 2022.
  2. Received best paper award (student: Mr. Sunil Kumar) on the theme of “Advanced Manufacturing Process” for the paper presented at the 11th International Conference on Materials Processing and Characterization (ICMPC-2020), IIT Indor, Madhya Pradesh, 15th-17th December 2020.
  3. Received best paper award (student: Mr. Lokeswar Patnaik) for the paper presented at the 12th International Conference on Materials Processing and Characterization (ICMPC-2021), National Institute of Technical Teachers Training & Research, Chandigarh, Sector-26, Chandigarh-160019, India, 6th-9th October 2021.
  4. Received best paper award (student: Mr. Sunil Kumar) for the paper presented at the 12th International Conference on Materials Processing and Characterization (ICMPC-2021), National Institute of Technical Teachers Training & Research, Chandigarh, Sector-26, Chandigarh-160019, India, 6th-9th October 2021.

ADMINISTRATIVE RESPONSIBILITY

  • Workshop In-charge
  • Faculty In-charge (Vehicle Management)

INTERNATIONAL JOURNALS

  1. Effect of Fabrication Techniques on Mechanical and Microstructural behavior of AA7075/SiC/ZrC Hybrid composite, G Manohar, A. Kumar, MVNV Satyanarayana, S.R. Maity, K.M. Pandey, V. Reddy, B. P. Mahammod, Ceramics International, 2023.
  2. Enhanced Morphological, Mechanical and Dielectric Properties of Paraffin Wax incorporated with Polyaniline (PANI) and Reduced Graphene Oxide (RGO) nanocomposites, P. Das, A. B. Deoghare, S. R. Maity, Diamond & Related Materials, 2023.
  3. Carbon-Fiber-Reinforced-PEEK and Silicon doped Amorphous Carbon as a Potential Tribopair for Implant Application, L. Patnaik, S. Kumar, J. Gajjar, A. Deepak, J. Naidana, V.S.S. Venkatesh, M. Lepicka, S. R. Maity, S. M. Shafi and S. Chetri, Advances in Materials and Processing Technologies, 2023.
  4. Hydroxyapatite/Si-doped TiN interlayer coatings as potential candidates for surface modification of Medical Grade 316 LVM stainless steel for bioimplant applications, M. Shafi, L. Patnaik, S. R. Maity, S. Kumar, K. K Saxena, C. Prakash, D. Buddhi, Surface Review and Letters, 2023.
  5. Effect and optimization of tribological parameters upon wear responses of TiAlN coating, S. Kumar, S. R. Maity , L. Patnaik, Emerging Materials Research, 12(1), 2023, 68-77.
  6. Machining complex profile on NAB alloy through WEDM process using zinc-coated brass wire, D. K. Sonkar, S. Saha, S. R. Maity, S. Dey, Journal of Materials Engineering and Performance, 2022.
  7. Application of integrated BWM Fuzzy-MARCOS approach for coating material selection in tooling industries, S. Kumar, S. Bhaumik, L.  Patnaik, S. R. Maity and V. Paleu, Materials, 2022.
  8. Box-Behnken based investigation of Surface Quality and Tool Wear Rate and FEM Analysis of Tool wear in TiAlN/CrN coated carbide tool, L. Patnaik, S. Kumar, J. Gajjar, P. Dash, S. R. Maity, M. Łępicka, B. Dev, International Journal on Interactive Design and Manufacturing, 2022.
  9. Fuzzy CODAS Based Analysis of Wear and Temperature Induced Responses of Si Doped a-C film and CFRPEEK Tribopair, Patnaik, S. Kumar, S. R. Maity, M. Łępicka& A. Anderson , Silicon, 2022
  10. Comparative analysis of metaheuristic optimizers in the performance optimization of Wire electric discharge machining processes, Saha, S. R. Maity, S. Dey,Operational Research in Engineering Sciences: Theory and Applications, 6(1), 2023, 115-142.
  11. Probabilistic investigation of geometric responses in Wire EDM machined complex-shaped profile: A machine learning based approach , Saha, K. Gupta, S. R. Maity, S. Dey, The Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2022.
  12. Vibration analysis of cracked cantilever beam using response surface methodology, D. D. Pathak, S. Kushari, S. R. Maity, L. Patnaik, S. Kumar, S. Dey, Journal of Vibration Engineering & Technologies, 2022.
  13. Wear parameter optimization of ceramic coating using the fuzzy integrated PSI-CODAS decision-making framework, S Kumar, SR Maity, L Patnaik, Arabian Journal for Science and Engineering, 48, 2023, 3819–3841.
  14. Effect of Mean Stress on Ratchetting of Austenitic Stainless Steel (AISI 304) at Room Temperature, SR Maity, S Kumar, L Patnaik, Physics of Metals and Metallography, 123, 2022, 1509–1517.
  15. Optimization of Wear Parameters for Duplex-TiAlN Coated MDC-K Tool Steel Using Fuzzy MCDM Techniques, S Kumar, SR Maity, L Patnaik, Operational Research in Engineering Sciences: Theory and Applications, 5(3), 2022, 40-67.
  16. Machinability study of A286 Superalloy for complex profile generation through Wire Electric Discharge Machining, S. Saha, S. R. Maity, S. Dey, Arabian Journal for Science and Engineering, 48, 2023, 3241–3253.
  17. Wear parameter optimization for CrN/TiAlSiN coating using novel BWM integrated TODIM decision-making approach, S. Kumar, L. Patnaik, S. M. Shafi, V.S.S. Venkatesh, S. R. Maity, International Journal on Interactive Design and Manufacturing, 17, 2023,579–601.
