Prof. K.M. Pandey

kmp

Professor (HAG)
Phone: +91-9435173130
Email: kmpandey[at]mech[dot]nits[dot]ac[dot]in|
Date of Joining: 06/01/1987
Academic/Industrial Experience: 35+ years
Google Scholar: Click Here

 

 

ACADEMIC QUALIFICATIONS (FULL DETAILS )

  • B. Tech. (Mechanical Engg) BHUIT, Varanasi(1980)
  • M. Tech. (Heat Power) BHUIT, Varanasi(1987)
  • Ph.D.  (Mechanical Engg) IIT Kanpur (1994)
  • Download CV

 

AREA OF INTEREST AND SPECIALIZATION (INCLUDING RESEARCH AREA)

  • Internal Combustion Engines
  • Turbo Machines
  • Gas Dynamics
  • Research methodology

SHORT BIOGRAPHICAL SKETCH

Prof. K.M. Pandey obtained his B.Tech in Mechanical Engineering from BHUIT, Varanasi in 1980. Dr. Pandey also did M.Tech in Heat Power from the same Institute in 1987. Prior to Joining REC Silchar Dr. Pandey served in BIT Mesra Ranchi as Associate Lecturer for a period of 3 Years and 6 Months. Dr. Pandey did his PhD in Mechanical Engineering in 1994 from IIT Kanpur. He has published and presented more than 425 papers in International & National Journals and Conferences. Dr. Pandey has also served in Colombo Plan Staff College Manila, Philippines in the year 2002 as Faculty Consultant seconded by Govt. of India. Currently he is working as Professor of the Mechanical. Engineering Department, National Institute of Technology, Silchar, Assam, India. He also served the department in the capacity of head from July 07 to 13 July 2010. He has also worked as faculty consultant in Colombo Plan Staff College, Manila, Philippines as seconded faculty from Government of India in the year 2002. His research interest areas are the following; Combustion, High Speed Flows, Technical Education, Fuzzy Logic and Neural Networks , Heat Transfer, Internal Combustion Engines, Human Resource Management, Gas Dynamics and Numerical Simulations in CFD area from Commercial Softwares. Dr. Pnadey has got 36 SCI indexed journal papers and in total 93 research articles are indexed in Scopus.

PATENT(S)

EDITORSHIP

BOOKS

SUBJECTS TAUGHT (INCLUDING SUBJECTS CURRENTLY TEACHING)

MEMBER

AWARDS & RECOGNITIONS

 

ADMINISTRATIVE RESPONSIBILITY

 

SERVED AS TPC

 

MANUSCRIPT REVIEWED FROM

 