  18. Probability-based unified sensitivity analysis for multi-objective performances of composite laminates: A surrogate-assisted approach, S. Kushari, T. Mukhopadhyay, A. Chakraborty, S.R. Maity, S. Dey, Composite structures, 294, 2022, 115559.
  19. Effect of spark plasma sintering on microstructure and mechanical properties of AA7075/B4C/ZrC hybrid nanocomposite fabricated by powder metallurgy techniques, G Manohar, KM Pandey, SR Maity, Materials Chemistry and Physics, 282, 2022, 126000.
  20. A novel BWM integrated MABAC decision-making approach to optimize the wear parameter of CrN/TiAlSiN coating, S. Kumar, S. R. Maity, L. Patnaik, Journal of Industrial and Management Optimization, 19(4), 2022, 2676–2703.
  21. Morphology and wear behavior of monolayer TiAlN and composite AlCrN/TiAlN coated plasma nitrided DAC-10 tool steel, S. Kumar, S. R. Maity, L. Patnaik, Arabian Journal for Science and Engineering, 47, 2022, 15519-15538.
  22. Enhancement of microstructure and mechanical performance of spray formed Al-6Si-18Pb Alloy by warm rolling, V.R. Reddy, S.R. Maity, K.M. Pandey, L. Patnaik, S. Kumar, Advances in Materials and Processing Technologies, 8(S4), 2022, 2262–2276.
  23. Relative effect of wear parameter on wear behavior of TiAlN coated tool steel and parametric optimization using MCDM method, S Kumar, L Patnaik, SM Shafi, SR Maity, Advances in Materials and Processing Technologies, 8(S4), 2022, 1961–1982.
  24. Synergistically improved thermal stability and electromagnetic interference shielding effectiveness (EMI SE) of in-situ synthesized polyaniline/sulphur doped reduced graphene oxide (PANI/S-RGO) nanocomposites, P. Das, A. B. Deoghare, S. R. Maity, Ceramics International, 48 (8), 2022, 11031-11042.
  25. Comparative study on the structural make-up and mechanical behavior of silicon and silver doped amorphous carbon films, L. Patnaik, S. R. Maity, S. Kumar, Silicon,14, 2022, 9617–9634.
  26. A Novel Decision-Making Tool for Performance Evaluation of Vegetable Oils used as Heat Transfer Fluids in Concentrated Solar Power Plants, D. Zindani, S. R. Maity, S. Bhowmik, Environment, Development and Sustainability, 24, 2022, 13334–13377.
  27. Effect of Variations in Microwave Processing Temperatures on Microstructural and Mechanical Properties of AA7075/SiC/Graphite Hybrid Composite Fabricated by Powder Metallurgy Techniques, G Manohar, KM Pandey, SR Maity, Silicon, 14, 2022, 7831-7847.
  28. Data-driven probabilistic performance of Wire EDM – A machine learning based approach, S. Saha, K. Gupta, S. R. Maity, S. Dey, The Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 236 (6-7), 2022, 908-919.
  29. Wear assessment of Cr2O3/TiAlN coated DAC-10 tool steel against steel and Al2O3 counterbodies, S. Kumar, S. R. Maity, L. Patnaik, International Journal of Applied Ceramic Technology, 19(3), 2022, 1678-1690.
  30. Modeling and combined application of MOEA/D and TOPSIS to optimize WEDM performances of A286 Superalloy, Saha, S. R. Maity, S. Dey, S. Dutta, Soft Computing, 25,2021, 14697–14713.
  31. State of the art review on laser cladding process as an in-situ repair technique, Raj, SR Maity, B. Das, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(3), 2022, 1194–1215.
  32. Microstructural and Mechanical Properties Aof Microwave Sintered AA7075/Graphite/SiC Hybrid Composite Fabricated by Powder Metallurgy Techniques, G Manohar, SR Maity, KM Pandey, Silicon, 14, 2022, 5179-5189.
  33. Effect of microwave sintering on the microstructure and mechanical properties of AA7075/B4C/ZrC hybrid nano composite fabricated by powder metallurgy techniques, G Manohar, KM Pandey, SR Maity, Ceramics International, 47(23), 2021, 32610-32618.
  34. Lubricated sliding of CFRPEEK/AlCrN film tribo-pair and its effect on the mechanical properties and structural integrity of the AlCrN film, L. Patnaik, S. R. Maity, S. Kumar, Materials Chemistry and Physics, 273, 2021, 124980.
  35. Evaluation of Gamma irradiated Ti6Al4V and Silver alloyed aC coatings as friction pair via Response Surface Methodology, Patnaik, S. R. Maity, S. Kumar, Advances in Materials and Processing Technologies, 8 (S3), 2022, 1456–1473.
  36. Effect of annealing on structural, mechanical and tribological properties of Cr-(CrN/TiAlN) coating, S Kumar, SR Maity, L Patnaik, Advances in Materials and Processing Technologies, 8 (S3), 2022, 1569–1582.
  37. Optimization of ultrasonic machining (USM) parameters on micro hole drilling of graphene oxide/pineapple leaf filler reinforced epoxy hybrid composite using evaluation based on distance from average solution (EDAS) method, A. Bania, D. Zindani, S.R.Maity, Materials Today: Proceedings, 46(18), 2021, 9089-9091.
  38. Mechanical and Scratch behavior of TiAlN Coated and 3D Printed H13 Tool Steel, S Kumar, SR Maity, L Patnaik, Advances in Materials and Processing Technologies, 8 (S2),2022, 337–351.
  39. Evaluation of Crack resistance and Adhesive Energy of AlCrN and Ag doped a-C Films deposited on Chrome Nitrided 316 LVM Stainless Steel, L. Patnaik, S. R. Maity, S. Kumar, Advances in Materials and Processing Technologies, 8(S3), 2022,1048–1069,
  40. Modeling of Wear Parameters and Multi-Criteria Optimization by Box-Behnken Design of AlCrN Thin Film Against gamma-irradiated Ti6Al4V Counterbody, Patnaik, S. R. Maity, S. Kumar, Ceramics International, 47(14), 2021, 20494-20511.
  41. Extended TODIM Method based on Normal Wiggly Hesitant Fuzzy Sets for deducing Optimal Reinforcement condition of Agro-waste fibers for Green Product development, D. Zindani, S. R. Maity, S. Bhowmik, Journal of Cleaner Production, 301, 2021,
  42. Effect of lubricated sliding wear against CFRPEEK on the nanomechanical properties of Ag alloyed Cr/DLC Thin Film, L. Patnaik, S. R. Maity, S. Kumar, Journal of the Mechanical Behavior of Biomedical Materials, 118, 2021,
  43. Effect of tribological process parameter on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study, S Kumar, SR Maity, L Patnaik, Ceramics International, 47(11), 2021, 16018-16028.
  44. Characterization of Boron Carbide (B4C) particle reinforced aluminium metal matrix composites fabricated by powder metallurgy techniques–A review, G Manohar, KM Pandey, SR Maity, Materials Today: Proceedings, 45(7), 2021, 6882-6888.
  45. Effect of Processing Parameters on Mechanical Properties of Al7175/Boron Carbide (B4C) Composite Fabricated by Powder Metallurgy Techniques, G Manohar, KM Pandey, SR Maity, In Advances in Science and Technology, 105, 2021, 8-16.
  46. Effect of Sintering Mechanisms on Mechanical Properties of AA7075/B4C Composite Fabricated by Powder Metallurgy Techniques, G Manohar, KM Pandey, SR Maity, Ceramics International, 47(11), 2021,1547-15154.
  47. A comparative study on wear behaviors of hot work and cold work tool steel with same hardness under dry sliding tribological test, Kumar, S. R. Maity, L. Patnaik, Materials Today: Proceedings, 44 (1), 2021,949-954.
  48. DLC/CrN or AlCrN/CrN composite films: The better candidate in terms of anti-Wear performance and lesser ion release in hip implant, Patnaik, S. R. Maity, S. Kumar, Materials Today: Proceedings,44 (1), 2021, 1214-1220.
  49. Effect of china clay on mechanical properties of AA7075/B4C hybrid composite fabricated by powder metallurgy techniques, Manohar, K. M. Pandey, S. R. Maity, Materials Today: Proceedings, 9(5), 2020, 9882-9894.
  50. A Concurrent Decision Making Approach towards Uncertainty, Vagueness and Risk Appetite for Sustainable Manufacturing Systems, Zindani, S. R. Maity, S. Bhowmik, Clean Technologies and Environmental Policy, 23(2), 2020, 597-620.
  51. Mechanical and Tribological Assessment of Composite AlCrN or a-C:Ag-based Thin Films for Implant Applications, Patnaik, S. R. Maity, S. Kumar, Ceramics International, 47(5), 2021, 6736-6752.
  52. A Novel Approach to Synthesize Reduced Graphene Oxide (RGO) at Low Thermal Conditions, Das, A. B. Deoghare, S. R. Maity, Arabian Journal for Science and Engineering, 46, 2021, 46:5467–5475.
  53. Mechanical Characterization of Bio-epoxy Green Composites Derived from Sodium Bicarbonate Treated Punica Granatum Short Fiber Agro-waste, D .Zindani, S. Kumar, R. Maity, S. Bhowmik,  Journal of Polymers and the Environment, 29 (1), 2020,143–155.
  54. Complex interval-valued intuitionistic fuzzy TODIM approach and its application to group decision making, Zindani, S. R. Maity, S. Bhowmik, Journal of Ambient Intelligence and Humanized Computing, 24, 2020, 14091–14133.
  55. Punica Granatum Fibers as Potential Reinforcement of Composite Structures, Zindani, S. R. Maity, S. Bhowmik, Fibers and Polymers, 21(7), 2020, 1535-1549.
  56. Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application, Patnaik, S. R. Maity, S. Kumar, Ceramics International, 46(14), 2020, 22805-22818.
  57. Effect of compaction pressure on mechanical properties of AA7075/B4C/graphite hybrid composite fabricated by powder metallurgy techniques, Manohar, K. M. Pandey, S. R. Maity, Materials Today: Proceedings, 38,2021. 2157-2161.
  58. Excogitating Material Rankings Using Novel Aggregation Multiplicative Rule (AMR): A Case for Material Selection Problems, Zindani, S. R. Maity, S. Bhowmik, Arabian Journal for Science and Engineering,45, 2020, 5631–5646.
  59. Friction and tribological behavior of bare nitrided, TiAlN and AlCrN coated MDC-K hot work tool steel, Kumar, S. R. Maity, L. Patnaik, Ceramics International, 46(11), 2020, 17280-17294.
  60. Interval-valued intuitionistic fuzzy TODIM method based on Schweizer–Sklar power aggregation operators and their applications to group decision making, Zindani, S. R. Maity, S. Bhowmik, Soft Computing, 24(18), 2020, 14091-14133.
  61. Decision making tools for optimal material selection: A review, Zindani, S. R. Maity, S. Bhowmik, Journal of Central South University, 27(3), 2020, 629-673.