INTERNATIONAL JOURNALS

  1. Alam, N., Sharma, K.K. and Pandey, K.M., 2019. Numerical investigation of flame propagation in pulse detonation engine with variation of obstacle clearance. Journal of Thermal Analysis and Calorimetry, pp.1-11.
  2. Saurabh Tripathi, Krishna Murari Pandey , Pitambar Randive. Computational Study on Effect of Obstacles in Pulse Detonation Engine .International Journal of Engineering & Technology, 7 (4.5) (2018) 113-117
  3. Lakka SuneethaPitambar RandiveK.M. Pande, Numerical investigation on implication of dualcavity on combustion characteristics in strut basedscramjet combustor, Article in press in International Journal of Hydriogen Energy.
  4. Suneetha, L., Randive, P. and Pandey, K.M., 2019. Advances in flame stabilization process on a dual mode scramjet-A Review. Materials Today: Proceedings, 18, pp.104-108.
  5. Suneetha, L., Randive, P. and Pandey, K.M., 2019. Numerical investigation on influence of diamond shaped strut on the performance of a scramjet combustor. International Journal of Hydrogen Energy, 44(13), pp.6949-6964.
  6. Raj, Dhiraj, B. V. R. Reddy, S. R. Maity, and K. M. Pandey. “Laser Beam Micromachining of Metals: A Review.” Materials Today: Proceedings 18 (2019): 98-103
  7. Effect Of Cold Rolling On Microstructural Properties Of Spray Deposited Al-%18Pb And Al-%22Pb Alloys, Bandi Venkata Ramana Reddy, Saikat Ranjan Maity, and Krishna Murari Pandey, Materials today proceedings (accepted for publication ) (Scopus indexed)
  8. Effect of cold rolling on porosity ,hardness properties of The spray deposited Al-18%Pb And Al-22%Pb Alloys, Bandi Venkata Ramana Reddy, Saikat Ranjan Maity, and Krishna Murari Pandey, Materials today proceedings (accepted for publication ) (Scopus indexed)
  9. Kummitha, O.R., Pandey, K.M. and Gupta, R., 2018. Numerical analysis of hydrogen fueled scramjet combustor with innovative designs of strut injector. International Journal of Hydrogen Energy.
  10. Chatterjee, S., Acharya, J. and PANDEY, K.M., 2018. Degradation of aerodynamic performances of two typical aerofoils under heavy rain: A comparative study using CFD simulation. European Journal of Electrical Engineering, 20(3), p.325.
  11. Yadav, S. and Pandey, K.M., 2018. A Parametric Thermal Analysis of Triangular Fins for Improved Heat Transfer in Forced Convection. Strojniski Vestnik/Journal of Mechanical Engineering, 64(6).
  12. Kummitha, O.R., Pandey, K.M. and Gupta, R., 2018. CFD analysis of a scramjet combustor with cavity based flame holders. Acta Astronautica, 144, pp.244-253.
  13. Choubey, G. and Pandey, K.M., 2018. Effect of different wall injection schemes on the flow-field of hydrogen fuelled strut-based scramjet combustor. Acta Astronautica, 145, pp.93-104.
  14. Choubey, G. and Pandey, K.M., 2018. Effect of variation of inlet boundary conditions on the combustion flow-field of a typical double cavity scramjet combustor. International journal of hydrogen energy, 43(16), pp.8139-8151.
  15. Jaiswal, S., Deoghare, A.B. and Pandey, K.M., 2018, January. Mass concentration analysis of aerosol through human airways. In 2018 2nd International Conference on Inventive Systems and Control (ICISC) (pp. 334-338). IEEE.
  16. Dey, A. and Pandey, K.M., 2018. Wire electrical discharge machining characteristics of AA6061/cenosphere as-cast aluminum matrix composites. Materials and Manufacturing Processes, 33(12), pp.1346-1353.
  17. Sharma, D. and Pandey, K.M., 2018. Review on using nanofluids for heat transfer enhancement in nuclear power plants. Kerntechnik, 83(5), pp.426-438.
  18. Dey, A. and Pandey, K.M., 2018. Selection of optimal processing condition during WEDM of compocasted AA6061/cenosphere AMCs based on grey-based hybrid approach. Materials and Manufacturing Processes, 33(14), pp.1549-1558
  19. Kummitha, O.R., Pandey, K.M. and Gupta, R., 2018. Optimization of scramjet performance with different fuel injection techniques and flame holder cavities. Acta Astronautica, 152, pp.908-919.
  20. Dey, A. and Pandey, K.M., 2018. Wear behaviour of Mg alloys and their composites–a review. International Journal of Materials Research, 109(11), pp.1050-1070.
  21. Dey, A. and Pandey, K.M., 2018. Wear behaviour of Mg alloys and their composites–a review. International Journal of Materials Research, 109(11), pp.1050-1070.
  22. Rahman, M., Dey, A. and Pandey, K.M., 2018. Machinability of cenosphere particulate–reinforced AA6061 aluminium alloy prepared by compocasting. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(14), pp.2499-2509.
  23. Debnath, S., Das, B., Randive, P.R. and Pandey, K.M., 2018. Performance analysis of solar air collector in the climatic condition of North Eastern India. Energy, 165, pp.281-298.
  24. Roy, B., Misra, R.D., Pandey, K.M., Sinha, A. and Deb, B., 2019. Computational and experimental study of swirl flow within SI engine with modified shrouded intake valve. Progress in Computational Fluid Dynamics, an International Journal, 19(2), pp.123-136.
  25. Reddy, B.V.R., Mittal, R., Maity, S.R. and Pandey, K.M., 2019. Investigation on metallurgical, tribological, hardness properties of spray deposited and warm rolled Al-18Pb, Al-22Pb alloys. Journal of Materials Research and Technology.
  26. Alam, N., Pandey, K.M. and Sharma, K.K., 2019. Numerical investigation of combustion wave propagation in obstructed channel of pulse detonation engine using kerosene and butane fuels. J Appl Fluid Mech, 12(3), pp.883-890.
  27. Reddy, B.V.R., Maity, S.R. and Pandey, K.M., 2019. Characterization of spray formed Al-alloys—A Review. REVIEWS ON ADVANCED MATERIALS SCIENCE, 58(1), pp.147-158.
  28. Reddy, B.V.R., Maity, S.R. and Pandey, K.M., 2019. EFFECT OF WARM ROLLING ON MICROSTRUCTURE, POROSITY, AND HARDNESS OF A SPRAY-FORMED LM25 ALUMINUM ALLOY. Materials Physics & Mechanics, 42(3).
  29. Kumar, R.R., Mukhopadhyay, T., Pandey, K.M. and Dey, S., 2019. Stochastic buckling analysis of sandwich plates: The importance of higher order modes. International Journal of Mechanical Sciences, 152, pp.630-643.
  30. Suneetha, L., Randive, P. and Pandey, K.M., 2019. Numerical investigation on influence of diamond shaped strut on the performance of a scramjet combustor. International Journal of Hydrogen Energy, 44(13), pp.6949-6964.
  31. Roy, B., Misra, R.D., Pandey, K.M., Deb, B. and Singh, A.K., 2019. Effect of modified shrouded intake valve on performance and emissions of spark ignition engine. Clean Technologies and Environmental Policy, 21(3), pp.547-563.
  32. Alam, N., Sharma, K.K. and Pandey, K.M., 2019. Combustion characteristics of hydrogen-air mixture in pulse detonation engines. Journal of Mechanical Science and Technology, 33(5), pp.2451-2457.
  33. Choubey, G., Devarajan, Y., Huang, W., Mehar, K., Tiwari, M. and Pandey, K.M., 2019. Recent advances in cavity-based scramjet engine-a brief review. International Journal of Hydrogen Energy.
  34. Suneetha, L., Randive, P. and Pandey, K.M., 2019. Numerical investigation on mixing behavior of fuels inreacting and non-reacting flow condition of a cavity-strut based scramjet combustor. International Journal of Hydrogen Energy, 44(31), pp.16718-16734
  35. Kumar, R.R., Pandey, K.M. and Dey, S., 2019. Probabilistic assessment on buckling behavior of sandwich panel:-A radial basis function approach. Structural Engineering and Mechanics, 71(2), pp.197-210.
  36. Kumar, R.R., Karsh, P.K., Vaishali, Pandey, K.M., Dey, S. Stochastic natural frequency analysis of skewed sandwich plates. Engineering Computations (Swansea, Wales) Volume 36, Issue 7, 12 August 2019, Pages 2179-2199
  37. Sahu, M.K., Pandey, K.M. & Chatterjee, S. Heat Mass Transfer (2019) 55: 2889. https://doi.org/10.1007/s00231-019-02630-0
  38. Kumar R.R., Pandey K.M., Dey S. (2020) Stochastic Free Vibration Analysis of Sandwich Plates: A Radial Basis Function Approach. In: Varde P., Prakash R., Vinod G. (eds) Reliability, Safety and Hazard Assessment for Risk-Based Technologies. Lecture Notes in Mechanical Engineering. Springer, Singapore
  39. Alam, N., Sharma, K.K. & Pandey, K.M. J Braz. Soc. Mech. Sci. Eng. (2019) 41: 502. https://doi.org/10.1007/s40430-019-2024-0
  40. Ravi Ranjan Kumar and Prof. K. M. Pandey, Static Structural and Modal Analysis of Gas Turbine Blade, 2017 IOP Conf. Ser.: Mater. Sci. Eng. 225-012102 (Indexed in Scopus)
  41. Saroj Yadav and K M Pandey, A Comparative Thermal Analysis of Pin Fins for Improved Heat Transfer in Forced Convection, Materials Today: Proceedings 5 (2018) 1711–1717.
  42. Pinku Debnath, K M Pandey, “Computational Study of Deflagration to Detonation Transition in Pulse Detonation Engine Using Shchelkin Spiral”, Applied Mechanics and Materials, Trans Tech publications Switzerland. Volume 772, pp.136-140, (2015), (Indexed in Thomson Reuters and Scopus), (DOI-10.4028/www.scientific.net/AMM.772.136)
  43. Krishna M. Pandey, Ritabrata Thakur, AbhinavHazarika, TarunAshutosh, DipankarGogoi, Non-Newtonian Computational Fluid Dynamics (CFD) Modeling on Left Coronary Artery with Multiple Blockages, Applied Mechanics and Materials, Trans Tech publications Switzerland. Volume 592-594, pp.1924-1929, (2014) (Indexed in Thomson Reuters and Scopus), (DOI-10.4028/www.scientific.net/AMM.592-594.1924).
  44. M.Pandey and S.Roga, “CFD Analysis of Scramjet Combustor with Non-Premixed Turbulence Model Using Ramp Injector,” Applied Mechanics and Materials, Transtech publications Switzerland, Volume 555, pp.18-25, (2014) (Indexed in Thomson Reuters and Scopus). (DOI- 10.4028/www.scientific.net/AMM.555.18)
  45. K M Pandey, AbhijitDey and P.L.Choudhury, “Buckling Behaviour of Circular Ring Stiffened Filament Wound Composite Pressure Hull through Finite Element Analysis”, Applied Mechanics and Materials, Trans Tech publications Switzerland. volume 656, pp.288-297,(2014).(Indexed in Thomson Reuters and Scopus), (DOI-10.4028/www.scientific.net/AMM.656.288)
  46. PinkuDebnath, K M Pandey, “Effect of Blockage Ratio on Detonation Flame Acceleration In Pulse Detonation Combustor Using CFD” Applied Mechanics and Materials, Trans Tech publications Switzerland. Volume 656, pp.64-71.2014 (Indexed in Thomson Reuters and Scopus), (DOI-10.4028/www.scientific.net/AMM.656.64)
  47. M. Pandey and S. Roga, “CFD Analysis of Hypersonic Combustion of H2-Fueled Scramjet Combustor with Cavity Based Fuel Injector at Flight Mach 6,” Applied Mechanics and Materials, Trans Tech publications Switzerland. Volume 656, pp53-63,(2014). (Indexed in Thomson Reuters and Scopus), (DOI-10.4028/www.scientific.net/AMM.656.53)
  48. Pannalal Choudhury, Subhankar Das, Sudipta Halder & Krishna Murari Pandey, Free edge mixed mode delamination analysis of laminated composites with wrap-around configuration-A Finite Element Study, Published in Journal of Institution of Engineers, Series D, Dec 2015, pp 1-11. DOI-10.107/s40033-015-0099-z
  49. Gautam Choubey, K. M Pandey, Ambarish Maji, Tuhin Deshmukhya, Ajoy Debbarma, Computational Investigation of Multi-Strut Injection of Hydrogen in a Scramjet Combustor,. Materials today proceedings, Volume 4, Issue 2, Part A, 2017, Pages 2608–2614. https://doi.org/10.1016/j.matpr.2017.02.115
  50. Deepak Sharma, K.M. Pandey, C. Chandrashekhar A Pratap, Computational Study of Effect of Varying Properties of Carbon Dioxide on Convective Heat Transfer in Sub Channels Flow at a Pressure Just Above the Critical Value, Materials today proceedings, Volume 4, Issue 2, Part A, 2017, Pages 1293–1302, https://doi.org/10.1016/j.matpr.2017.01.150
  51. Debbarma and K.M. Pandey, CFD Analysis of Rewetting Temperature and Wetting Delay during Emergency Cooling of Vertical Nuclear Fuel Rod Bundle with Water Jet Impingement, Materials today proceedings, Volume 4, Issue 2, Part B, 2017, Pages 4144–4152, https://doi.org/10.1016/j.matpr.2017.02.117
  52. Debbarma and K.M. Pandey, “CFD Study on Emergency Core Cooling of Hot Vertical Nuclear Fuel Rod Bundle by Jet Impingement”, Materials today proceedings, Volume 4, Issue 2, Part A, 2017, Pages 2534–2543, https://doi.org/10.1016/j.matpr.2017.02.107
  53. Obula Reddy and K.M. Pandey, Experimental and numerical analysis of forced convection heat transfer in turbulent flow, Procedia Engineering 127 ( 2015 ) 711 – 718, Elsevier Publications, doi: 10.1016/j.proeng.2015.11.375
  54. Ajoy Debbarma, K.M Pandey, Numerical Analysis of Flow and Heat transfer in Sub-channel of Supercritical Water Reactor, Procedia Engineering, Volume64, pp..507-517, 2013 Elsevier Publications, (DOI- 10.1016/j.proeng.2013.09.125)
  55. K M Pandey, Pinku Debnath, Review on recent advances in Pulse detonation engines, published in Journal of combustion, Hindwai publication (Scopus indexed and indexed in Thomson Reuters) Hindawi Publishing CorporationJournal of Combustion, Volume 2016, Article ID 4193034, 16 pages, http://dx.doi.org/10.1155/2016/4193034.
  56. Ajoy Debbarma and Krishna Murari Pandey,CFD Study of Rewetting Nuclear Fuel Rod Bundle by Zig-Zag Jet Impingement, Indian Journal of Science and Technology, Vol 9(16), DOI: 10.17485/ijst/2016/v9i16/92572, April 2016.
  57. Deepak Sharma and K. M. Pandey, “Numerical Investigation of Heat Transfer Characteristics in Triangular Channel in Light Water Nuclear Reactor by using CuO-Water based Nanofluids”, Indian Journal of Science and Technology, Vol 9(16), DOI: 10.17485/ijst/2016/v9i16/92574, April 2016.
  58. Abhijit Dey and K.M.Pandey, Wire Electrical Discharge Machining Characteristics of AA6061/Cenosphere As-Cast Aluminium Matrix Composites, accepted in Materials and Manufacturing Processes, Taylor and Francis Publications https://doi.org/10.1080/10426914.2017.1388517
  59. Pannalal Choudhury, Sudipta Hasder, Nazrul Islam Khan,Jialai Wang and Krishna Murari Pandey, Enhanced creck suppression ability of hybrid glass fiber reinforced laminated composites fabricated using GNP/epoxy system by optimised UDM parameters, Ultrasonics –Sonochemistry, 39 (2017)174-187.
  60. Mujibur Rahman, Abhijit Dey and Krishna Murari Pandey, “Machinability of Cenosphere Particulate Reinforced AA6061 Aluminum Alloy Prepared by Compocasting”, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405417699013., March 2017.
  61. Dey, S. Debnath and K.M.Pandey, “Optimization of EDM Process Parameters for Al6061/Cenosphere Composite using Grey based Hybrid Approach”, Transaction of non-ferrous metal society China, Vol.27 May 2017, PP.998-1010.
  62. Abhijit Dey and Krishna Murari Pandey, Characterisation Of Fly Ash and Its Reinforcement Effect on Metal Matrix Composites: A Review, Reviews on Advanced Material Science, April 2016. Vol.44(2), PP.168-181, (SCIE Journal)
  63. Abhijit Dey and Krishna Murari Pandey, “Magnesium Metal matrix Composites – a review”, Rev.Adv.Mater. Volume 42,No. 1, PP.58-67, 2015(SCIE Journal).
  64. Yadav,.S., Das, K. and Pandey K.M. A comparative analysis of heat transfer in extended surfaces with and without holes, Lecture Notes in Mechanical Engineering Volume Part F8, 2017, Pages 421-429.
  65. Sharma and K. M. Pandey, Size control synthesis and characterization of ZnO nanoparticles and its application as ZnO-water based nanofluid in heat transfer enhancement in light water nuclear reactor, Kerntechniq, 82 (2017) 1; page 1–13, DOI 10.3139/124.110635.
  66. Sharma and K.M. Pandey, Facile synthesis of TiO2 nanoparticle and numerical investigation of nanofluids heat transfer characteristics for application in nuclear reactor using CFD Code has been published in Nanoscience and Nanotechnology Letters, Vol.8, pp.365-374, 2016.
  67. Rajat Gupta., Abhijit Sinha, Krishna Murari Pandey and Sanjay Kumar Dey, “Exergy analysis of coal fired tea drying furnace”, International Journal of Exergy, Volume 15(1) pp.. 54 – 732015, DOI 10.1504/IJEX.2015.069318, (SCIE Journal)
  68. Rajat Gupta., Abhijit Sinha and Krishna Murari Pandey “Computational Fluid Dynamics (CFD) study of tea withering trough considering leaf layer as porous medium”, Progress in Computational Fluid Dynamics, Volume14(5) PP. 304-315,. (DOI- 10.1504/PCFD.2014.064561.)(SCIE Journal).
  69. Ray M. and Pandey, K.M. Experimental studies on hydrodynamics of re-circulating fluidized beds, International journal of Turbo and Jet Engines, Volume 24(2), pp.75-84 2007, ISSN- 0334-0082. (SCIE Journal).
  70. Pandey, K.M. and Rathakrishnan E, Annular cavities for base flow control, International journal of Turbo and Jet Engines, Volume 23(2), pp.113-127, 2006 ISSN-0334-0082. (SCIE Journal)
  71. Pandey, K M and Rathakrishnan E, Influence of cavities in flow development in sudden expansion: a comparison between supersonic and subsonic flow regime, International Journal of Turbo and Jet Engines, Volume 23(2), pp. 97-112. 2006. ISSN- 0334-0082. (SCIE Journal).
  72. Kummitha, O.R., Suneetha, L., Pandey, K.M, Numerical analysis of scramjet combustor with innovative strut and fuel injection techniques, International Journal of Hydrogen Energy, 2017 Vol.42 (15), pp.10524.
  73. Debnath, K. M. Pandey, Numerical Investigation of Detonation Combustion Wave in Pulse Detonation Combustor with Ejector, Journal of Applied Fluid Mechanics, Vol. 10, No. 2, pp. 725-733, 2017, ISSN 1735-3572, EISSN 1735-3645
  74. Pandey, K.M., Chaurasiya, R., A review on analysis and development of solar flat plate collector, Renewable and Sustainable Energy Reviews, Vol-67, PP.641, 2017
  75. Ajoy Debberma and K.M.Pandey, CFD analysis of rewetting of a single sector AHWR fuel cluster with changing jet directions, Nuclear Engineering and Design Volume 308, November 2016, Pages 51–59 , https://doi.org/10.1016/j.nucengdes.2016.08.007
  76. Ajoy Debberma and K.M.Pandey, Numerical analysis on the effect of flow rates and jet diameters in rewetting vertical nuclear fuel bundles with jet impingements, Annals of Nuclear Energy, Volume 94, August 2016, PP.518-529 Elsevier Publications, DOI:10.1016/j.anucene.2016.04.023, SCI Journal.
  77. Debbarma and K. M. Pandey, “Influence on rewetting temperature and wetting delay during rewetting rod bundle by various radial jet models”, Kerntechnik, March 2016, Vol. 81, No.1 Pages 38-49, SCIE International Journal Published from Hanser E-library, Germany SCIE Journal.
  78. Chiranjib Bhowmik, Sumit Bhowmik, Amitava Ray and Krishna Murari Pandey, Optimal Green Energy Planning For Sustainable Development: A Review” Renewable and Sustainable Energy Review. Vol.71, PP.796.doi.org/10.1016/j.rser.2016.12.105
  79. Pinku Debnath and K.M.Pandey, Numerical Investigation of Detonation Combustion Wave in Pulse Detonation Combustor with Ejector, Journal of Applied Fluid Mechanics, 10 (2) pp. 725( www.jafmonline.net. SCIE Journal)
  80. Gautam Choubey and K.M.Pandey, Numerical studies on the performance of Scramjet combustor with alternating wedge-shaped strut injector, published in International Journal of Turbo and Jet Engines DOI: 10.1515/TIJ20150048, September, Published online on 9th Sept. 2015, De Gruyter Publications China, SCIE International Journal. Source Normalized Impact per Paper (SNIP): 0.749, (SCIE Journal).
  81. Mahto, N.K., Choubey, G., Suneetha, L., Pandey, K.M. Effect of variation of length-to-depth ratio and Mach number on the performance of a typical double cavity scramjet combustor, Acta Astronautica 128, PP.540, 2016
  82. K M Pandey, S.Roga and Gautam Choubey, Numerical Investigation on Hydrogen-fuelled Scramjet Combustor with Parallel strut fuel injector at a Flight Mach number of 6, April 2016 Journal of Applied Fluid Mechanics, Vol.9 No.3 PP.1215-1220, ISSN: 1735-3572, eISSN: 1735-3645 SCIE Journal
  83. M. Pandey, S. Roga and Gautam Choubey, “Computational Analysis of Hypersonic Combustor Chamber Using Strut Injector at Flight Mach 7,” Combustion Science and Technology. Taylor & Francis, Volume 187(9), pp. 1392-1407, September 2015 (SCI Journal) DOI: 10.1080/00102202.2015.1035371, SCI Journal.
  84. Pinku Debnath and K.M.Pandey, Exergetic Efficiency Analysis of Hydrogen-Air Detonation in Pulse Detonation Combustor Using CFD , International Journal of Spray Combustion and Dynamics,9 (1) PP.4, SCIE Journal,DOI:10.1177/1756827716653344, Sage Publications, online version
  85. Choubey G, Pandey KM, Effect of variation of angle of attack on the performance of two-strut scramjet combustor, International Journal of Hydrogen Energy (2016), Volume 41, Issue 26, 13 July 2016, Pages 11455-11470 http://dx.doi.org/10.1016/j.ijhydene.2016.04.048 Elsevier Publications , SCIE Journal
  86. Gautam Choubey, K.M. Pandey, Investigation on the effects of operating variables on the performance of two-strut scramjet combustor, International Journal of Hydrogen Energy (2016), Volume 41, Issue 45, 7 December 2016, pages 20753-20770, http://dx.doi.org/10.1016/j.ijhydene.2016.09.157
  87. Gautam Choubey, K.M. Pandey, Effect of parametric variation of strut layout and position on the performance of two-strut scramjet combustor, International Journal of Hydrogen Energy, Volume 42, Issue 15, 13 April 2017 http://dx.doi.org/10.1016/j.ijhydene.2017.03.014, Pages 10485-10500.
  88. Gautam Choubey, K.M. Pandey, Effect of strut +wall injection techninque on the performance of two-strut scramjet combustor, International Journal of Hydrogen Energy Volume42, Issue 18, 4 May 2017 http://dx.doi.org/10.1016/j.ijhydene.2017.04.024, Pages 13259-13275.
  89. M. Pandey, Gautam Choubey, Fayez Ahmed, Dilbahar Hussain Laskar, Pushpdeep Ramnani, Effect of variation of hydrogen injection pressure and inlet air temperature on the flow-field of a typical double cavity scramjet combustor, , International Journal of Hydrogen Energy, volume 42(2017), pp20824-20834.
  90. A Dey K M Pandey, Selection of optimal processing condition during WEDM of compocasted AA6061/cenosphere AMCs based on grey-based hybrid approach, Materials and Manufacturing Process, 2018 (Accepted) Taylor& Francis
  91. Obula Reddy Kummitha, Krishna Murari Pandey, Rajat Gupta, CFD analysis of a scramjet combustor with cavity based flame holders, Acta Astronautica, 144, 244-253, 2018
  92. Gautam Choubey, K. M. Pandey, Effect of different wall injection schemes on the flow-field of Hydrogen fuelled strut-based scramjet combustor, Acta Astronautica, 2018 (Accepted) [ELSEVIER] [IF = 1.536] doi.org/10.1016/j.actaastro.2018.01.034
  93. Saroj Yadav , K.M.Pandey , : A parametric thermal analysis of triangular fins for improved heat transfer in forced convection, Accepted for Publication in Strojniški vestnik- Journal of Mechanical Engineering, SCIE Journal