  62. Microstructure, Tribological Properties, And Hardness Of Spray-Deposited And Warm Rolled Al–Pb Alloys In Peripheral Regions, V.R. Reddy, S.R. Maity, K.M. Pandey, Powder Metallurgy and Metal Ceramics, 58, 2020, 631–641.
  63. Effect of heat treatment and TiN coating on AISI O1 cold work tool steel, Kumar, S. R. Maity, L. Patnaik, Materials Today: Proceedings, 26, 2020, 685-688.
  64. Status of nickel free stainless steel in biomedical field: A review of last 10 years and what else can be done, Patnaik, S. R. Maity, S. Kumar, Materials Today: Proceedings, 26(2), 2020, 638-643.
  65. Exploring the Potential of Graphene as an EMI Shielding Material–An Overview, Das, A. B. Deoghare, S. R. Maity, Materials Today: Proceedings, 22 (4), 2020, 1737-1744.
  66. Aluminium (AA7075) Metal Matrix Composite Reinforced with B4C Nano Particles and Effect of Individual Alloying Elements in Al Fabricated by Powder Metallurgy Techniques, G Manohar, KM Pandey, SR Maity, In Journal of Physics: Conference Series, 1451 (1), 2020, 012024.
  67. Investigation on metallurgical, tribological, hardness properties of spray deposited and warm rolled Al-18Pb, Al-22Pb alloys, B. V. R. Reddy, R. Mittal, S. R. Maity, K.M. Pandey, Journal of Materials Research and Technology, 8(6), 2019, 5687-5697.
  68. Effect of Warm Rolling on Microstructure, Porosity, and Hardness of A Spray-Formed Lm25 Aluminum Alloy, B. V. R. Reddy, S. R. Maity, K.M. Pandey, Materials Physics & Mechanics, 42 (3), 2019, 288-295.
  69. Box-Behnken Analysis of Surface Modification of Aluminium Alloy AA6061 Using Roller Burnishing, S. Kumar, S. R. Maity, L. Patnaik, Materials Today: Proceedings, 18 (7), 2019, 4613–4621.
  70. A Review on Slug Reversal during Punching and Blanking, L. Patnaik, S. R. Maity, S. Kumar, Materials Today: Proceedings, 18 (7), 2019, 2745–2752.
  71. Effect Of Cold Rolling On The Porosity, Hardness Properties Of The Spray Deposited Al-18% Pb And Al-22% Pb Alloys, BVR Reddy, I. Mazumdar, J. Choudhury, Rituraj, K.  Kumar, S.R. Maity, K.M. Pandey, Materials Today: Proceedings, 18 (7), 2019, 3144-3149.
  72. Effect of Warm Rolling on Microstructure, Porosity And Hardness of Spray Formed LM25 Alloy, B.V.R. Reddy, S.R. Maity, K.M. Pandey, Materials Today: Proceedings, 18 (7), 2019, 3910-3915.
  73. Effect of Cold Rolling on Microstructural Properties of Spray Deposited Al-% 18Pb And Al-% 22Pb Alloys, B.V.R. Reddy, I. Mazumdar, S.R. Maity, K.M. Pandey, Materials Today: Proceedings, 18 (7), 2019, 2767-2771.
  74. Laser Beam Micromachining of Metals: A Review, Dhiraj Raj, BVR Reddy, SR Maity, KM Pandey, Materials Today: Proceedings, 18 (1), 2019, 98-103.
  75. Characterization of spray formed Al-alloys—A Review, B. V. R. Reddy, S. R. Maity, K. M. Pandey, Reviews On Advanced Materials Science, 58(1), 2019, 147-158.
  76. A material selection approach using the TODIM (TOmada de Decisao Interativa Multicriterio) method and its analysis, D. Zindani, S. R. Maity, S. Bhowmik, S. Chakraborty, International Journal of Materials Research, 108 (5), 2017, 345-354.
  77. Material Selection of Gear using Grey TOPSIS and COPRAS-G Method, A. Srivastawa, S. R. Maity, K.M. Pandey, International Journal of Biotechnology and Biomedical Sciences, 3(1), 2017,34-38.
  78. Quality function deployment-based expert system for materials selection, K. Prasad, S. R. Maity, S. Chakraborty, International Journal of Materials Science and Engineering, 4 (2), 2016, 80-93.
  79. Tool steel material selection using PROMETHEE II method, S. R. Maity, S. Chakraborty, The International Journal of Advanced Manufacturing Technology, 78 (9-12), 2015, 1537-1547.
  80. Development of an expert system for materials selection, K. Prasad, S. Mahanty, S. R. Maity, S. Chakraborty, Journal of Materials Education, 36(5-6), 2014, 117-138.
  81. A decision making approach for bearing material selection, S. R. Maity, S. Chakraborty, International Journal of Computational Materials Science and Surface Engineering, 5(4), 2013, 289-303.
  82. Grinding wheel abrasive material selection using fuzzy TOPSIS method, S. R. Maity, S. Chakraborty, Material and Manufacturing Process, 28(4), 2013, 408-417.
  83. Non Linear Regression Model of Surface Roughness, S. Dutta, A. Saha, S. R. Maity, International Journal of Mechanical Engineering and Robotics Research, 2(2), 2013, 289-297.
  84. Selection of gear material using compromise ranking method, V. M. Athawale, S. R. Maity, S. Chakraborty, International Journal of Materials and Structural Integrity, 6(2-4), 2012, 257-269.
  85. Supercritical boiler material selection using fuzzy analytic network process, S R. Maity, S Chakraborty, Management Science Letters, 2(4), 2012, 1083-1096.
  86. Turbine blade material selection using fuzzy analytic network process, S. R. Maity, Shankar Chakraborty, International Journal of Materials and Structural Integrity, 6(2-4), 2012, 169-189.
  87. Cutting tool material selection using grey complex proportional assessment method, S. R. Maity, P. Chatterjee, S. Chakraborty, Materials & Design, 36, 2012, 372-378.