 NATIONAL JOURNALS

  1. Chandradeep Barman, K M Pandey, “CFD Analysis of Heat Transfer in sub channels of Nuclear Reactor using supersonic Freon R-12 as Coolant”, Journal of Emerging Technology In Mechanical Science and Engineering, Volume-5, Special Issue, pp. 71-76, March 2014, ISSN NO: 0976-2558
  2. L Choudhury, Gaurav Chaudhary, Abhijit Dey, K M Pandey, “Interlaminar Stress Analysis of Composite Laminates with External Ply drop using Finite Element Method”, Journal of Emerging Technology In Mechanical Science and Engineering, Volume-5, Special Issue, pp. 77-81, March 2014, ISSN NO: 0976-2558
  3. K M Pandey, Abhijit Dey, Gaurav Chaudhary, P.L. Choudhury, “Post Buckling of Circular Ring Stiffened Filament Wound Composite Pressure Vessels by Finite Element Page 29 of 52 Analysis”, journal of Emerging Technology In Mechanical Science and Engineering, Volume-5, Special Issue, pp. 82-86, March 2014, ISSN NO: 0976-2558
  4. Akash Raj, K M Pandey, “Burnback analysis of Axi-symmetric grain with truncated cone bore and aft end has cylinder cut-off and section of end burning grain in solid propellant rocket motor”, Journal of Emerging Technology In Mechanical Science and Engineering, Volume-5, Special Issue, pp. 66-70, March 2014, ISSN NO: 0976-2558
  5. P Debnath & K M Pandey, “Deflagration to Detonation Transition Enhancement in Pulse Detonation Engine Using CFD”, Journal of Emerging Technology In Mechanical Science and Engineering, Volume-5, Special Issue, pp. 1-5, March 2014, ISSN NO: 0976-2558
  6. Roga, K.K. Sharma and K.M. Pandey, “Computational Analysis of Supersonic Combustor Chamber Using Non-Premixed Combustion Model,” Journal Of Emerging Technology In Mechanical Science and Engineering, vol. 5, pp.120-125, ISSN No.: 0976-2558, March 2014.
  7. Roga and K.M. Pandey, “Computational Analysis of Scramjet Combustor Chamber Using Cavity Based Fuel Injector at Mach 4 Air Inlet,” Journal of Emerging Technology in Mechanical Science and Engineering, vol. 5, pp.103-108, ISSN No.: 0976-2558, March 2014.
  8. Gupta, R., Sinha, A., Pandey, K.M. and Dey, S.K. “Impact of health factors of female tea pluckers on the productivity of tea industries of Barak valley, Assam”, Accepted in Industrial Safety Chronicle- a journal of National safety council, Mumbai, India , Vol. XLIV (1), pp. 105-108, April-June, 2013.

 

 

 

INTERNATIONAL CONFERENCES

  1. Laser Beam Micromachining of Metals: A Review, Dhiraj Raj, B.V.R. Reddy, S.R. Maity, K.M. Pandey , 1st International Conference on Advances in Materials and Manufacturing Engineering(ICAMME-2018), January 24-25,2018 , Nagarjuna University, Guntur, Andhra Pradesh
  2. Effect Of Cold Rolling On Microstructural Properties Of Spray Deposited Al-%18Pb And Al-%22Pb Alloys, Bandi Venkata Ramana Reddy, Saikat Ranjan Maity, and Krishna Murari Pandey, 9th International Conference on Materials Processing and Characterization, GRIET, Hyderabad, March 8-10 2019.
  3. Effect of cold rolling on porosity, hardness properties of the spray deposited Al-18%Pb and Al-22%Pb Alloys, Bandi Venkata Ramana Reddy, Saikat Ranjan Maity, and Krishna Murari Pandey, 9th International Conference on Materials Processing and Characterization, GRIET, Hyderabad, March 8-10 2019.
  4. Manohar, G., Dey, A., Pandey, K.M. and Maity, S.R., 2018, April. Fabrication of metal matrix composites by powder metallurgy: A review. In AIP Conference Proceedings (Vol. 1952, No. 1, p. 020041). AIP Publishing.
  5. Tripathi, S. and Pandey, K.M., 2018, April. Review on factors affecting the performance of pulse detonation engine. In AIP Conference Proceedings (Vol. 1952, No. 1, p. 020090). AIP Publishing.
  6. Yadav, S. and Pandey, K.M., 2018, April. Study on effect of mixing mechanism by the transverse gaseous injection flow in scramjet engine with variable parameters. In AIP Conference Proceedings (Vol. 1952, No. 1, p. 020097). AIP Publishing.
  7. Alam, N., Sharma, K.K. and Pandey, K.M., 2018, May. Numerical investigation of combustion phenomena in pulse detonation engine with different fuels. In AIP Conference Proceedings (Vol. 1966, No. 1, p. 020015). AIP Publishing.
  8. Sahu, M.K., Pandey, K.M. and Chatterjee, S., 2018, May. Numerical investigation of thermal-hydraulic performance of channel with protrusions by turbulent cross flow jet. In AIP Conference Proceedings (Vol. 1966, No. 1, p. 020021). AIP Publishing.
  9. Jaiswal, S., Deoghare, A.B. and Pandey, K.M., 2018, January. Mass concentration analysis of aerosol through human airways. In 2018 2nd International Conference on Inventive Systems and Control (ICISC) (pp. 334-338). IEEE.
  10. P. Singh , Oveepsa Chakraborty and K. M. Pandey, CFD Analysis of Cavity Based Combustion of Hydrogen at Mach number 1.2” The 11th Asian International Conference on Fluid Machinery and the 3rd Fluid Power Technology Exhibition. Paper ID: AICFM_ES_002, November 21-23, 2011, IIT Madras, Chennai, India.
  11. K.Reddy, K. M. Pandey and A. P. Singh “Numerical Simulation with k-ε Turbulence Model for Combustion Chamber of Rocket Engines” The 11th Asian International Conference on Fluid Machinery and the 3rd Fluid Power Technology Exhibition. Paper ID: AICFM_ES_001, November 21-23, 2011, IIT Madras, Chennai, India.
  12. M.Pandey and S.S.Vel, CFD Analysis of Scramjet Combustor Using Strut with Circular and Planer Injector presented and published in IMECE2010, 2011 ASME International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, Colorado, USA(IMECE 2011-62310)
  13. M. Pandey and Surya Kumar, : Computational Simulation and Effect of Swirl Angle on Soot Formation of 2D Swirl Burner in Gas Turbine, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  14. M.Pandey, P.L. Choudury and N.Pradeep Kumar, Transient analysis of a thin film lubricated journal bearing at 1500 rpm, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  15. M.Pandey and S.N.Pandey, Comparative study of co2 capture and storage technology : A Review, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  16. Bose and K.M.Pandey, Structural failure analysis of rocket motors, 4th International Congress on Environmental Research, SVNIT Surat, India, December 15-17, 2011.
  17. M.Pandey, L.Roy and S.S.Saha, , CFD analysis for pressure and temperature and pressure of multi lobe bearings at 40,000 RPM for a gas turbine engine, Proceedings of IMECE2010, 2010 ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada(IMECE10-40136).
  18. M.Pandey, P.L.Choudhury and A.K.Singh,CFD analysis of journal bearing of steam turbine for 210 Mw power output , Proceedings of IMECE2010, 2010 ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada(IMECE10-37500)
  19. M.Pandey, D,H,Das and T.S.Dey, Numerical analysis of variation of pressure and velocity at inlet and exhaust of a turbo-jet engine with Fluent software, Proceedings of IMECE2010, 2010 ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada(IMECE-37500)
  20. M.Pandey, A.P.Singh and R.Sudarshan, CFD analysis of a Kaplan turbine at a head of 15 meters with Fluent software, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  21. M.Pandey and S.K.Yadav, : CFD Analysis for pressure and temperature for a rocket nozzle with two inlets at mach 2.1 and the comparison with single inlet, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  22. M.Pandey and S.N.Pandey, CFD analysis of combustion phenomena at high speed fuel inlet of Mach 0.9 for methane without bluff body, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  23. Sangeeta Pathak and K.M.Pandey, Experimental studies on genotoxic effects of pesticides on M1 generation of peas, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  24. M.Pandey and Videsh Roy, Intake valve design for high level swirl induction in carbureted park ignition engine, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  25. M.Pandey and A.K.Johri, A review on recent research in CFD area in context with hydraulic turbines, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  26. M.Pandey, D.H. Das and Amitava Roy, Numerical Studies on Variation of Pressure and Velocity inside the Combustion Chamber of a Turbojet Engine with Fluent Software, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  27. M.Pandey, A review on wind energy generation, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  28. M.Pandey, P.L.Choudhury and A.K.Singh, CFD analysis of horizontal axis wind turbine, 3rd International Congress of Environmental Research, September16-18, 2010, University of Mauritius, Reduit, Mauritius.
  29. M.Pandey Prateek Srivastava, K.C.Sharma and A.P.Singh, Study on supersonic flows in the De Laval nozzle at Mach number 1.5 and its base pressure in a suddenly expanded duct, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India.
  30. M.Pandey, P.L.Choudhury, A.P.Singh Amrit Kumar Singh and Kamlendra Singh, Cfd Analysis Of Journal Bearing Of Hydraulic Turbine For 210 Mw Power Output, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India.
  31. M Pandey, L.Roy, A.P.Singh, S.S.Saha, I. Haque, CFD Analysis For Pressure And Temperature of Multilobe Bearings At 20000 Rpm For A Gas Turbine Engine, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India.
  32. M.Pandey Prateek Srivastava, K.C.Sharma and A.P.Singh, Study on supersonic flows in the De Laval nozzle at Mach number 1.5 and its flow development in a suddenly expanded duct, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India.
  33. M.Pandey, Virendra Kumar and A P Singh, Study on free single jet flow: a numerical analysis with fluent software, the 10th Asian symposium on visualization, March1-5, 2010, SRM University, Chennai, India
  34. M.Pandey, Surendra Yadav and A P Singh, Study on rocket nozzles with combustion chamber, using fluent software at Mach 2.1, the 10th Asian symposium on visualization, March1-5,2010, SRM University, Chennai, India
  35. Sharma, R.Jagannath and K.M.Pandey, Wall Static Pressure Variation in Sudden Expansion in Flow Through Nozzles at Mach 1.74 and 2.23: A Fuzzy Logic Approach, The 2nd International Conference on Machine Learning and Computing (ICMLC 2010),Bangalore,India,February,9-11,2010, PP.243-247, ISBN 978-0-7695-3977-5
  36. M.Pandey, Studies on Base Pressure in Suddenly Expanded Circular Ducts: A Fuzzy Logic Approach, The 2nd International Conference on Machine Learning and Computing (ICMLC 2010), Bangalore, India, February 9-11, 2010, PP.237-242, and ISBN 978-0-7695-3977-5
  37. M. Pandey, A.P Singh and R. Sudersan, Computational studies on total pressure loss in De Laval Nozzle at Mach 2.1 in Sudden expansion duct with fluent software.3rd International Conference at advances in Mechanical Engineering, department of mechanical engineering, SVNIT Surat, Jan. 4-6, 2010, pp.224-228.
  38. M.Pandey and Amrit Sarkar, Thermal analysis of nuclear fuel elements with Ansys software, International Conference on Nuclear Engineering(ICONE-17) organized by ASME, Brussels, Belgium, July 12-16, 2009.The paper was presented but it is not published in the proceedings.
  39. Sangeeta Pathak and K.M.Pandey, Studies on doses of pesticideson mutations in seed character of the plants for a better environment, Proceedings of International conference on energy and environment, March 19-21, Taj Chandigarh, Chandigarh, India PP 778-780. Published online on World Academy of Science, Engineering and Technology, Volume 39, March 2009, ISSN 2070-3740.
  40. Deb Barma, K.M.Pandey and U Kumar, Review on noise pollution from internal combustion engines, Proceedings ofInternational conference on energy and environment, March 19-21, Taj Chandigarh, Chandigarh, India.PP.111-114 Published online on World Academy of Science, Engineering and Technology, Volume 39, March 2009, ISSN 2070-3740..
  41. Geeta Kumari, J.S.Virk and K.M.Pandey, Health effects of software people: an overview, Proceedings of the 6th AIMS International conference on management, Indian Business Academy, Greater Noida, December 28-31, 2008 PP.371-374.
  42. Geeta Kumari , K.M.Pandey and J.S.Virk Training and development needs of human resources in a software company: a case study of Cadtrium Engineering solutions Delhi, Proceedings of the 6th AIMS International conference on management , Indian Business Academy, Greater Noida, December 28-31, 2008 PP.365-370..
  43. Pandey K.M., Mohnish Kumar, Shushil Kumar and Amit Kumar, Studies on base pressure in sudden expansion in flow through nozzles at Mach number 2.4: A fuzzy logic approach, International Conference on recent advances in experimental fluid mechanics, K.L.College of Engineering, Vijaywada, and March 3-6, 2008.
  44. Pandey K.M., Mohnish Kumar, Shushil Kumar and Amit Kumar, Studies on wall static pressure in sudden expansion in flow through nozzles at Mach number 1.58: A fuzzy logic approach, International Conference on recent advances in experimental fluid mechanics, K.L.College of Engineering, Vijaywada, March 3-6, 2008.
  45. Amrit Sarkar and K.M.Pandey, Temperature distribution from a nuclear fuel rod using Pde tool of Matlab, International Conference on Modeling and Simulation, CITICOMS 2007, Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore, India, August 27-29, 2007
  46. Deb, U.Kumar and K.M.Pandey, Studies of reverberation time for the room with 200 KVA diesel generator set without enclosures, International Conference on Modeling and Simulation, CITICOMS 2007, Department of Chemical Engineering, Coimbatore Institute of Technology, Coimbatore, India, August 27-29, 2007.
  47. Geeta Kumari, Vandana Sharma and K M Pandey, performance evaluation of human resource in a small enterprise company, 8th International Conference on operations and quantitative management, emerging perspective of decision making in a new globalized world, theory, practices and future directions, AIMS International and ABAC School of management, Assumption University, Bangkok, Thailand, October , 17-20, 2007.
  48. Geeta Kumari, Vandana Sharma and K M Pandey, training needs identification in the development of software technology in a small enterprise, 8th International Conference on operations and quantitative management, emerging perspective of decision making in a new globalized world, theory, practices and future directions, AIMS International and ABAC School of management, Assumption University, Bangkok, Thailand, October 17-20, 2007