NATIONAL JOURNALS

 

  1. A visual decision aid for gear materials selection, S.R. Maity, S Chakraborty, Journal of The Institution of Engineers (India): Series C, 94(3), 2013, 199-212.
  2. Prediction of WEDM performances using clustering techniques in ANFIS during machining of A286 Superalloy, S. Saha, S. R. Maity, S. Dey, Journal of The Institution of Engineers (India): Series C, 104(2), 2023, 315–326.

 INTERNATIONAL CONFERENCES

  1. Comparative Analysis of TODIM and TOPSIS for an Automobile Parts Supplier, R. R.Singh, D. Zindani, S. R Maity, 4th International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2023), Department Mechanical Engineering, NIT Silchar, Assam-788010,3rd -5th  February 2023.
  2. Modeling of laser welding of stainless steel using artificial neural networks, N. Banerjee, A.R. Biswas, M. Kumar, A. Sen, S.R. Maity, International Conference on Recent Advances in Engineering Materials (ICRAEM 2022), Alva’s Institute of Engineering & Technology, Moodbidri, Karnataka, INDIA, 3rd -5th March 2022. Published in Materials Today: Proceedings (2022).
  3. Controlled elitist NSGA-II scheme for Dual-Objective Optimization in WEDM of Inconel 718, S. Saha, S. R. Maity, S. Dey, Second International Conference on Materials and Technologies (Material TECH 2022), NIT Raipur, India, 28th –29th January, 2022.
  4. Using the TODIM method as a multi-criteria decision-making support methodology for an automobile parts manufacturing company, R. R. Singh, S. R Maity, D. Zindani, 2nd International Conference on Engineering Materials, Metallurgy and manufacturing (ICEMMM 20221), Sri Sivasubramaniya Nada (SSN) College of Engineering, Kalavakkam- 603110, 16th-17th December, 2021. Published in Materials Today: Proceedings (2022)
  5. Applications of Laser Beam Welding in Automotive Sector-A Review, A. R. Biswas, N. Banerjee, A Sen, S. R. Maity, 8th International & 29th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2021), Departments of Mechanical Engineering, PSG College of Technology & PSG Institute of Technology and Applied Research, Coimbatore-641062, 9th-11th December, 202.
  6. Modelling of temperature field during the laser cladding of 2024 aluminium alloy for insitu repairing, D. Raj, S. R. Maity, B. Das, 8th International & 29th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2021), PSG College of Technology & PSG Institute of Technology and Applied Research, Coimbatore-641062, 9th-11th December, 2021.
  7. Application of MOORA method in a multi-criteria decision-making problem of an automobile parts manufacturing company, R. R. Singh, S. R. Maity, D. Zindani, 8th International & 29th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2021), PSG College of Technology & PSG Institute of Technology and Applied Research, Coimbatore-641062, 9th -11th December, 2021.
  8. Comparative analysis of metaheuristic optimization algorithms in micro-EDM process, S.Saha, S.R.Maity, S. Dey, 2nd International Conference on Industrial and Manufacturing Systems (CIMS 2021), Department of Production and Industrial Engineering, Punjab Engineering College, Chandigarh &Department of Industrial and Production Engineering, Dr. B.R. Ambedkar National Institute of Technology Jalandhar, 11th –13th November, 2021.
  9. Mechanical and Scratch Behavior of TiAlN Coated and 3D Printed H13 Tool Steel, S. Kumar, S. R. Maity, L. Patnaik, 12th International Conference on Materials Processing and Characterization (ICMPC 2021), National Institute of Technical Teachers Training and Research, Chandigarh-160019, 6th-9th October, 2021.
  10. Effect of Annealing on Structural, Mechanical and Tribological Properties of Cr-(CrN/TiAlN) coating, S. Kumar, S. R. Maity, L. Patnaik, 12th International Conference on Materials Processing and Characterization (ICMPC 2021), National Institute of Technical Teachers Training and Research, Chandigarh-160019, 6th-9th October, 2021.
  11. Scratch Resistance and Adhesive Energy of AlCrN and Ag doped a-C Films Deposited on Chrome Nitrided 316 LVM Stainless Steel, L. Patnaik, S. R. Maity, S. Kumar, 12th International Conference on Materials Processing and Characterization (ICMPC 2021), National Institute of Technical Teachers Training and Research, Chandigarh-160019, 6th-9th October, 2021.
  12. Evaluation of Gamma irradiated Ti6Al4V and Silver alloyed a-C coatings as friction pairs via Response Surface Methodology, L. Patnaik, S. R. Maity, S. Kumar, 12th International Conference on Materials Processing and Characterization (ICMPC 2021), National Institute of Technical Teachers Training and Research, Chandigarh-160019, 6th-9th October, 2021.
  13. Particle swarm optimization based search for optimal machining parameters of A286 superalloy in WEDM operation, S. Saha, S. R. Maity, S. Dey, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th  February, 2021.
  14. Investigation of temperature distribution in low power laser cladding of nickel through numerical analysis, D. Raj, S. R. Maity, Bipul Das, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th  February, 2021.
  15. Dock detection for an underwater autonomous vehicle using deep learning in a simulated environment, S. Jena, S.R. Maity, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2021.
  16. Stochastic first-ply failure analysis of laminated composite plate- a moving least square approach, S. Kushari, S.R. Maity, A. Chakraborty, S. Dey, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2021.
  17. Effect of different surface modification on nanomechanical and wear properties of cold work tool steel: an experimental investigation, S. Kumar, S.R.Maity, L. Patnaik, 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th -9th February, 2021.
  18. Parametric optimization of tribological process parameters and their comparative effect on wear responses of TiCrN coated cold work tool steel, S. Kumar, S. R. Maity, L. Patnaik. 2nd International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2021), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th -9th February, 2021.
  19. A comparative study on wear behaviors of hot work and cold work toolsteel with same hardness under dry sliding tribological test, S. Kumar, S. R. Maity, L. Patnaik. 10th International Conference on Materials Processing and Characterization (ICMPC-2020), IIT Indor, Madhya Pradesh, 15th -17th December, 2020.
  20. DLC/CrN or AlCrN/CrN composite films: The better candidate in terms ofanti-Wear performance and lesser ion release in hip implant, L. Patnaik, S. R. Maity, S. Kumar. 10th International Conference on Materials Processing and Characterization (ICMPC-2020), IIT Indor, Madhya Pradesh, 15th -17th December, 2020.
  21. Structural and Corrosion Study of a-C Film with Ti, Cr and Ni Interlayers, L. Patnaik, S. R. Maity, S. Kumar. National Conference on Physics and Chemistry of Materials (NCPCM-2020), IIT Indor, Madhya Pradesh, 15th -17th December, 2020.