  49. Geeta Kumari, Vandana Sharma and K M Pandey and Sanjay Pandey, Training and development needs of human resources in a software company: a case study of Cadtrium engineering solutions (P) Ltd. Gurgaon, accepted in Guru Nanak Institute of Management and Technology Ludhiana in International Conference on Management challenges in the present era Institute of Management and Technology, May 05, 2007.
  50. Geeta Kumari, Vandana Sharma and K M Pandey, Human resource practices in private sector: a case study of Cadtrium engineering solutions (P) Ltd. Gurgaon, presented in International Conference on Research in Management and Technology, Gyan Jyoti Institute of Management and Technology, Mohali, Chandigarh, March 23-24, 2007
  51. Geeta Kumari, Vandana Sharma and K M Pandey, Advances in mechanical engineering software management, accepted in International Conference on Technology Management, Kolej University Technology, Tun Hussein Onn (KUiTTHO), Faculty of Technology management, Palm Garden Hotel, IOI Resort, Kuala Lumpur, Putryjaya, Malaysia, December 4-5, 2006
  52. M.Pandey and R. Deb, International conference on heat power cycles, Thermo economic optimization of solar driven irreversible heat engine, September 11-14, University of Newcastle, Newcastle, United Kingdom.
  53. M.Pandey and M. Mahesh, Determination of temperature distribution in a cylindrical nuclear fuel rod- a mathematical approach, International conference on heat power cycles, September 11-14, university of Newcastle, Newcastle, United Kingdom.
  54. M. Pandey and M Mahesh, and heat transfer analysis in a work roll in cold rolling process, 13 th International heat transfer conference, Sydney, Australia, 13-18 August 2006.
  55. M Ray, K.M. Pandey and P Mahanta, , 13th International heat transfer conference, Sydney, Australia, heat transfer characteristics of circulating fluidised bed ,13-18 August 2006
  56. M.Pandey and R. Deb, Thermoeconomics of an irreversible solar driven heat engine, Advanced computational methods in heat transfer IX, Wessex institute of Technology, Ashurt lodge, New Forest,U.K. July 5-7, 2006, PP 417-426 Witpress 2006, ISBN- 1-84564-176-0, ISSN 1743-3533 Online, ISSN- 1746-4471 Print.
  57. K M Pandey and D Sen, Energy Management: National Scenario, International conference on Challenges and Strategies for Sustainable Energy, Efficiency and Environment, UP Technical University Lucknow, 10-11 June 2006
  58. M.Pandey and Manoj Kumar, Commercial, Institutional and Industrial Recovery in Waste Management: A Case Study of West Virginia, 2nd International Conference on Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management, De La Salle University, Philippines, Hotel Hyatt Regency, Manila, Philippines,
  59. M.Pandey and Geeta Kumari, Present status of India in non-conventional power generation: an overview, The International Association of Science and Technology for Development-USA, International Conference on Power and Energy Systems(PES 2004), Clearwater Beach, Florida, USA, November 28 to December 01 2004.
  60. M.Pandey and Geeta Kumari, Recent advances in non-conventional energy systems: a case study of developments in India, The International Association of Science and Technology for Development-USA, International Conference on Power and Energy Systems (PES 2004), Clearwater Beach, Florida, USA, November 28 to December 01 2004.
  61. M.Pandey and Geeta Kumari, Usage of renewable energy: a solution towards environmental pollution control, The International Association of Science and Technology for Development-USA, International Conference on Power and Energy Systems (PES 2004), Clearwater Beach, Florida, USA, November 28 to December 01 2004
  62. M.Pandey and Geeta Kumari,, Review of media awareness to control environmental pollution: a case study of NIT Silchar, International Association of Science and Technology for Development-USA, International Conference on Environmental modelling and Simulation(EMS 2004), St. Thomas, Virgin Islands, USA, November 22 to 24 2004.
  63. M.Pandey and Geeta Kumari, Gasifier technology: a novel solution to rural energy requirements, presented in first International Conference on Renewable Energy organized by Central Board of Irrigation and Power, Le Mandarin Hotel, Jan path, New Delhi, Oct 6-8 2004
  64. M .Pandey, P. Jain , D. Dandotiya and A.K.Pandey, Recent advances in solar photovoltaic energy systems: an overview, 14th International Photovoltaic Science and Engineering Conference, Chulalongcorn University, Bangkok, Thailand, Jan.26-30, 2004.
  65. K. Pandey, K.M. Pandey and J.S. Virk, Pollution control of air” an overview, accepted in 12th International Scientific Symposium on Transport and Air pollution, Avignon, France, 16th – 18th June, 2003.
  66. M. Pandey and A.K. Pandey, Usage of non conventional power generation for controlling environmental pollution: – A case study of Silchar city, accepted in 12th International Scientific Symposium on Transport and Air pollution, Avignon, France, 16th – 18th June, 2003.
  67. Pandey K M and Dharmendra Kumar, Fast Discovery of Association Rules from Transaction Databases, presented in 47th congress of ISTAM, IIT Guwahati, Dec 23-26, 2002.
  68. Pandey K M and Dharmendra Kumar, Automated Speaker Recognition using Principal Component Analysis, presented in 47th congress of ISTAM, IIT Guwahati, and Dec 23-26, 2002.
  69. Pandey K M, Promoting and sustaining innovations in technician education and training, accepted in International Conference on Ship and Ocean Technology, Department of Naval Architecture IIT Kharagpur India, Dec 18-20, 2002.
  70. Virk J S and Pandey K M, Concept and Philosophy behind Competence-Based Training, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002.
  71. Sharma D K, and Pandey K M, Role of Various Agencies in Planning and Implementing Competence-Based Training In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002.
  72. Pandey K M, An Introduction to DACUM, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 133-140.
  73. Pandey K M and Satpathy K C, Competency-based technical education and training, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 117-132.
  74. Pandey K M and Satpathy K C, Design and Development of Instructional Material, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 108-116.
  75. Pandey K M, The implications of CBT: a case study of education in Australia, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 93-107.
  76. Pandey K M, Characteristics of Competency-based training programmes, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College for Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 78-92.
  77. Pandey K M, Workplace Competency: An Overview, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 65-77.
  78. Pandey K M, The Impact of CBT on Curriculum Process, In-Country Programme on Development of Competency-Based Curricula and Instructional Materials for Service Sector by Colombo Plan Staff College For Technician Education, Manila, Philippines in collaboration with Technical Teachers’ Training Institute- Chandigarh, Government of India, Chandigarh, India, Nov 11-22, 2002, pp 50-64.
  79. Pandey K M, Research based learning, In-country Programme on Promoting and Sustaining innovations in technician education and training for Philippines in collaboration with technical education and skills development authority (TESDA), Philippines by Colombo Plan Staff College for Technician Education, Manila, Philippines at TESDA conference room, Taguig, Manila, Sept 30 – Oct 11, 2002, pp 82-86.
  80. Pandey K M, Technological innovations: an overview In-Country Programme on promoting and sustaining innovations in technician education and training for Philippines in collaboration with technical education and skills development authority (TESDA), Philippines by Colombo Plan Staff College For Technician Education, Manila, Philippines at TESDA conference room, Taguig, Manila, Sept 30 – Oct 11, 2002, pp 52-62.
  81. Chaudhary D N and Pandey K M, promoting and sustaining innovations in technicians education and training, In-country programme on promoting and sustaining innovations in technician education and training for Philippines in collaboration with technical education and skills development authority (TESDA), Philippines by Colombo Plan Staff College For Technician Education, Manila, Philippines at TESDA conference room, Taguig, Manila, Sept 30 – Oct 11, 2002, pp 48-51.
  82. Chaudhary D N and Pandey K M, Management of technical innovations, In-country programme on promoting and sustaining innovations in technician education and training for Philippines in collaboration with technical education and skills development authority (TESDA), Philippines by Colombo Plan Staff College For Technician Education, Manila, Philippines at TESDA conference room, Taguig, Manila, Sept 30 – Oct 11, 2002, pp 43-47.
  83. Pandey K M and Pandey A K, Impact of Utilization of Non-Conventional Energy Sources on the Environment, accepted in World Renewable Energy Congress VII, Cologne, Germany, and June 29 – July 5, 2002.
  84. Pandey A K and Pandey K M, Recent advances in air pollution control, presented in International Symposium on Techno-Commercial and Decentralized Approach in Waste to Energy, Department of Mechanical Engineering, Malviya Regional Engineering College, Jaipur, India, and March 1-3, 2002.
  85. Participated in an International Conference on Recent Advances in Experimental Fluid Mechanics Dept of Aerospace Engg, IIT Kanpur as member of International Technical Committee, Dec 18-20, 2000.
  86. Pandey K M, Review on flow through nozzles in sudden expansion, 22nd International Symposium on Space Technology and Science, Morioka, Japan, May 28 – June 4, 2000, pp 968-973, ISTS 2000-e-20.
  87. Pandey K M, Redesign of solar cookers: An overview, International Conference on Energy Storage Technology and Systems (ICOESTS), School of Energy and Environmental Studies, Devi Ahilya University, Khandwa Road, Indore, Feb 1-4, 1999.
  88. Pandey K M, Experimental studies on influence of flow development in sudden expansion: a comparison between supersonic and subsonic flow regime, 8th International Symposium on Flow Visualization, Sorrento (NA), Italy, Sept 1-4, 1998.
  89. Pandey K M, Influence of cavities on flow development in sudden expansion: a case study in supersonic flow regime, Flucom ’97 Fifth Triennial International Symposium in Tokyo Sept 1-4, 1997.
  90. Pandey K M, Pressure loss in flow through nozzles with sudden expansion: a comparison between supersonic and subsonic flow regime, International Conference on Advances in Mechanical and Industrial Engg, Dept of Mechanical and Industrial Engg., Roorkee, India, Feb 6-8, 1997, pp 417-426, Ajay printers and publishers, Roorkee, India, Volume 2 ISBN- 81-86463-15-1
  91. Pandey K M, Base flow behaviour in sudden expansion: a comparison between supersonic and subsonic flow regime 20th International Symposium on Space Technology and Science, Tokyo, May 1996, ISTS 1996-d-11.
  92. Pandey K M, Studies on flow through nozzles in sudden expansion with passive control, International conference at IISc, Bangalore on recent advances in Mechanical Engineering, Dec 20-22, 1995, pp 1511-1518, Narosa publications, New Delhi, India, 1996, Volume 2 ISBN- 81-7319-089-5
  93. Pandey K M, Rathakrishnan E and Oberai M. M, Studies on flow development in flow through nozzles in sudden expansion with passive control, accepted in 19th International Symposium on space technology and science, May 15-24, 1994, Yokohama, Japan, ISTS 1994-d-10.
  94. Pandey K M, Studies on variation of pressure and lift coefficient as function of angle of attack using vortex based panel method for Jukowski aerofoil, International Conference on Computational Methods in Engineering, Nov 11-13, 1992, Singapore.

NATIONAL CONFERENCES

  1. Geeta Kumari, K.M.Pandey and A.K.Pandey, Innovative practices in performance appraisal in industries in India, National Conference on ‘Innovations in Business Horizons’ Department of Business Administration, Gurgaon Institute of Technology and Management, March 05 2010.
  2. Geeta Kumari, K.M.Pandey and A.K.Pandey, Energy Management in changing business scenario, National Conference on ‘Innovations in Business Horizons’ Department of Business Administration ,Gurgaon Institute of Technology and Management, March 05 2010 .
  3. Geeta Kumari, K.M.Pandey and A.K.Pandey, Management of technical education in India: an overview, National Conference on ‘Innovations in Business Horizons’ Department of Business Administration ,Gurgaon Institute of Technology and Management, March 05 2010.
  4. M.Pandey, S.Deb Verma, A.P.Singh, Akhilesh Kumar and U.Kumar, Computational analysis on controlling noise pollution from internal combustion engines, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  5. M.Pandey,P.L.Chaudhury, A.P.Singh, and Prateek Srivastava, CFD analysis of a journal bearing with fluent software, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  6. M.Pandey, A.P.Singh, Ankur, Sourav Gupta, R.Sudarsan and Issac, Computational analysis of noise pollution in a four cylinder Diesel engine with Fluent software, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  7. M.Pandey, A.P.Singh, P.L.Chaudhary, V.Bahuguna and Akhilesh Kumar, Some theoretical studies on gas foiled bearings, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19, 2009.
  8. M.Pandey, A.P.Singh, S.Pahari, and Prateek Srivastava, Flow analysis of convergent-divergent nozzle of minimum angle of divergence at Mach 3 using fluent software, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  9. M.Pandey, A.P.Singh, S.Pahari and Akhilesh Kumar, Flow analysis of convergent-divergent nozzles of maximum angle of divergence using fluent software at Mach 5, the 36 th National Conference on Fluid Mechanics and Fluid Power, Department of Mechanical Engineering, College of Engineering Pune, Maharastra, December 17-19,2009 .
  10. M.Pandey, S.Deb Verma, A.P.Singh, Akhilesh Kumar and U.Kumar, Computational analysis on controlling noise pollution from internal combustion engines, 7th national conference in modern trends in power engineering and power plants, department of mechanical engineering, college of engineering , Trivandrum, Kerala, 8-9 October 2009, PP 129-140.
  11. Geeta Kumari and K.M.Pandey, Recent advances in software technology related to mechanical engineering-accepted for presentation in 7th national conference in modern trends in power engineering and power plants, department of mechanical engineering, college of engineering , Trivandrum, Kerala, 8-9 October 2009.
  12. M.Pandey An analysis of flow development in a rectangular draft tube of reaction turbine with fluent software- 7th national conference in modern trends in power engineering and power plants, department of mechanical engineering, college of engineering, Trivandrum, Kerala, 8-9 October 2009, PP 35-41, and the presentation was considered one among top five presentations in the conference.
  13. Sanjay Pandey, Rajneesh Kumar, K.M.Pandey and L.Roy, FEA analysis of frame without cover plate, National conference on welding technology, Department of Mechanical Engineering, SLIET, Longowal, Punjab, February 13-14,2009
  14. Sanjay Pandey, Rajneesh Kumar, K.M.Pandey and L.Roy, Static strength analysis using finite element method, National conference on welding technology, Department of Mechanical Engineering, SLIET, Longowal, Punjab, February 13-14,2009.
  15. M.Pandey, S.Pahari, P.Satpathy, S.Das and S.Kumar, Numerical Studies on supersonic flow over a few blunt shaped bodies using fluent software, national conference on advances in mechanical engineering, department of mechanical engineering, Don Bosco Institute of Technology, Mysore road, Kumblagodu, Bangalore, March 30-31, 2009,PP 88-100.
  16. K.Yadav and K.M.Pandey, Studies on rocket nozzle with fluent software, national conference on advances in mechanical engineering, department of mechanical engineering, Don Bosco Institute of Technology, Mysore road, Kumblagodu, Bangalore, March 30-31, 2009PP.21-26..
  17. Virendra Kumar and K.M.Pandey, Studies on supersonic free single jet flow a numerical analysis with fluent software, national conference on advances in mechanical engineering, department of mechanical engineering, Don Bosco Institute of Technology, Mysore road, Kumblagodu, Bangalore, March 30-31, 2009PP.72-76.
  18. Amitabh Roy and K.M.Pandey, Numerical analysis of combustion chamber design of turbojet engine with fluent software, national conference on recent advances in mechanical engineering, department of mechanical engineering, NIT Silchar, Assam , December 20-21, 2008, PP 213-217.
  19. Pahari, P.S.Satpathy, S.Das, S. Kumar and K.M.Pandey, Numerical studies on supersonic flow over a wedge shaped body using fluent software, national conference on recent advances in mechanical engineering, department of mechanical engineering, NIT Silchar, Assam , December 20-21, 2008, PP 159-163.
  20. Anand, A.P.Singh and K.M.Pandey, An analysis on flow development in a conical draft tube of reaction turbine with fluent software, Fluid mechanics and fluid power conference at PES Academy Bangalore, Dec. 11-13, 2008.
  21. M.Pandey and A.P.Singh, Pressure loss in a suddenly expanded duct with cavity at Mach 1.74 from De Laval nozzle at cavity aspect ratio 1,Fluid mechanics and fluid power conference at PES Academy Bangalore, Dec. 11-13, 2008
  22. M.Pandey and A.P.Singh, Flow development in a suddenly expanded duct with cavity at Mach 1.74 from De Laval nozzle at cavity aspect ratio 1,Fluid mechanics and fluid power conference at PES Academy Bangalore, Dec. 11-13, 2008.
  23. M. Pandey and M.Mahesh, Management of technical education in India: An Overview, National Conference on management of technical education in new millennium, Media centre and continuing education centre, National Institute of Technical Teachers Training and Research, Sector 26, Chandigarh – 160019, November 16 – 18 2005.
  24. M. Pandey and M.Mahesh, Management of technical education in India: An Overview, National Conference on management of technical education in new millennium, Media centre and continuing education centre, National Institute of Technical Teachers Training and Research, Sector 26, Chandigarh – 160019, November 16 – 18 2005.
  25. Sanjay Pandey K.M.Pandey and P.L.Chaudhary, Static strength analysis using finite element method for water tank with belt using software ansys design space 6.1/7.1,National conference on advances in engineering design, department of mechanical engineering, NIT Hamirpur, 13-14 November 2008.
  26. Sanjay Pandey K.M.Pandey and P.L.Chaudhary, Static strength analysis using finite element method for water tank with belt using software ansys design space 6.1/7.1,National conference on advances in engineering design, department of mechanical engineering, NIT Hamirpur, 13-14 November 2008.
  27. Geeta Kumari, K.M.Pandey, P.L.Chaudhary, Disaster management for tourism : An overview, National seminar on earthquake hazard and disaster management of north-eastern states of India, Department of civil engineering, NIT Silchar, Assam, India , 18-20 October 2008, PP 427.
  28. Geeta Kumari, K.M.Pandey, P.L.Chaudhary, Management of hydro-electric power plants: An overview, National seminar on earthquake hazard and disaster management of north-eastern states of India, Department of civil engineering, NIT Silchar, Assam, India , 18-20 October 2008, PP 48-59.
  29. M.Pandey and A.P.Singh, Computational studies on total pressure loss at Mach 1.74 in suddenly expanded ducts with Fluent software, National Conference on Advances in fluid flow and thermal sciences (AFFTS2008), Department of Mechanical Engineering, SVNIT Surat, India, May 22-24, 2008, PP. D-79 to D-87..
  30. M.Pandey, D.H.Das, A.Ghoshal, M.Agarwal and G.Goswami, Modelling of a two dimensional combustion chamber having one inlet with Fluent software, Proceedings of National Conference on Advances in fluid flow and thermal sciences( AFFTS2008) , Department of Mechanical Engineering, SVNIT Surat, India , May 22-24, 2008,PP.A-20 to A-30.
  31. M.Pandey and P.L.Chaudhary, Environmental effects of hydro-electric power plants: an overview, presented in National workshop on engineering materials and equipments, NIT Silchar and Institute of public health engineers, India, Feb.15-16, 2008.
  32. M.Pandey and P.L.Chaudhary, Nuclear waste disposal and the effects on ground water pollution, presented in National workshop on engineering materials and equipments, NIT Silchar and Institute of public health engineers, India, Feb.15-16, 2008
  33. Pandey K.M., attended a seminar on strategic partnership program among National Institutes of Technologies Vis-à-vis Research and Academics, NIT Warangal, November 24-25, 2007.
  34. M.Pandey and Abhishek Kumar, An analysis of Vocational and Technical Education for Persons with Disabilities with emphasis on North East Region, National seminar on enhancing access and performance of disadvantaged sections of society in technical and vocational education, Media and continuing education centre, NITTTR, Chandigarh. March 22-23, 2007.
  35. Jagannath, N.G.Naresh, G.Sharma and K.M.Pandey, , Pressure loss in sudden expansion in flow through nozzles at Mach 1.74: a fuzzy logic approach, National Conference on recent advances in mechanical engineering, department of mechanical engineering, Baba Sahab Bhim Rao Ambedkar College of Agril Engg. And Technology, Etawa (U.P.) 28-29 March 2007
  36. Mohnish Kumar, Sushil Kumar, Amit Kumar and K.M.Pandey, Pressure loss in sudden expansion in flow through nozzles at Mach 2.75: a fuzzy logic approach, National Conference on recent advances in mechanical engineering, department of mechanical engineering, Baba Sahab Bhim Rao Ambedkar College of Agril Engg. And Technology, Etawa (U.P.) 28-29 March 2007.
  37. Deb, U. Kumar and K.M.Pandey, Noise reduction techniques in internal combustion engines: a review, National Conference on recent advances in mechanical engineering, department of mechanical engineering, Baba Sahab Bhim Rao Ambedkar College of Agril Engg. And Technology, Etawa (U.P.) 28-29 March 2007.
  38. Geeta Kumari, Vandana Sharma and K M Pandey, Advances in software technology management, presented in a national seminar on business transformation through technological integration, PIMT, Mandi Gobindgarh , Punjab,30 April 2007.
  39. Geeta Kumari, Vandana Sharma and K M Pandey, Advances in human resource management, presented in a national seminar on emerging trends in ICT enabled services, PIMT, Mandi Gobindgarh , Punjab,26 October 2006.
  40. M. Pandey and M. Ray, Experimental studies on heat transfer characteristics on circulating fluidized beds, Proceedings of National Conference on recent developments and future trends in mechanical engineering, N I T Hamirpur, India, Nov. 3-4, 2006 pp 33-45.