  22. Relation Between Mechanical and Tribological Properties of Plasma Nitrided and TiCrN Coated YXR-7 Tool Steel, S. Kumar, S. R. Maity, L. Patnaik. National Conference on Physics and Chemistry of Materials (NCPCM-2020), IIT Indor, Madhya Pradesh, 15th -17th December, 2020.
  23. Effect of compaction pressure on mechanical properties of AA7075/B4C/graphite hybrid composite fabricated by powder metallurgy Techniques, G. Manohar, K. M. Pandey, S.R. Maity. International Conference & Exposition on Mechanical, Material and Manufacturing Technology (ICE3MT-2020), Hyderabad, Telangana, 9th 10th October, 2020.
  24. Effect of china clay on mechanical properties of aa7075/b4c hybrid composite fabricated by powder metallurgy techniques. G. Manohar, K. M. Pandey, S.R. Maity, International Conference on Mechanical, Electronics and Computer Engineering (ICEMECE 2020), Kancheepuram, Tamilnadu, August, 2020.
  25. Characterization of boron carbide (b4c) particle reinforced aluminium metal matrix composites fabricated by powder metallurgy techniques – A review, International Conference on Mechanical, Electronics and Computer Engineering (ICEMECE 2020), Kancheepuram, Tamilnadu, August, 2020.
  26. Effect of Processing Parameters on Mechanical Properties of Al7175/Boron Carbide (B4C) Composite Fabricated by Powder Metallurgy Techniques, G. Manohar, K.M. Pandey, S.R. Maity. International Conference on Materials, Computer Engineering and Education Technology (MCEET-2020), Sanya, China 19th-20th December, 2020.
  27. Probing predictability of random first ply failure load of composite plates, S. Kushari, A. Chakraborty, S. R. Maity, S. Dey, Indian Society of Theoritical and Applied Mechanics (ISTAM 2020) conference, Gandhi Institute of Technology & Management (GITAM), Hyderabad, Telangana, 9th-11th December, 2020.
  28. Application of Box-Behnken Method for Multi-Response Optimization of Turning Parameters for DAC-10 Hot Work Tool Steel, Kumar, S. R. Maity, L. Patnaik , 1st International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2020), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2020.
  29. Identification of parameters for Ultrasonic Machining (USM) on drilling of graphene oxide/pineapple leaf filler reinforced epoxy hybrid composite using TODIM Method, A.Bania, S. R. Maity, 1st International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2020), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2020.
  30. Experimental investigation of dimensional deviation of square punches cut by wire EDM of A286 superalloy, S. Saha, S. R. Maity, S. Dey, 1st International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2020), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2020.
  31. Preheating path selection through numerical analysis of laser aided direct metal deposition, D. Raj, B. Das, S. R. Maity, 1st International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2020), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2020.
  32. Effect of sintering temperatures on mechanical properties of aa7075/b4c/graphite hybrid composite fabricated by powder metallurgy techniques. G. Manohar, K.M. Pandey, S.R. Maity. 1st International Conference on Recent Advancements in Mechanical Engineering (ICRAME 2020), Department Mechanical Engineering, NIT Silchar, Assam-788010,7th-9th February, 2020.
  33. Effect of Pre Heat Treatment of Boron carbide Reinforcements on Mechanical Properties of AA7075/B4C Composite Fabricated by Powder Metallurgy Techniques. G. Manohar, K.M. Pandey, S.R. Maity. ICAMSME-2020, Nellore, Andhra Pradesh, February, 2020.
  34. Aluminium (AA7075) Metal Matrix Composite Reinforced with B4C Nano Particles and Effect of Individual Alloying Elements in Al Fabricated by Powder Metallurgy Techniques. G. Manohar, K.M. Pandey, S.R. Maity ICAPPM-2020, Hyderabad, Telangana, January, 2020.
  35. Parametric optimization of turning process parameters on surface roughness and tool wear rate of biomedical grade stainless steel 316LVM against AlCrN coated tool, L. Patnaik, E.Tripathi, S.R. Maity, S. Kumar, International Conference on Precision, Meso, Micro&Nano Engineering (COPEN 2019), Indor, IIT Indor, Madhya Pradesh,12th 14th December, 2019.
  36. Optimization of Ultrasonic Machining (USM) parameters on micro hole drilling of graphene oxide/pineapple leaf filler reinforced epoxy hybrid composite using Evaluation Based on Distance from Average Solution (EDAS) Method, A. Bania, D. Zindani, S. R. Maity, International Conference on Advanced Trends in Mechanical and Aerospace Engineering (ATMA-2019), Dayananda Sagar University, School of Engineering, Bengaluru, India, 2019.
  37. ANN-based random first-ply failure analyses of laminated composite plates, S. Kushari, A. Chakraborty, T. Mukhopadhyay, S.R. Maity, S. Dey, 7th International Congress on Computational Mechanics and Simulation (ICCMS-2019), IIT Mandi, India, 11th-13th December, 2019.
  38. Study the influence of thickness reduction and Pb content on the hardness of spray deposited Al-6Si alloy using linear regression analysis, 12th International Conference on Sustainable Energy & Environmental Protection University of Sharjah (SEEP-2019), Dubai, UAE, 18th-21st November, 2019.
  39. Shape and Wear behavior of the spray deposited and warm rolled Al-Si-Pb alloys, V. R. Reddy, S. R. Maity, K. M. Pandey, 12th International Conference on Sustainable Energy & Environmental Protection University of Sharjah (SEEP-2019) , Dubai, UAE, 18th-21st  November, 2019.
  40. Effect of Processing Parameters on Mechanical Properties of Al7175/Boron Carbide (B4C) Composite Fabricated by Powder Metallurgy Techniques, G. Manohar, K.M Pandey, S.R. Maity, International Conference on Materials and Applied Science (ICME-2019), Warangal, Hotel Haritha Kakatiya, Telangana, 2019.
  41. Selection of material for wind turbine blade using PROMETHEE-GAIA method, D. Zindani, S. R. Maity, S. Bhowmik, AIP Conference Proceedings, 1998, 2018, 020008 (1-6).
  42. Fabrication of metal matrix composites by powder metallurgy: A review, G. Manohar, A. Dey, K.M. Pandey, S.R. Maity, AIP Conference Proceedings, 1952, 2018, 020041 (1-8).
  43. Conceptualization and Development of Machining Fixture for Machining in Crankcase Cylinder, L. Patnaik, S.R. Maity, Kumar, International Conference on Recent Innovations and Developments in Mechanical Engineering, NIT Meghalaya, Shillong, 2018.
  44. A Decision Making Approach for Selection of Rapid Prototyping Process using MACBETH Method, B. K. Mandal and S. R. Maity, International Conference on “Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness, Birla Institute of Technology, Mesra, Ranchi, 2016.
  45. Spring material selection using PROMETHE-GAIA Method, S. R. Maity, S. Chakraborty, 4th International & 25th All India Manufacturing Technology Design and Research (AIMTDR-2012), Department of Production Engineering, Jadavpur University, Kolkata, 14th -16th December,
  46. Turbine Blade Material Selection using Fuzzy TOPSIS Method, S. R. Maity, S. Chakraborty, 5th International Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, 2011.