  41. M. Pandey and M.Mahesh, Steady state temperature distribution in a nuclear fuel rod, National conference on Mathematical and Computational Modelling, Department of Mathematics and Computer Applications. P S G College of Technology, Coimbatore, December 15-16, 2005.
  42. M. Pandey, K. Yadav and SBL Sachan, Empowering masses through Technology Applications and skills, National Seminar cum exhibition on empowering the masses through technology, Rural Development Department, National Institute of Technical Teachers Training and Research, Sector 26, Chandigarh – 160019, December 1 – 2, 2005.
  43. Sanjay Pandey and K.M.Pandey, Calculation of stresses and deformations based on finite element method for a.v.e. standard cabin using software ansys design space 7.1,All India Seminar on Emerging Trends in Mechanical Engineering, The Institution of Engineers(I) Haryana State Centre, NIT Kurukshetra,March 29-30 2005
  44. Pandey K. M. and Kumari Geeta, Recent advances in multimedia and web technology and it’s usefulness in web based education system, National Convention of Computer Engineers, Institution of Engineers, Kerala State Centre, Trivandrum, March 12-13, 2005.
  45. M.Pandey and M. Mahesh, Recent developments in India in wind energy system and the management: an overview, National Conference on Mechanical Engineering, Ghousia College of Engg, Department of Mechanical Engineering, Ramanagaram-571511, March11-12, 2005.
  46. M.Pandey, P.M.Boro, S.B.L.Sachan and K.C.Satpathy, Recent advances in information technology and information management: the Indian Scenario, presented in national seminar on ICT enabled education, National Institute of Technical Teachers Training and Research, Chandigarh, 17-18 Nov. 2004.
  47. M.Pandey, A.K.Pandey and S.B.L.Sachan, The impact of ICT on development of digital library system: an overview, presented in national seminar on ICT enabled education, National Institute of Technical Teachers Training and Research, Chandigarh, 17-18 Nov. 2004.
  48. M. Pandey and V.K. Sinha, Impact of technology on library services: A case study of academic library in China, training programme on IT applications in information management: issues, trends and challenges, NIT Silchar, March 1-10, 2004, pp 94-103.
  49. M. Pandey, Designing a library staff compute training programme: A case study of central library of NIT Silchar, training programme on IT applications in information management: issues, trends and challenges, NIT Silchar, March 1-10, 2004, pp 78-93.
  50. M.Pandey, Usage of renewable energy: a solution for environmental pollution control, National Seminar on Environment and Health, S.V.U. Engg. College Tirupati, Dec. 29-30, 2003.
  51. M.Pandey, Recent advances in air pollution control by using non-conventional energy systems, All India Seminar on Green Technology-Present and Emerging Need, The Institution of Engineers (India), West Bengal State Centre, Kolkata, Nov. 21-22, 2003.
  52. M. Pandey, V.K. Sinha and A.K. Pandey, Impact of Technology on library Services: A Case Study of Academic Library in China, National Seminar on Challenges in Delivering Quality Services in Management and Technical Libraries, April 25-26, 2003, T.A. Pai Management Institute, Manipal, Karnataka, India.
  53. M. Pandey, V.K. Sinha and D.Kumar, Recent Advances in Library Technology, SiS 2003 Proceedings, 21st Annual Convention and Conference, Society for Information Science, 9-11 April 2003, Central Library, Indian Institute of Technology, Roorkee, India, Vol.2, pp 511-524.
  54. M. Pandey and A.K. Pandey, Enhancement of Quality of Technical Education by Providing Digital Library: A Case Study of Central Library of NIT Silchar, SiS 2003 Proceedings, 21st Annual Convention and Conference, Society for Information Science, 9-11 April 2003, Central Library, Indian Institute of Technology, Roorkee, India, Vol.1, pp153-162.
  55. Pandey K M and Pandey A K, Impact on health of usage of non conventional energy system for controlling environmental pollution: – A case study of Silchar city, Fourth National Conference on Thermal systems, Department of Mechanical Engineering, BHUIT, Varanasi, India, Feb 22-23, 2003.
  56. Pandey K M, Strategic planning of technical institutions: limitations and remedies, reported to 90th Indian Science Congress, Bangalore University Bangalore, Jan 3-7, 2003.
  57. Pandey K M and Pandey A K, Health effects of air pollution due to non-conventional power generation: a case study of Silchar city, reported to 90th Indian Science Congress, Bangalore University, Bangalore, Jan 3-7, 2003.
  58. Dharmendra Kumar and Pandey K M, Studies on acyclic diagraphs and decyclization-presented in 89th Indian Science Congress, Computer Sciences Section, Lucknow University Lucknow, Jan 3-7, 2002. The paper was given 1st prize in poster presentation.
  59. Pandey A K and Pandey K M, Studies on air pollution from automobiles; an overview, presented in National Seminar on Energy and Environment, Anand Engineering College Agra, Dec 21-22, 2001.
  60. Dutta Pinak and Pandey K M, Analysis of turbulent flow over a backward facing step channel using NISA / 3D fluid finite element technique, presented in 46th Congress of Indian Society of Theoretical and Applied Mechanics, Department of Mechanical Engineering, REC Hamirpur (H.P.), Dec 19-22, 2001.
  61. Pandey A K and Pandey K M, Environmental characteristics of liquefied natural gas and liquefied petroleum gas and its effect on air pollution, accepted in National Conference on Recent Trends in Mechanical Engineering Research and Development, Department of Mechanical Engineering, JNTU College of Engineering, Anantapur (A. P.), Oct 18, 2001
  62. Pandey K M, Variation of pressure and lift coefficient as a function of angle of attach using vortex based Panel method for Jukowski aerofoil, 15th National Convention of Aerospace Engineers, Dept of Aerospace Engg. And Rocketry, BIT Mesra, Ranchi, Feb 23 -24, 2001, pp III.3 to III.3.5.
  63. Pandey K M, Influence of cavities on flow development in sudden expansion: a comparison between supersonic and subsonic flow regime, 15th National Convention of Aerospace Engineers, Dept of Aerospace Engg and Rocketry BIT Mesra, Ranchi.
  64. Pandey K M and Sharma K K, A review on recent advances in wind energy system, 3rd National Conference in Thermal Systems, Dept of Mech. Engg. BHUIT, Varanasi, Feb 17-18, 2001.
  65. Pandey K M, Computer aided design of pumps installed at Hindustan Paper Corporation Cachar Paper Mill, Assam, 3rd National Conference on Thermal System, Dept of Mechanical Engg. BHUIT, Varanasi, Feb 17-18, 2001.
  66. Pandey K M and Pandey S N, Status and problems of pumps in a paper mill: a case study of H.P.C. Panchgram, Cachar Paper Mill, Assam, 3rd National Conference on Thermal System, Dept of Mech. Engg. BHUIT, Varanasi, Feb 17-18, 2001.
  67. Pandey K M and Sharma K K, Recent advances in wind turbine: a review, National Seminar on Trends for Development of Regional Areas of Country with Limited Resources, Kumaon Engg. College Dwarahat, Almora (U.P), April 28-29, 2000.
  68. Pandey K M , S A Khan and Rathakrishnan E, Passive control of base flows, Proceedings of the National Seminar on Recent Advances in Experimental Mechanics, Dept of Aerospace Engg, IIT Kanpur, Mar 15-16, 2000, Allied Publications Ltd, New Delhi, India 2000 PP-57-71, ISBN – 81-7764-020-8.
  69. Pandey K M, Influence of hub tip ratio on design of propeller turbines of 2kW and 5kW output at Ultra low heads, 44th Congress of Indian Society of Theoretical and Applied Mechanics, Department of Mathematics and Humanities, REC Warangal, Dec 22-25, 1999.
  70. Pandey K M, Feasibility studies of wind power generation in Silchar Region, National Conference on Wind Energy Commercialisation NCWEC-99, Department of Mechanical Engineering, MACT Bhopal, Mar 5-6, 1999.
  71. Pandey K M, Effect of hub tip ratio on flow turning angle at varying speed of 1kW propeller turbine, 43rd Congress of Indian society of Theoretical and Applied Mechanics, Department of Mathematics and Computer Application, PSG College of Technology, Coimbatore, Dec 16-19, 1998.
  72. Pandey K M, Electric energy management of ultra low head hydroelectric power projects, All India Seminar on Electric Energy System Management-Indian Scenario, Department of Electrical Engineering, University of Roorkee, Roorkee, Sept 4-5, 1998, pp 6-9.
  73. Pandey K M, Pressure loss in flow through nozzles with sudden expansion: a case study in supersonic flow regime-23rd National Conference of Fluid Mechanics and Fluid Power, Civil Engg. Dept, MACT, Bhopal Dec 27-29, 1996.
  74. Pandey K M, Base flow in flow though nozzles with sudden expansion: a study in supersonic regime-2nd National Conference on Fluid Machinery, Dept of Mechanical Engg, PSG College of Technology, Coimbatore, India, June 28-29, 1996, pp 256-265, Allied publishers Ltd. New Delhi, India, 1996, ISBN- 81-7023-543-X.
  75. Pandey K M, Dhar N G and Pandey S K, Feasibility studies of micro hydel power plant at REC Silchar, National seminar on Power Scenario in India, Electrical Engg. Department, REC Hamirpur, India, 14-15 Oct, 1995.
  76. Pandey K M and Rathakrishnan E, Studies on base pressure oscillations in sudden expansion with passive control, Conference on Thermal System, Mech. Engg. Dept, BHUIT Varanasi, Jan 28-30, 1995.
  77. Pandey K M, Variation of base pressure in compressible subsonic regime of flow, 2nd National Conference on Thermal System, Mech. Engg. Dept, BHUIT Varanasi, Jan 28-30, 1995.
  78. Pandey K M and Rathakrishnan E, Base pressure Oscillation in sudden expansion with passive control, proceeding of national conference on fluid machinery, Department of production and machine tool engineering K.I. Somaiya College of Engineering Vidyabihar, Bombay, India, Mar 11-13, 1994, pp G10-1 to G10-7.
  79. Pandey K M and Rathakrishnan E, Pressure loss in sudden expansion with passive control, proceedings of national conference on Fluid Machinery, Department of Production and Machine Tool Engineering, K.I. Somaiya College of Engineering Vidyabihar, Bombay, India, Mar 11-13, 1994, pp G9-1-G9-5.
  80. Pandey K M, Studies on minimum fluidising velocities of large size wood charcoal particles, National Symposium on Experiment in Fluids, Department of Aerospace Engineering, IIT Kanpur, Uttar Pradesh, India, Dec 28-31, 1992, pp 266-275.
  81. Pandey K M and Gupta S N, Fluidisation of large size coal particles at moderate temperature, National Symposium on experiments in fluids, Department of aerospace engineering, IIT Kanpur, Uttar Pradesh, India, Dec 28-31, 1992, pp 180-187.
  82. Pandey K M, Studies on variation of vortex strength as a function of angle of attack using vortex based panel method for Jukowski aerofoil, National Symposium on Optimisation Techniques and Application, OPTEC-Ns92, Thiagrajar College of Engineering, Madurai, Tamil Nadu, India, July 2-3, 1992.

BOOK CHAPTER

 

WORKSHOP

CONFERENCE ORGANIZED

 

PHD SCHOLARS

 

Sl. No. Name of the Scholar Status Research Area Supervision
1

M.TECH. SCHOLARS

Roll Number Name Year

 Project Title

 

 

Comments