NATIONAL CONFERENCE

  1. Fabrication of metal matrix composites by powder metallurgy: A review, G. Manohar, A. Dey, K.M. Pandey, S.R. Maity, AIP Conference Proceedings, 1952, 2018, 020041 (1-8).
  2. Selection of material for wind turbine blade using PROMETHEE-GAIA method, D. Zindani, S. R. Maity, S. Bhowmik, AIP Conference Proceedings, 1998, 2018, 020008 (1-6).

WORKSHOP

Sl. No. Date (s) Conference/Program Organized & Role Organization/Venue
01 17th to 21st October, 2016 Workshop on Advanced Joining Technologies, Coordinator NIT Silchar
02 16th to 20th August, 2018 Workshop on Computational Technologies, Coordinator NIT Silchar

CONFERENCE ORGANIZED

PH.D. SCHOLARS

1 Dr. Divya Zindani Prospect Theory based Decision-Making Approaches for Green and Sustainable Technologies: A Material Selection Perspective Jointly with Prof. K.M. Pandey Completed 2021
2 Dr. B.V.R. Reddy Investigation on Metallurgical Mechanical and Tribological Properties of Spray Deposited and Warm Rolled Al -Alloys Jointly with Dr. S. Bhowmik Completed 2021
3 Dr.Guttikonda Manohar Investigation on Microstructural and Mechanical Properties of AA7075/B4C/ZrC Hybrid Nanocomposite Fabricated by Powder Metallurgy Techniques Jointly with Prof. K.M. Pandey Completed 2022
4 Dr. Papari Das Development of Graphene based Polymer Composites for Efficient Electromagnetic Interference (EMI) Shielding Jointly with Dr. A.B. Deoghare Completed 2022
5 Dr. Lokeswar Patnaik Experimental investigation of mechanical properties and anti-wear performance of Ag/Si doped a -C and AlCr(Si)N thin film coatings for biomedical application Sole Guidance Completed 2023
6 Dr.Sunil Kumar An investigation on surface modification of hot work and cold work tool steels using plasma nitriding and thin film deposition for tooling applications Sole Guidance Completed 2023
7 Mr. Subhankar Saha Probabilistic Assessment and performance optimization of Wire-EDM of Inconel and A286 Alloys Jointly with Dr. S. Dey Completed 2023
8 Mr. Dhiraj Raj Laser aided Direct Metal Deposition for in-situ Repairing of Turbine Blades Jointly with Dr. B. Das Ongoing
9 Mr. Rishav Raj Singh Supplier Evaluation for Sustainable Technologies using Fuzzy-Prospect Theory Sole Guidance Ongoing
10 Mr. Nirvik Banerjee(Part Time) Study on Solid State Laser Welding of Light Alloys to Composite Sole Guidance Ongoing
11 Mr. Amit Ratan Biswas(Part Time) Mechanical and Metallurgical Properties of Solid State Laser Welding of Austenitic stainless to Non-Ferrous alloy Sole Guidance Ongoing

M.TECH. SCHOLARS

Sl. No. Name of the Student Title of the Dissertation Nature of Guidance Year of Award
1. Mr. Devendra Kumar Sonkar (20-26-222) Performance Assessment of NAB alloy in WEDM of Complex Profile using Zinc Coated Brass Wire Jointly with Dr. S. Dey 2022
2 Mr. Syed Mahammad Shafi (20-26-211) Microstructural make-up and morphology of Hydroxyapatite film with Si-doped TiN Interlayer Sole Guidance 2022
3. Mr. Dev Datt Pathak (19-26-209) Vibration Analysis of Cracked Cantilever Beam using Response Surface Methodology Sole Guidance 2021
4. Mr.Sandeep Kumar Pandey (18-22-403) Microstructural characteristics and porosity behavior of spray formed and high reduction of rolled Al-6Si-25Pb. Sole Guidance 2020
5. Mr.Angkan Bania(18-22-211) Identification of Ultrasonic machining parameters on drilling of grapheme oxide/pineapple leaf filler reinforced epoxy hybrid composite. Sole Guidance 2020
6. Mr. Ishwar Mazumder(17-22-405) Investigating Metallurgical Behaviour of Spray Formed Rolled Aluminium and Lead Alloys Jointly with Prof. K.M. Pandey 2019
7. Mr. Md Zishan Ahmad Khan(17-22-406) Ultrasonic Machinability of Graphene Reinforced Epoxy Nano Composite Sole Guidance 2019
8. Mr. Pankaj Kumar Shahu (16-22-405) Machining Performance Evaluation of Al6061T6 using Abrasive Water Jet Process Sole Guidance 2018
9. Mr. Guttikonda Manohar(16-22-406) Experimental Study on Mechanical Properties of AA7075/B4C Nano Composites Fabricated by Powder Metallurgy Techniques Jointly with Prof. K.M. Pandey 2018
10 Mr. Dhiraj Raj(16-22-409) Experimental Study on Properties of cold rolled Al-12Si alloy Fabricated by Spray Forming Jointly with Prof. K.M. Pandey 2018
11 Mr. Bablu Kumar Mondal(15-22-305) Application of Decision-Making Methods for Selection of Advanced Manufacturing Systems Sole Guidance 2017
12 Mr. Lakshman Kumar(15-22-401) Parametric Optimization of Abrasive Water Jet Machining Process using Firefly and Bat Algorithms- A Comparative Study Sole Guidance 2017
13 Mr. Aditya Srivastava (15-22-309) Decision-Making Frameworks for Material Selection and its Analysis Jointly with Prof. K.M. Pandey 2017

B.TECH. SCHOLARS

Sl. No. Name of the Student Title of the Dissertation Year of Award
1. Rishabh Mishra (19-1-6-021)Nilotpal Roy (19-1-6-071)Anit Bhattacharya (19-1-6-079)Vibhum Pandey (19-1-6-080) Vibrational Analysis of Cracked Cantilever Beam under Harmonic Response using Taguchi Response Surface Methodology 2023
2 Shubham Bagri (14-1-2-114) Material Selection and Design of Spur Gear 2022
3 Neelotpal Kashyap (18-1-2-053)Dhrubajoyti Das(18-1-2-054)Prashil Vilas Wairagade (18-1-2-057) Static and Dynamic Analysis of Deep Groove Ball Bearing for Optimal Performance using Different Materials in ANSYS FEA 2022
4 Debopriyo Roy (15-1-2-008),Pinkal Patar (15-1-2-012),Mukta Basumatary (15-1-2-051) Modeling Transient Liquid Phase Diffusion Bonding Process using COMSOL multi-physics Software 2019
5 Chaitanya Chandolin (15-1-2-017)Shekhar Joyti Nath (15-1-2-021)Dipjyoti Mazumder (15-1-2-026) Design and Analysis of Five Stage Progressive Tool for End Plate of SMPS 2019
6 Dev Manas (14-1-2-027)Vaibhav Khatri (14-1-2-031) A Material Selection Approach for CAM Using Multi-criteria Decision Making Method 2018
7 Arindom Borkakoti (14-1-2-090)Aakash Deep Das (14-1-2-100)Beni Jewela Doley (14-1-2-112) Pattern Material Selection for Sand Casting using Fuzzy AHP and CODAS 2018
8 Ayan Chakraborty (13-1-2-084)Rahul (13-1-2-060)Sudheer Kumar Rai (13-1-2-095) Parametric Optimization of Ultrasonic Machining using Genetic Algorithm, Simulated Annealing and Particle Swarm Optimization 2017
9 Rimo Dey (13-1-2-055)Sunsuma Boro (13-1-2-057)Adityaman Patra (13-1-2-074) Decision Making Approaches for Material Selection of Guide Vanes and Runner Blades in Small Hydropower Plant 2017